Wagner I.S. North America

10/16/2026

☀️ Did you know our North American headquarters in Plymouth, Minnesota sits under the largest rooftop solar array in the entire state?

3,700 solar panels cover every square foot of our 140,000 square foot roof - about 3 acres of panels generating 1.6 million kilowatts of electricity per year, enough to power roughly two thirds of the building. It went live in 2020 and it's still the biggest private rooftop solar installation in the state.

For Wagner, this isn't a trend - it's the philosophy. Sustainability is embedded in our long-term strategy as a company, from investing in renewable energy at our own facilities to developing finishing equipment that helps customers reduce material waste, lower emissions, and run leaner operations. Less overspray. Less energy. Less waste. That's the goal on both sides of the equation.

We build equipment that helps our customers run more efficient finishing operations, and we hold ourselves to the same standard.
🎥 https://youtu.be/kdmnZaEA0Nk?si=500kWJcxNrw-CwE1
🔗 https://www.wagner-group.com/us/our-company/sustainability/

Wagner SprayTech’s North American Headquarters in Plymouth, Minn., ...

10/15/2026

🐆 Sticky materials meet their match. The C.A. Technologies Panther 100G is purpose-built for glue, adhesive, and contact cement applications of all types.

The Teflon hard-coated body and air cap mean glue and adhesive residue wipes away instead of building up, cutting your cleanup time on every shift. Stainless steel fluid passages and a self-adjusting needle packing keep performance consistent from the first spray to the last.
Running waterborne adhesives? The P100G is available in an anti-shear internal mix configuration that atomizes water-based contact cements without disrupting their chemistry, so you get consistent bond performance on every panel.

Less downtime scraping gunk off your gun. More time getting product out the door.

Ask your authorized distributor which P100G configuration fits your adhesive.
🔗 www.spraycat.com

10/14/2026

🤖 Teach it once. Watch it coat perfectly, every time.

Wagner powder coating technology meets 3D.Aero precision in one automatic robotic system, and you can watch it run live at FABTECH next week!

Booth | South Hall, Level 1
📅 October 21-23 | Las Vegas Convention Center

🔗 wagnerindustrialsolutions.com/fabtech
🔗 https://www.fabtechexpo.com/

10/13/2026

📱 Your finishing line generates a lot of data. Are you using it?

Coatify is Wagner's web-based information and management platform for coating systems - accessible via PC, tablet, or smartphone from anywhere. It delivers live productivity monitoring, visualized key figures, maintenance alerts, job history with recipe and parameter tracing, and an interface for Wagner's remote maintenance service.

More transparency. Fewer surprises. Click the link below to explore the platform.
🔗 https://www.wagner-group.com/us/industry/products/coatify-platform/

10/12/2026

⚡ What if your powder coating system used 40% less energy without changing a single thing about your output?

Wagner's Energy Efficiency Package makes it possible. Built into Wagner automatic powder coating lines, the patented EEP reduces pressure loss across the recovery system so the fan motor works less to move the same volume of air.

Up to 40% lower energy consumption. 1 to 2% more powder recovered per cycle. Same output quality.

Less energy. More powder recovered. Zero compromise on performance.
🔗 https://www.wagner-group.com/us/industry/products/powder-coating/energy-efficiency-package/

10/09/2026

❓Did You Know? Transfer Efficiency Drives Better Finishing ❓

Transfer efficiency isn’t just a technical metric. It’s what separates a clean, controlled process from wasted material and rework.

Wagner and CAT spray guns are designed to put more coating on the part and less in the air. That means reduced overspray, easier cleanup, and more consistent results from the first part to the last.

When more material lands where it’s supposed to, finish quality improves and productivity follows.

That’s why transfer efficiency isn’t just about savings. It’s about better finishing, every day.

10/08/2026

The Cobra pump is designed for reliability in demanding liquid coating environments, including abrasive, corrosive, and high-viscosity materials.
Its low-pulsation design supports stable material delivery, helping improve finish consistency while reducing maintenance requirements over time.

Nicknamed the “Solvent Saver,” its quick-flush design can cut solvent consumption by up to 75% - saving time, material, and cleanup effort.
👉 https://www.wagner-group.com/us/industry/products/liquid-coating/product/cobra-40-10/

10/07/2026

Manual powder coating is often where flexibility matters most. Sprint 2 is designed for operations running a mix of part shapes, colors, and coating requirements throughout the day.

Features like Digital Surface Optimization help control powder output on complex parts, while AFC supports stable airflow for smoother, repeatable finishes. The goal is better coverage with fewer adjustments and less rework, without adding unnecessary complexity.

👉 https://wagnerindustrialsolutions.com/wis_sprint2

10/06/2026

🛫 Two weeks from today, we're heading to Las Vegas, and we can't wait to see you!

FABTECH runs October 21-23 at the Las Vegas Convention Center. Find Wagner at Booth S13022 in the South Hall, Level 1.

We'll have powder coating equipment running live, and you'll have a chance to enter to win a Rohner Powder Booth. No purchase necessary.

Mark your calendar, and come see it live at Booth S13022!

🔗 https://wagnerindustrialsolutions.com/fabtech-26
👉 https://www.fabtechexpo.com

10/05/2026

Dynamic 3D coating starts by scanning the part, then the guns move to match it, in and out, up and down, following the exact shape of the part. Every corner, edge, and recess gets the gun position it needs.

The result is precise coverage and low powder use, even on complex geometries.

Watch it work: https://www.wagner-group.com/us/industry/products/powder-coating/product/dynamic-3d-coating/

"**