Metal Forms Unlimited LLC

Metal Forms Unlimited LLC I specialize in the design, fabrication, modification, repair and installation of metal.

I fixed the broken steering plate on this 1974 Allis-Chalmers forklift a little while ago.
03/02/2022

I fixed the broken steering plate on this 1974 Allis-Chalmers forklift a little while ago.

It is about time I posted pictures of the last job I completed quite a few months ago. I had to go radio silent for a wh...
09/01/2021

It is about time I posted pictures of the last job I completed quite a few months ago. I had to go radio silent for a while, luckily, I am slowly ramping up to getting back to my normal and productive self. I am making many changes to my business, among them will be a store/line of various custom made items and products that will never stray from my fanatical level of quality, plus much more. I hope you all understand and I cannot wait to work on all kinds of new projects/jobs and get to meet some cool, new people. Many thanks from MFU LLC!

On 41 East Main St on the Starbucks side of the building, I tore out a badly rotted steel staircase leading from the basement of the building up to ground level, then rebuilt an entirely new staircase to match the pre-existing one. Myself and the customer were exceptionally pleased with how it came out!

Something pretty sweet showed up a few days ago and I finally got a chance to unbox it, put the wheels on, add fuel, oil...
09/18/2020

Something pretty sweet showed up a few days ago and I finally got a chance to unbox it, put the wheels on, add fuel, oil, etc. Now I will have the power to run all my tools and equipment when I have mobile jobs.

I have put up with a shop that is a sub-par level of organized and efficient, and it isn't going to clean itself! I boug...
09/14/2020

I have put up with a shop that is a sub-par level of organized and efficient, and it isn't going to clean itself! I bought two 32"x72" Craftsman storage cabinets and one of those 46" Yukon rolling boxes from Harbor Freight, with one heavy-duty drawer at the top and double doors for bulk storage at the bottom, plus divided organizers for drill bits, thread taps, riv-nuts, etc. Let's goooooo!!

A friend of mine has a mallet that he uses frequently for work. The two sided mallet features a brass face and a white p...
09/05/2020

A friend of mine has a mallet that he uses frequently for work. The two sided mallet features a brass face and a white plastic face (Delrin or UHMW), but he rarely needed or used the plastic side. I machined a solid steel mallet head/face that matched the existing threads of the mallet body. I fully polished it merely for initial representation value, even though it will start to rust almost immediately.

I'm almost done with the can filling assembly. It's a prototype and the next version should be able to fill multiple can...
09/04/2020

I'm almost done with the can filling assembly. It's a prototype and the next version should be able to fill multiple cans at the same time, with a more fine-tuned design. Excuse the terrible looking temporary spacer under the can. This assembly is designed to fill cans of various heights.

Done!!!!!!
08/23/2020

Done!!!!!!

Hey, look at some plastic (UHMW) hand k***s that I made on my metal lathe.
05/21/2020

Hey, look at some plastic (UHMW) hand k***s that I made on my metal lathe.

I welded up 39 mounts used for transporting a bicycle in the vertical position within a vehicle, plus 6 large 12-point s...
05/16/2020

I welded up 39 mounts used for transporting a bicycle in the vertical position within a vehicle, plus 6 large 12-point sockets welded to a 10" long piece of 1 1/4" square tube.

I'm getting closer to the completion of this 8' 6" long x 77 3/4" wide flat bed body with a multi-angle crane thing in t...
05/10/2020

I'm getting closer to the completion of this 8' 6" long x 77 3/4" wide flat bed body with a multi-angle crane thing in the rear and a 2,500lb electric winch mounted to the headboard.

I'm making a pair of 5lb sliding weights on my metal lathe for a third Lat Pulldown machine for my Marlton customer.
05/04/2020

I'm making a pair of 5lb sliding weights on my metal lathe for a third Lat Pulldown machine for my Marlton customer.

Here is the basic structure of the flatbed sitting on the frame of the truck, minus the rectangular tubes for the sides ...
04/29/2020

Here is the basic structure of the flatbed sitting on the frame of the truck, minus the rectangular tubes for the sides and back. It will have a headboard with a 2,500lb winch mounted to it, and then a 4ft tall x 5ft wide adjustable, folding crane-type assembly in the rear of the bed.

Address

Beechwood Avenue
Pitman, NJ
08071

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 10am - 2pm

Website

Alerts

Be the first to know and let us send you an email when Metal Forms Unlimited LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Metal Forms Unlimited LLC:

Shortcuts

Share

Category