French Oil Mill Machinery Company

Name: French Oil Mill Machinery Company
Address: 1035 W Greene Street, Piqua, OH, 45356, US
Telephone: +19377733420
Price range: $

Home
United States
Piqua, OH
French Oil Mill Machinery Company

Hydraulic press, rubber mixer, mechanical dewatering and drying screw press, and oilseed equipment.

09/10/2026

60% inlet moisture to 3-5% discharge, in one machine. The Super Dewatering Press takes synthetic rubber crumb to a level a standard dewatering press can't reach alone, which means a smaller dryer and lower energy cost across the line. Pilot trials available at our Innovation Center in Piqua. Booth 1158 at the Global Polymer Summit, September 29-30.

https://frenchoil.com/products/polymer-equipment/super-dewatering-press/?utm_source=facebook&utm_medium=social&utm_campaign=machine-spotlights-2026&utm_content=super-dewatering

09/08/2026

Large composite structures only mold right when pressure is even across the entire platen. French designed this 500-ton press for a defense industry manufacturer, with a wide T-slotted platen area, post-guided construction, and light curtain guarding on all sides. Find our engineers at CAMX 2026, Booth GG5.

https://frenchoil.com/industries/composite/?utm_source=facebook&utm_medium=social&utm_campaign=machine-spotlights-2026&utm_content=500-ton-defense

09/03/2026

Nine pressing surfaces, one controller, one footprint. This self-contained system runs three 10-ton compression presses, each with three daylights, for molding composite medical parts. Every platen has independent heat and cool set points. Meet our engineers at CAMX 2026, Booth GG5.

https://frenchoil.com/articles-events/custom-designed-hydraulic-system-with-three-presses-for-molding-composite-medical-parts/?utm_source=facebook&utm_medium=social&utm_campaign=machine-spotlights-2026&utm_content=three-press

09/01/2026

French engineers custom designed this 400-ton sideplate press for composite molding: 36" x 24" platens, a 38" daylight opening, and platen heating matched to the process, electric, oil, steam, water, or our UNI-TEMP heated platens. Talk composite molding with our engineers at CAMX 2026, Booth GG5, September 21-24 in Atlanta.

https://frenchoil.com/articles-events/custom-400-ton-hydraulic-press-composite-molding-system/?utm_source=facebook&utm_medium=social&utm_campaign=machine-spotlights-2026&utm_content=400-ton

08/27/2026

±.001". That's the combined deflection and machining error the ULTRIX 2,000-ton hydraulic press holds under full load, about one-third the variation typically found in precision presses. That stiffness means parts come out at consistent dimension with little post-press finishing and very low scrap. Our engineers will be at CAMX (Booth GG5) and the Global Polymer Summit (Booth 1158) this September.

https://frenchoil.com/ultrix-2000-ton-hydraulic-press/?utm_source=facebook&utm_medium=social&utm_campaign=machine-spotlights-2026&utm_content=ultrix

08/25/2026

September is show season for French. Three events, three booths:

CAMX 2026 | Atlanta | September 21-24 | Booth GG5. Composite molding press systems, including UNI-TEMP heated platen technology.

Global Polymer Summit | Louisville | September 29-30 expo | Booth 1158. Custom hydraulic presses, Techni-Mix mixers, and polymer dewatering systems.

OFI International | Amsterdam | September 21-23 | Booth 17. Oilseed preparation and pressing equipment.

Capital equipment decisions don't get made from a spec sheet. If you're evaluating equipment in any of these areas, bring a drawing, a material spec, or a problem you haven't solved yet. Our engineers will be at all three.

Event and booth details: https://frenchoil.com/articles-events/category/trade-shows/

08/13/2026

On this date 38 years ago, the Piqua Daily Call reported on a Piqua handshake with international reach.

Earlier that week, French Oil Mill Machinery Company President Daniel P. French greeted His Royal Highness Alaiyeluwa Oba Okunade Sijuwade Olubuse II, the Ooni of Ife, during a visit to Piqua.

According to the newspaper, the Ooni and a Nigerian delegation were in Ohio on a business trip to purchase Ohio products. The visit was part of an effort to strengthen ties between Ohio and Nigeria.

The photograph is a wonderful reminder that Piqua has long had connections reaching far beyond Ohio. Thirty-eight years later, French Oil remains proud to call Piqua home while serving customers around the world.

Archival image: Piqua Daily Call, August 13, 1988. Photo by Stephen Cook.

07/21/2026

The Achiever Screw Press is the workhorse of mechanical oilseed extraction. Rugged construction, reliable operation, and a long service life make it the go to choice for extracting oil from soybeans, sunflowers, canola, and more. French has supplied thousands of screw presses across more than 80 countries. Ready to work as hard as you do. https://frenchoil.com/products/oilseed-equipment/

07/09/2026

Not all hydraulic presses are created equal. French custom designs every press to your exact specifications. Heated platens, advanced control systems, vacuum capability, automation integration and more. Whether you are molding rubber components or forming composite aerospace parts, there is a French press engineered for the job. https://frenchoil.com/products/

07/07/2026

We’re honored to be recognized by Upper Valley Career Center and proud to support the UVCC Education Foundation’s 50th Anniversary Campaign.

French Oil Mill Machinery Company has valued our longstanding partnership with UVCC, helping create opportunities for students through registered apprenticeships, industry mentorship, and hands-on learning experiences. Investing in the next generation of skilled workers is an investment in the future of our local workforce.

Read more about this partnership and its impact here:
https://www.uppervalleycc.org/article/3022894

Address

1035 W Greene Street
Piqua, OH
45356

Telephone

+19377733420

Website

http://www.frenchoil.com/

Alerts

Be the first to know and let us send you an email when French Oil Mill Machinery Company posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Equipment Service in Piqua?