Mayfield Metal Works

Mayfield Metal Works General machining, welding and custom fab. Weld repairs on all types of metal. We build 4x4 roll cag Mobile welding and repair services. Trailer repairs. Fencing.

Custom fabrication, welding repair of all types of metals including steel, stainless steel, aluminum and cast iron and cast aluminum. Handrails. General manual machining services.

Built these 2 sets of gates a few weeks ago and had them powder coated. Installed last week at a new housing development...
05/18/2025

Built these 2 sets of gates a few weeks ago and had them powder coated. Installed last week at a new housing development in OKC. Customer will have operators installed and stone work around columns.





#7018



Here is a set of brass bolts I machined and finished to replicate the original 100+ year old hardware for a set of origi...
03/29/2025

Here is a set of brass bolts I machined and finished to replicate the original 100+ year old hardware for a set of original doors at University of Oklahoma in Norman, OK.

Machined from 1” hexagonal brass bar stock and the sanded to give it the “umbrella” shape on the heads. Next everything was polished with scotchbrite pads and then brass polishing compound. I replicated the hammered finish using a hammer and custom ground punch. After a good cleaning and degreasing the parts were aged with a browning solution to age them and match the original patina as closely as possible.

Last few pictures show the entryway and doors and bolts installed








Braze repair on cast pump housing and inlet housing that froze. Customer had opened the drain before a hard freeze but t...
03/16/2025

Braze repair on cast pump housing and inlet housing that froze. Customer had opened the drain before a hard freeze but the drain was plugged with dirt.






Welded up 181 of these aluminum tools for a local machine shop. I do these every few months, but usually smaller batches...
03/15/2025

Welded up 181 of these aluminum tools for a local machine shop. I do these every few months, but usually smaller batches.

12/08/2024

Me and the girls in our 1970 M-813 5 ton 6x6 in the Piedmont Christmas parade.

11/27/2024

First time TIG welding and she nailed it! Tacking parts together for Dad to weld out.

Beautiful sunset after 2 days of storms. 10+” of rain in less than 2 days after months of drought with more to come tomo...
11/04/2024

Beautiful sunset after 2 days of storms. 10+” of rain in less than 2 days after months of drought with more to come tomorrow.






Cool pic. Nothing else to add.
08/17/2024

Cool pic. Nothing else to add.





Eat. Sleep. Weld. RepeatSmall batch of 56 aluminum tools/fixtures.
07/26/2024

Eat. Sleep. Weld. Repeat

Small batch of 56 aluminum tools/fixtures.







Rush emergency repair for repeat client. Heat exchanger for some type of machine shop equipment. Mild steel thin wall 1”...
07/26/2024

Rush emergency repair for repeat client. Heat exchanger for some type of machine shop equipment. Mild steel thin wall 1” OD tubing (.030”-ish). TIG welded with .035 filler at 25 amps to close the holes. Test to 20 psi to check for leaks. Cleaned them up and then plated the area with some .060”-ish thick saddle plates. Welded all around at 35 amps. Pressure test to 60 psi as per customer request.






Chicken coop gate build. Galvanized 3” square tube.
07/24/2024

Chicken coop gate build. Galvanized 3” square tube.




Address

11 Richland Road SW
Piedmont, OK
73078

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 5pm

Telephone

+14054438093

Website

Alerts

Be the first to know and let us send you an email when Mayfield Metal Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share