Articulate Motion Engineering

Articulate Motion Engineering Welcome to Articulate Motion we specialize in 3D Scanning, Reverse Engineering, Design, and Fabricat

We have some of the best friends and customers in the world. It's nice to be a small part of the off-road community. We ...
12/30/2021

We have some of the best friends and customers in the world. It's nice to be a small part of the off-road community. We put this frame together with Tom Shaw to display one of the stars from Danny Foddrills off-road hall of fame induction! Congratulations Danny!

This set of parts was rough scanned and autosurfaced for a quick, highly detailed CAD model. Once assembled we located t...
06/02/2020

This set of parts was rough scanned and autosurfaced for a quick, highly detailed CAD model. Once assembled we located the exact location for the caliper and made a caliper bracket from the assembly.

Our new website is up and running!  https://articulatemotion.com/The primary focus is to showcase some of our   processe...
01/10/2020

Our new website is up and running! https://articulatemotion.com/
The primary focus is to showcase some of our processes through and 3d probing. Check it out and contact us if there is anything we can help you with.


We were asked to design a fixture table for   aluminum  . It needed to work for all of the company's frames; Standard si...
07/10/2019

We were asked to design a fixture table for aluminum . It needed to work for all of the company's frames; Standard single and double wide frames both 16.25" and 12" centers, guardrails, locate castings for folding and stairwell frames. The challenge was to consolidate all of the table functions with minimal modification for different frames. After a few revisions, a final table was .

A few weeks back we were asked to help a   make a set of brake pads for a 2002 G-force  . The calipers were made by   bu...
06/11/2019

A few weeks back we were asked to help a make a set of brake pads for a 2002 G-force . The calipers were made by but pads were unavailable. We the pad using our , cut backing plates and sent them off to brakes to bond a high temperature race compound.

  H2 wheel from   to    . The 3rd picture is a color map used to compare the accuracy of the   model to the   data.     ...
04/16/2019

H2 wheel from to . The 3rd picture is a color map used to compare the accuracy of the model to the data.

This was a fun project with Old School Motorcycle Company to redesign their oil tank using  . So many different ways to ...
02/22/2019

This was a fun project with Old School Motorcycle Company to redesign their oil tank using . So many different ways to use the for and .

All buttoned up! All panels were digitized using the     and  , then   cut and formed. Great way make future changes or ...
02/22/2019

All buttoned up! All panels were digitized using the and , then cut and formed. Great way make future changes or repanel the car.

Thanks  for letting us take your   out to the   garage tour. We are having a blast! Already stopped at       and   next ...
11/15/2018

Thanks for letting us take your out to the garage tour. We are having a blast! Already stopped at and next it's off to in fountain hills and tomorrow!

We are working hard to get  rock crawler ready for an event in a few weeks. When it came time to build the floor there w...
10/19/2018

We are working hard to get rock crawler ready for an event in a few weeks. When it came time to build the floor there was no time to waste. After a quick discussion we decided to the tubing around the foot well and design sheetmetal to fit. This also helped us make a bracket for the brakes and orbital valve. Once the area was we can the sheetmetal part, make a flat pattern for the then cut and form the floor.


Before we had our 3D scanner fully operational, we used the   probe for everything. Now we commonly use the probe for pr...
09/13/2018

Before we had our 3D scanner fully operational, we used the probe for everything. Now we commonly use the probe for prismatic machined parts and the 3D scanner for complex surfaces and organic parts. Both can be combined for the best of both worlds. This is a probe only AGB sequential 5 speed out of a car

Address

2915 N 29th Drive #18
Phoenix, AZ
85017

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

(602) 330-4928

Alerts

Be the first to know and let us send you an email when Articulate Motion Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Articulate Motion Engineering:

Share