Valley Saw Service Inc

Valley Saw Service Inc Valley Saw Service has provided quality saw sharpening services to the Greater Phoenix area since 1967. offers sharpening, repair and new sales.

Valley Saw Service is serving the Phoenix valley since 1967, Valley Saw Service Inc. Everything from carbide tipped saw blades, band saw blades made-to-order, router bits, cutters, and knives. We offer commercial pick-up and delivery. Call today for a free quote!

08/02/2023

While changing tools based on past patterns is a reliable way to make sure only the sharpest tools are in operation, it is not a foolproof system. Regular monitoring is still needed so that problems can be intercepted before an entire run is ruined.

07/28/2023

Depending on the material, different relief and rake angles are needed for the critical faces of lathe cutters. In general, the harder the material being sharpened, the smaller the rake angles. The softest materials have the greatest angles.

07/26/2023

If your services require performing millwork, you cannot afford the shoddy work that dull bits produce. When we refurbish helix head mills, we create properly sharpened surfaces that both cut and have enhanced chip evacuation.

07/21/2023

If you don’t have a hedge trimmer around, you can make do with a pair of pruning shears. These scissor-like cutting tools feature long blades that easily cut through bushes, thus making them very effective at getting the job done.

07/19/2023

One important practice in sharpening is balance. The same amount of material must be removed from all cutting edges or the tool will fall out of balance. If an imbalanced cutting tool is used, it can damage both the machine and the product.

07/14/2023

Feed rate and cutting ability can be improved by upgrading the cutting tools used for boring. For example, a twin bore allows doubling of the feed rate and removes almost four times more metal during the process.

05/12/2021

As with anything, your tools require proper maintenance in order to uphold their integrity and durability, as well as their daily effectiveness on the job. Investing in regular professional sharpening services is an excellent way to take care of your tools.

05/07/2021

When ordering carbide-tipped cutters, keep in mind that they do not need as many teeth as a similar cutter made from high speed steel (HSS). Because carbide tipped tools run at higher speeds, more material is removed, and fewer teeth mean proper chip evacuation.

05/05/2021

Modern saws have an alternating set of teeth. In Ancient Egypt, however, saws had teeth projecting only on one side. Although saws were prominent in Ancient Egypt, according to Chinese legend it was a Chinese man who invented the saw.

04/30/2021

SMC slitters offer manually controlled as well as pre-programmed cuts. They are equipped with fully-guarded operator safety features including E-stop switches on both sides of the operator’s station and have fail-safe reset processes.

04/28/2021

There’s very little that will annoy a home chef more than a knife that isn’t sharp enough. A dull knife forces the cook to work twice as hard. It also results in ragged cuts on the ingredients instead of clean ones, which can affect recipes and the finished dishes.

04/23/2021

If you are having problems with chip production during deep cutting operations on aluminum, consider a slight increase in feed rate. If the cutting depth and feed rate can be adjusted equally, tinker with both until the best results are obtained.

Address

712 N 35th Avenue
Phoenix, AZ
85009

Opening Hours

Monday 6am - 3:30pm
Tuesday 6am - 3:30pm
Wednesday 6am - 3:30pm
Thursday 6am - 3:30pm
Friday 6am - 3:30pm

Telephone

(602) 272-4082

Website

Alerts

Be the first to know and let us send you an email when Valley Saw Service Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Valley Saw Service Inc:

Shortcuts

Share

Category