SteelX Rebar

02/18/2026

https://youtu.be/TCApABvEUSY Concrete is brittle and shatters when a bullet or a big enough blast wave hits it. When you add SteelX mini rebar the concrete becomes blast and ballistic resistant. email [email protected] for more information.

Concrete is brittle. It easily shatters when hit by a bullet or under blast pressure. Adding SteelX mini rebar to plain concrete or 3D printed concrete make ...

12/04/2025

12/02/2025

12/02/2025

SteelX blast test 3D printed concrete

11/11/2025

What a fun project! This 700' long driveway is two 5' wide concrete strips separated by a 2' grass median. It has 11.25lbs/cy of SteelX and both E5's Liquid Fly Ash and Internal Cure added to the concrete. It is 7" thick and has saw cuts at 30'. If you are in the concrete business, you know that a 5' x 30' aspect ratio is at very high risk for uncontrolled cracking when using normal concrete. Well, SteelX reinforced nano silica modified concrete isn't normal concrete; it's game changing concrete. Most of the saw cuts have activated, but no cracks have been observed between saw cuts.

08/16/2025

https://www.youtube.com/watch?v=p9-iUEGY_9E 3D Printed concrete is normally high strength, but that makes it brittle. The concrete in the featured video is about 10,000psi and each pass is 1.5" thick. In testing it kept shattering with the impact of a rifle round, even a 5.56mm. Once SteelX was added to the mix there was no issue with printing and it prevented brittle failure. If you add SteelX to your printer mix, you will print steel reinforced ballistic resistant structures. Moreover, it will prevent someone from just knocking a hole in the wall with a few swings of a hammer.

SteelX reinforced high strength concrete is a game-changer! Did you know that 10,000 psi 2" thick 3D printed concrete shatters when a bullet hits it? That is...

08/06/2025

With Franz Crete LLC – I just got recognized as one of their top fans! 🎉

07/23/2025

🚧 Reinforce Smarter with SteelX Twisted Rebar! 🚧

Why stick with old rebar and mesh when SteelX gives you stronger, safer, and faster results? Twisted Steel Reinforcement (TSR) – SteelX 5:25 – isn’t just another fiber. With its unique torsional anchorage, it activates before cracks appear, locking into the concrete like a true composite and providing stable post-crack strength.

steelxrebar.com

🏗️ Built for real job sites:

Superior bonding: Exhibits 2–5× greater pull-out force vs. standard steel fibers

steelxrebar.com

Jobsite safety: Slash injuries from wire mesh placement—no cutting, lifting, or tying!
LinkedIn

Steel and Concrete Professionals

Faster build times: Mix it directly into concrete—no more rebar crew delays or inspection hold-ups

steelxrebar.com

Quality boost: Improves first-crack strength, minimizes shrinkage, and controls micro‑cracks before they form dominant cracks.

🔥 Versatile use cases:
Foundation slabs, footings, shotcrete for mining or walls, composite slab on metal deck, precast tanks, heavy‑load pavements, commercial and industrial floors — you name it, SteelX has got it covered.

📞 Ready to streamline your next project and get serious reinforcement? Drop SteelX into your mix and see the difference. Visit steelxrebar.com or contact your local SteelX rep today.

07/22/2025

We are honored that HOLCIM has decided to use our product in their San Salvador facility. SteelX helps preserve the future of our planet by providing even stronger and more efficient tensile and sheer reinforcement for concrete with less steel than traditional reinforcements. You can take a step towards sustaining the planet too by choosing SteelX.

03/26/2025

https://youtu.be/HOvR6dDkbPI?si=4NMBmv1bPxuBCoYZ