Spray equipment and Coatings-sprayez

Spray equipment and Coatings-sprayez Spray Equipment And Coatings your leading supplier and manufacturers of Spray Urethane Foam, Polyurea, and dispensing equipment in the world today.

Built by one of the most trusted names in the industry, the Graco E-30 Reactor 2 promises to revolutionize the way you r...
08/24/2020

Built by one of the most trusted names in the industry, the Graco E-30 Reactor 2 promises to revolutionize the way you run your business.

With advanced control modules, a more compact and easier to service frame, and better spraying performance than the traditional electric Reactor systems the E-30 can even help you monitor live jobs when you upgrade to the Graco In-Site Remote Reporting Elite.

From Spray Polyurethane Foam and Plural Component Protective Coatings, to Roof Coatings, the E-30 has you covered.

Of course if you're looking for similar results with a lower price tag, the PMC PH-40 can be a great alternative! Both machines are available for purchase as single system or bundled in one of our rig packages available for purchase at www.SprayEZ.com

Have you heard? Rockhard Bedliner does more than just truck liners!Rockhard Spray-on Bedliner is a VOC-free plural compo...
08/23/2020

Have you heard? Rockhard Bedliner does more than just truck liners!

Rockhard Spray-on Bedliner is a VOC-free plural component polyurea that sprays on seamlessly to become a 3 dimensional rust barrier to whatever surface you apply it on and is guaranteed to hold its shape for the life of your vehicle.

The best part? This product is super DIY friendly and is available as a starter kit on our website! Kit includes Spray EZ, a case of black polyurea, static mixing tubes, 6-inch abrasive filament Cup Brush, and 90ft roll of WireTrime Trim Tape, while supplies last.

https://sprayez.com/product/rockhard-bedliners-starter-kit/

Are you seeing an increasing build up of crystallized isocyanate in your A-side drums? Here's why.When humidity is allow...
08/22/2020

Are you seeing an increasing build up of crystallized isocyanate in your A-side drums? Here's why.

When humidity is allowed to mingle with iso, the chemicals will begin to crystallize causing clogged screens and scratched up pump seals. To combat this, we recommend that our clients do 1 of 2 things.

First, we recommend that you try to tightly re-thread your A-side pump into the drum. If you find that you can't this could be a sign that you'll need to replace the collar on the pump.

Second, consider purchasing a desiccant air dryer. This cheap fix will allow for dry air to enter a small hole located on your Iso drum so that you don't accidentally create a vacuum within the drum while you're working.

Just remember to keep checking the dryer in between jobs, once the beads inside start turning pink, you'll know it's time to change out dryers.

Read more at http://sprayez.com/product/drierite-desiccant-air-dryer/

Photo courtesy of mt.com

4 Tips from the experts on picking the right generator for you:1) Make a list of system components and their peak load r...
08/21/2020

4 Tips from the experts on picking the right generator for you:

1) Make a list of system components and their peak load requirements in watts
2) Total up the wattage requirements of these system components
3) Multiply the total wattage by 1.25 to determine kVA (kilovolt amperes)
4) Choose a generator size that is equal to or greater than the determined kVA.

If you need more help in picking out the right equipment for your rig, our experts are always standing by

Introducing the Plural-Component GX-7 Spray GunFor high output spray polyurethane foam and polyurea applications. Whethe...
08/20/2020

Introducing the Plural-Component GX-7 Spray Gun

For high output spray polyurethane foam and polyurea applications. Whether you’re spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties – giving you great results at the jobsite.

See it in action on https://sprayez.com/product/graco-gx7-spray-gun/

Designing a custom Spray Foam, Roofing, or Concrete Jacking Rig? Don't forget to add a custom wrap to the order!Fully cu...
08/19/2020

Designing a custom Spray Foam, Roofing, or Concrete Jacking Rig? Don't forget to add a custom wrap to the order!

Fully customizable, these wraps are guaranteed to bring in calls for your business with every mile you drive!

Get started today at: http://sprayez.com/s…/spray-foam-insulation-custom-trailers/

Expandothane Seamless Roofing SystemOutperforming acrylic, urethane, asphalt.... (we could continue, but you get the poi...
08/18/2020

Expandothane Seamless Roofing System

Outperforming acrylic, urethane, asphalt.... (we could continue, but you get the point, Expandothane is one tight mother!) Features:
✅ Reflects heat and UV rays drastically cutting down on energy bills
✅ Superior adhesion and flexibility
✅ Long lasting waterproof seal
✅ VOC free

Are you leaving money on the table?Creating an efficient moisture barrier is an absolute must for preserving the integri...
08/17/2020

Are you leaving money on the table?

Creating an efficient moisture barrier is an absolute must for preserving the integrity of foundation walls, but the foundation walls can't always do it by themselves.

That's why you should always suggest to your clients to spray the foundation with at least 2" closed cell foam (roughly 14-20 R-values) in order to ensure that moisture stays out and the foundations remain strong.

Shop the Most Efficient Foam Cutter on the MarketDesigned with precision-made aluminum parts and the highest quality bea...
08/16/2020

Shop the Most Efficient Foam Cutter on the Market

Designed with precision-made aluminum parts and the highest quality bearings and powerhead, the Closed Cell C I Cutter is one of the most valued pieces of Spray Foam Equipment and Accessories for the day-to-day closed-cell foam installer. Spouting rectangular shaped teeth, the C I Cutter will easily cut around studs, electrical outlets, wiring and plumbing leaving minimal damage in its wake.

Sporting a 120-volt Mikita electric motor, the C I Cutter will dependably handle every job you throw at it all without the need for large air compressors or air hoses.

Product Details
Cutter Size: 27.5 inches
Includes a drill attachment
Features important safety features such as chain break system and guards
Capable of cutting both Open Cell and Closed Cell Foam

Order today: https://sprayez.com/product/closed-cell-ci-cutter-27ccc/

😬 Have you noticed a slow down in your spraying equipment? ⁠⁠Don't panic, this is most likely due to a build-up isocyana...
08/15/2020

😬 Have you noticed a slow down in your spraying equipment? ⁠
⁠
Don't panic, this is most likely due to a build-up isocyanate in your lines, the good news? ⁠
⁠
You aren't going to have to replace your hose, instead pick up a gallon of Dynasolve isocyanate cleaner. ⁠
⁠
Hugely effective, this cleaner will get your spray equipment acting like new! ⁠
⁠
Check out our ad on Ebay or visit https://sprayez.com/product/dynasolve-cu-6-urethane-cleaning-solvent/

Just starting out in the Industry? Here's our top tips on outfitting your new businessTip #1: Invest in quality safet...
08/14/2020

Just starting out in the Industry? Here's our top tips on outfitting your new business

Tip #1: Invest in quality safety gear- This includes a full-body protective suit, full face mask with protective shield and v***r cartridges, and black nitro gloves.

Tip #2: Ensure the area you're spraying is dry- foam won't stick to a surface whose moisture level is above 20%

Tip #3: Cover all windows, doors, lights, outlet boxes, switches, window frames, etc before you start spraying- while there are products that we can suggest that will remove any foam that happened to get on these areas, it's better to remove the possibility of getting foam on them in the first place (especially if you have paint on these surfaces)

Tip #4: Always ensure that your foam is properly heated before spraying- check with your TDS's if you aren't sure what temperature you need to be at before spraying Have a question/comment? Let us know in the comment section!

Looking for the perfect proportioner system?⁠⁠If you cater specifically to the residential crowd, then the PMC PH-2 may ...
08/12/2020

Looking for the perfect proportioner system?⁠
⁠
If you cater specifically to the residential crowd, then the PMC PH-2 may be just what you need!⁠
⁠
Offering the Most Affordable Hydraulic Proportioner with Horizontal Pumps. The PMC PH-2 includes a Pressure Balance Control System, Inlet Monitoring and Count Down Shutoff.⁠
⁠
Check it out at https://sprayez.com/product/pmc-ph-2-hydraulic-3ph-rv-120t-10-5kw-105544/

Address

555 N Ann Arbor Avenue
Oklahoma City, OK
73127

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

(877) 274-4491

Website

Alerts

Be the first to know and let us send you an email when Spray equipment and Coatings-sprayez posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Spray equipment and Coatings-sprayez:

Shortcuts

Share