Taylor Valve Technology

09/04/2026

Wishing you a restful and relaxing Labor Day.

Taylor Valve's Offices will be closed Monday, September 7th.

09/02/2026

08/27/2026

The MC Series pressure and flow control valves feature a superior design for unequaled throttling and accuracy. Unique sealing and fluid flow dynamics permit compliance with current environmental (FTE) requirements.​

Call your local Taylor Valve Distributor or contact us at [email protected] for more information. ​

08/20/2026

The Model CM is an angle valve that holds a bubble-tight, closed position until pressure reaches an exact set point. At set point, the valve instantly opens to relieve pressure from a protected system. A popular specialty valve in the pulp and paper industry.​

~Set Pressure: 5 – 2,000 Psi​
~Accuracy: + / – 5%​
~Connections: Standard and custom available.​
~Seals: Available for high & low temperatures, Viton standard.​
~Standard Materials: Carbon steel body with stainless-steel trim,
other materials optional.​

Visit TaylorValve.com or send your inquiry to [email protected] today. ​

#

08/12/2026

The Model 3520 glass liquid level gauge is a rugged flat glass gauge. Standard construction includes a solid one-piece chamber, steel covers, alloy steel bolts and nuts, and tempered glass.​

Call your local Taylor Valve Distributor or contact us at [email protected] for more information. ​

# TaylorValve

08/06/2026

The Taylor 1600 Series Gauge Plug and Probe System™ has been a standard in the oil field since 1959. Taylor Gauge Plugs are found on wellheads, flow lines, and pressure vessels – where accurate pressures are required. They are also used in water purification systems, steel mills, and chemical and manufacturing plants throughout the world.​

Call your local Taylor Valve Distributor or contact us at [email protected] for more information. ​

07/23/2026

The Mallard Model 5602 is a reliable and economical spring-operated regulator used to supply air or gas to pilots, positioners or to pneumatic controls. ​

Specifications:​
Connections: 1/4”NPT​
Temperature Range: -20℉ to 180℉ (-29℃ to 82℃)​
Inlet Pressure Rating: 250psi​
Multiple Outlet-Pressure Ranges​

Features:​
Inlet Relief​
Dual Outlet​
Built-in 40 micron filter & dripwell​
Self-relieving​
Low droop at high flow​

Contact your stocking Mallard distributor or email us at [email protected] for more information. ​

07/17/2026

The Series 9300 Snap and Modulating Pilot Safety Valves utilize non-flowing pilots to provide highly reliable system overpressure protection. The 9300 is available with effective or***ce areas of 0.128 through 45.664 inches (D-T), valve inlet sizes 1-inch through 8-inch, and set pressures from 15 to 3,705 psig (1 to 260 barg). Continuous service temperatures from -50°F to +450°F.​​

Visit TaylorValve.com or send your inquiry to [email protected] today. ​​

07/09/2026

The Model A is an angle body valve that holds a bubble-tight, open position until flowing pressure puts an axial force on the pin. At set point, the pin buckles and the valve closes for a bubble-tight seal. In case of a downstream line break, the mass velocity impinging on the lower piston surface will force the pin to buckle and the valve will seal closed.​​

Call your local Taylor Valve Distributor or contact us at [email protected] for more information. ​​

07/02/2026

Taylor Valve offices will be closed Friday, July 3rd.