DeLoera Motorsport Fabrication

11/03/2026

10/18/2026

This clean mk4 Supra came to us a little while back for a couple of updated things.

A new intake manifold was installed so updating the cold side to fit the intake was a must. HD clamp was burned into the new throttle body and new piping was fitted up.

The fuse block also had to be slightly relocated to clear the new setup. A bracket was bent up to allow proper clearance for the TPS sensor while maintaining rigidity.

The oil dipstick needed a new bracket as well so we whipped up another bracket to keep the dipstick where it needs to be!

10/18/2026

This F body came to us to knock out a couple of things.

First up was a custom fan shroud for this Delta Pag 18 inch fan, made out of .090 aluminum and built in mounting points for the controller and relay panel.

New cold side was also next on the list. Got rid of some non bead rolled piping that can be prone to popping off under boost as well as giving the piping a more aesthetic look. Couplers in the piping was also reduced.

Last on the list was giving the intercooler and radiator some better air flow. An aluminum air dam was built to help prioritize the air to where it needs to be.

That’s it on this one, back onto another f body we currently have under the knife!

09/28/2026

This 99 Silverado is about to get a drop kit installed and required a c notch to pair with it.

Trick’d Toys makes a great quality c-notch with press-broken edges and a profile that matches the contour of the frame.

Layed down some MIG welds and fresh paint and she’s ready to roll!

09/27/2026

G body Sunday!

We had the privilege of working on our buddy Tyler’s Regal again. This time it came in for a 25.5 Chromoly Cage, Frame Bracing, Merillat Upper and Lower Torque Boxes, Mini Tubs, New Floor pan and a number of other tasks we performed.

Big thanks to Tyler for his patience while we completed this project for him and are looking forward to see this thing hit the drag strip!

07/10/2026

Side Exit Friday!

This clean LT 4 Door came to us for a little bit of exhaust magic. Utilizing Ace Race Parts 3 inch 304 stainless material and v bands for clean welds and easy serviceability. The Bed was cut and trim ring was riveted in for a clean look!

Hit us up for any custom exhaust needs!

07/07/2026

We whipped up this quick 4 inch intake for a natural aspirated Silverado.

Made out of 4 inch aluminum material, ls3 style MAF fl**ge, and some good quality clamps and couplers!

If you need one for any vehicle don’t hesitate to hit us up!

06/13/2026

NEW PRODUCT ALERT!!

If you have a 15-23 Dodge challenger and need a clean way to mount your parachute handle this is for you!

CNC cut 1/8 steel available in Flat black, gloss black or bare steel. Utilizes the two inner seat mount bolts and the Motion Raceworks Billet Parachute Release Kit. (Sold Separately)

Pricing starts at $175 for bare steel and $200 for the two black options.

Give us a shout if interested!
Our website will also be available here in the near future.

06/04/2026

A little while back we built this 4 inch downpipe for this Turbo Silverado.

Utilizing Ace Race Parts 304 stainless tubing and Monkey Fab inner locking V band for a nice snug fit against the turbine housing.

Don’t forget to hit us up for your Automotive fab needs!