Bertolino Industries

Bertolino Industries Bertolino Industries buys, sells and brokers ALL excess commercial and industrial equipment and inve

For Sale: 2017 ZOLLER Smile 420/6 High-Precision CNC Tool Presetter (Type SMILE420X-00265) w/ Software & ManualDescripti...
08/29/2026

For Sale: 2017 ZOLLER Smile 420/6 High-Precision CNC Tool Presetter (Type SMILE420X-00265) w/ Software & Manual

Description:
2017 ZOLLER Smile 420/6 High-Precision CNC Tool Presetter (SMILE420X-00265) w/ Disks & Manual

Description:
Up for auction is a 2017 ZOLLER Smile 420/6 High-Precision Tool Presetting and Measuring Machine (Type/SN: SMILE420X-00265), manufactured in Germany by E. Zoller GmbH & Co. KG. Sourced directly from an active laboratory environment following a facility remodel and full equipment upgrade.

Item Condition & Technical Notes:

· Source: Direct laboratory surplus.

· Power Status: Unit powers on cleanly. Set for 100–127V operation.

· Pneumatics: Requires 6–8 bar (80–110 PSI). We were unable to connect compressed air at our facility, so pneumatic functions remain untested. Sold as-is regarding compressed air features.

· Software & Documentation: Installed ZOLLER software system; includes original software backup/installation disks and operational manual.

This item is Sold As-Is, Where-Is, No Warranties, No Refunds, No Returns, and No Exchanges. All Sales Are Final. Please ask questions before purchasing.

Specifications & System Details:
· Manufacturer: E. Zoller GmbH & Co. KG (Made in Germany)
· Model / Series: Smile Series (Smile 420/6)
· Type / Serial No.: SMILE420X-00265
· Year of Construction: 2017
· Voltage: Dual Voltage (100–127V / 200–240V ~) — Currently set for 100–127V
· Frequency / Power: 50 / 60 Hz | 600 VA
· Pneumatic Specs: 6–8 bar / 80–110 PSI
· Software: ZOLLER Measuring Control System (Security Service Ver. 2.0)
· Included Extras: Software installation/backup disks and printed manual

Physical Dimensions & Freight Specs:
· Overall Footprint: 51.2" L × 24.6" W × 63.0" H (1,300 mm × 625 mm × 1,600 mm)
· Machine Weight: 474 lbs (215 kg)

· Shipping Weight: ~720 lbs plus (freight pallet required)

Your cost: $15,000.00

Item ID 082826-1, , /6presetter, , , , -00265, , , , , , .ZollerGmbH&Co.KG (Made in Germany), , , ,

For Sale: Commercial FryerBrand: Black Diamond (Admiral Craft)Model Line: Floor Model Tube-Fired Gas Fryer (typically BD...
08/17/2026

For Sale: Commercial Fryer

Brand: Black Diamond (Admiral Craft)

Model Line: Floor Model Tube-Fired Gas Fryer (typically BDGF-120 series with a 45–50 lb capacity / 120,000 BTU, featuring 3 burner tubes as seen in photo 3).
For this sale, you will receive one Fryer. We have 5 available.
Item Description

Type: Commercial Floor-Standing Double-Basket Gas Fryer

Condition: Lightly used (only 6 months of operation), excellent working order with clean stainless steel fronts and minimal standard wear.

Key Features:
Heavy-duty 16-gauge welded stainless steel tank
45–50 lb oil capacity
High-output tube burners (120,000 BTU) providing fast heat recovery
Thermostatic controls (200°F to 400°F temperature range)
Automatic safety shut-off (activates if temperatures exceed 450°F)
Includes 2 nickel-plated mesh fry baskets, a tube rack, and a drain extension per unit

Quantity Available: 5 units

Your cost: $675 each , , , , , , , ,

For Sale: Commercial Stacking Chairs – 2 Styles Available – Only $20 Each!Description:Up for sale are high-quality, comm...
08/06/2026

For Sale: Commercial Stacking Chairs – 2 Styles Available – Only $20 Each!

Description:

Up for sale are high-quality, commercial-grade cushioned stacking chairs—ideal for churches, conference centers, event venues, banquet halls, classrooms, or meeting spaces.

Designed for heavy-duty use, comfort, and compact storage.

Details & Features:

Price: $20 per chair

Styles Available:

Style 1 (Crown Top): Deep red velvet upholstery with elegant gold/bronze metallic frames and crown-top backrests (~80 available).

Style 2 (Round Back): Burgundy patterned fabric with smooth oval/round backrests and classic gold-tone frames (~80 available).

Key Benefits: Thick padded seats and backrests for long-lasting comfort; fully stackable for fast setup, teardown, and space-saving storage.

Condition: Good pre-owned commercial condition, clean and ready to deploy. , , , , , , ,

For Sale: 60" Sentry Air Systems Horizontal Laminar Air Flow Hood w/ Adjustable Stainless Steel Table & UV LightYour cos...
07/21/2026

For Sale: 60" Sentry Air Systems Horizontal Laminar Air Flow Hood w/ Adjustable Stainless Steel Table & UV Light

Your cost: $1,150.00

Short Description:
Up for auction is a complete 60-inch Sentry Air Systems (SAS) Horizontal Laminar Air Flow Hood and Clean Room Enclosure, complete with a heavy-duty adjustable-height stainless steel rolling table. Engineered to deliver continuous ISO Class 5 laminar air flow across the work surface, this setup provides a sterile, particulate-free environment—ideal for laboratory testing, pharmaceutical compounding, electronics assembly, tissue culture, or mycology applications.

Key Features & Specifications:
· Manufacturer: Sentry Air Systems, Inc. (SAS)
· System Type: Horizontal Laminar Air Flow Clean Bench / Containment Hood
· Hood Dimensions: Approx. 60" L x 24" W x 40" H
· Construction: High-density, chemical-resistant Polypropylene shell with clear tilt-up sash
· Filtration System: Top-mounted blower and dual-stage air filtration module (includes pre-filter housing and main HEPA/ULPA laminar flow filter)
· Decontamination: Integrated UVC Light system with clear warning safety labels
· Controls: Convenient side-mounted control panel featuring variable fan speed dial and lighting switches
· Workstation Table: Included heavy-duty adjustable stainless steel workbench with telescoping legs for customized ergonomic height, lower support framing, and heavy-duty locking swivel casters for easy mobility

Condition Details:
· Cosmetic: Pre-owned in good overall condition. Solid polypropylene cabinet and clean stainless steel frame with minor routine laboratory wear (SEE PHOTOS)
· Filter Status: Internal pre-filter in place (marked replaced 02/18/2024). Main laminar flow HEPA filter present; replacement filters are readily available directly from Sentry Air Systems.
· Testing: System powers on. Blower motor and control module operate properly.
· Decontamination/Safety Tag: Clean, non-hazardous, non-contaminated status verified.

Customer can do their own shipping if they want to. Just let us know.

Item ID 072126-1 , , , , , , , , ,

For Sale: Turbo Air MST-28-N M3 Series 28” Refrigerated Sandwich Prep Table – 7 Cu. Ft., (8) Pan Top (Used Only 6 Months...
07/20/2026

For Sale: Turbo Air MST-28-N M3 Series 28” Refrigerated Sandwich Prep Table – 7 Cu. Ft., (8) Pan Top (Used Only 6 Months!)

Your cost: $1075.00

Description
Up for auction is a premium Turbo Air MST-28-N M3 Series 28” Commercial Refrigerated Sandwich/Salad Prep Table. Recognized as an industry leader in reliability, this compact, high-efficiency unit was put into active service for only 6 months and is in excellent, like-new condition.

Featuring Turbo Air's patented Self-Cleaning Condenser System (which automatically brushes the coils daily to prevent dust buildup and extend compressor life), this unit keeps ingredient temperatures held precisely between 33°F and 39°F. It comes complete with a full-length cutting board, top condiment pan rail, and lower reach-in storage.

Key Features & Specifications
• Brand & Line: Turbo Air M3 Series
• Model Number: MST-28-N
• Capacity: 7.0 Cu. Ft. interior storage
• Top Pan Rail: Holds (8) 1/6-size, 4" deep condiment pans (included) with insulated top hood
• Cutting Board: Removable 9-1/2" deep x 1/2" thick high-density polyethylene prep board with side rail
• Refrigeration System: Self-contained, eco-friendly R290 Hydrocarbon refrigerant with digital controls
• Patented Self-Cleaning Condenser: Automatic daily coil cleaning system prevents dust buildup and reduces maintenance
• Construction: High-gauge stainless steel top, front, and sides with aluminum interior and stainless steel floor
• Door Setup: (1) Field-reversible solid swing door with self-closing design and interior LED lighting
• Electrical: 115V / 60 Hz / 1-Phase (Standard NEMA 5-15P plug)
• Certifications: cETLus Listed and ETL-Sanitation / NSF 7 Certified
Dimensions & Logistics
• Exterior Dimensions: 27.5" W x 30" D x 37" H (Height excludes casters / hood elevation)
• Net Weight: Approx. 185 lbs
• Mobility: Mounted on 4" swivel casters (front set locking) for easy positioning and floor cleaning

Item ID 072026-2 , , , , , ,

Flamaster FLM-G36-M 36” Commercial Gas Countertop Griddle – 90,000 BTU, 3 Burners (Mfg. Date: 05/20/2024 | Used Only 6 M...
07/20/2026

Flamaster FLM-G36-M 36” Commercial Gas Countertop Griddle – 90,000 BTU, 3 Burners (Mfg. Date: 05/20/2024 | Used Only 6 Months!)

Your Cost: $695.00

Description
Up for auction is a heavy-duty Flamaster FLM-G36-M 36” Commercial Countertop Gas Griddle in very good condition. Built for commercial kitchens, diners, food trucks, and catering setups, this high-performance cooking unit features a manufacture date of May 20, 2024, and was put into service for only 6 months.

Thoroughly cleaned, well-maintained, and fully operational, this unit features three high-output U-shaped burners providing independent temperature zone control across a spacious polished steel flat top.

Specifications & Asset Details
· Brand & Model: Flamaster FLM-G36-M

· Date of Manufacture: May 20, 2024 (05/20/24)

· Overall Width: 36 Inches

· Total Heating Output: 90,000 BTU total

· Burner Setup: (3) Heavy-duty stainless steel U-shaped burners (30,000 BTU each) with independent manual control valves

· Cooking Surface: Heavy-gauge polished steel griddle plate for fast recovery and even heat retention

· Gas Type: NG / LPG convertible (3/4" rear gas connection)

· Construction: Heavy-duty stainless steel front, side panels, and backsplash guard

· Cleanliness/Maintenance: Removable front-access stainless steel grease trough and drip drawer

· Compliance: CSA C/US Listed & Sanitation/NSF Compliant

Footprint & Logistics
· Exterior Dimensions: 36" W x 28.6" D x 15.2" H

· Approx. Weight: ~210 lbs Net / ~285 lbs Gross Shipping Weight

· Installation: Countertop design with 4" heavy-duty adjustable steel legs

NOTE: Sold sepearately, we have a griddle table for a 36" griddle.

Item ID Number 072026 , #36"gasgriddle, FlamasterGasGriddel, -G36-M, , ,

For Sale: Flamaster 36" Commercial Stainless Steel Gas Range (Stove) – 6 Burners, Standard Oven & Top SS Shelf – Excelle...
07/19/2026

For Sale: Flamaster 36" Commercial Stainless Steel Gas Range (Stove) – 6 Burners, Standard Oven & Top SS Shelf – Excellent Condition (Used Only 6 Months!) MFR. Date: 01/13/2025

Cost: $1,250.00

Description

Up for auction is a professional-grade Flamaster 36" Commercial Gas Range in exceptional, like-new condition. Perfect for restaurants, catering operations, food trucks, or high-volume commercial kitchens, this heavy-duty unit was put into service for only 6 months and has been meticulously maintained.

Featuring a durable stainless steel exterior, a full-sized standard oven, six powerful open burners, and an integrated top stainless steel shelf/backriser, this range is ready to pull right onto your cooking line and go to work.

Key Features & Specifications

Brand: Flamaster
Width: 36 inches
Burners: 6 heavy-duty cast-iron open burners with independent manual controls
Oven Base: Full-size standard commercial oven with matching wire racks
Construction: Premium stainless steel front, sides, oven handle, and high shelf
Storage/Utility: Includes a built-in top stainless steel shelf for plating, staging, or spice storage
Condition: Excellent shape, clean oven interior, fully functional, and lightly used
Bidding & Logistics Information

Condition Notes: Fully inspected and cleaned. Light cosmetic wear consistent with 6 months of standard kitchen use. Please refer to photos for exact visual condition. There is a small dent on the bottom side of unit. It happened during moving. When set up, you will not notice it. If is small.

Removal/Loading: Buyer is responsible for proper teardown, lifting, and transport. Please bring appropriate tools, a pallet jack/dolly, and a liftgate vehicle.
Don't miss out on adding a high-performance, lightly used commercial range to your kitchen lineup at a fraction of the cost of buying new!

Based on standard manufacturing specifications for a Flamaster 36" commercial gas range equipped with a full-size oven and the high-back stainless steel shelf/backriser, here are the official shipping weights and dimensions:

Dimensions
· Width: 36 inches

· Depth: 31.4 to 34.5 inches (depending on the inclusion of the front rail/oven handle overhang)

· Height: 60 inches (from the floor legs to the top of the stainless steel high shelf) , , #6-burnergasrange, #6-burnergasstover, , ,

For Sale: This is a complete Dell ReadyRails 1U Sliding Rack Mount Rail Kit (Rail Type A1), manufactured by Qualslide®. ...
07/19/2026

For Sale:
This is a complete Dell ReadyRails 1U Sliding Rack Mount Rail Kit (Rail Type A1), manufactured by Qualslide®.

In this lot you are bidding on 6 pairs of rails. If you want more or less, please let us know and we can list more.

$150 for the lot of 6 pairs.

These are professional-grade, 3-section sliding rails designed to allow your server to smoothly extend completely out of the rack for easy maintenance without unmounting. We have 18 complete pairs (Left and Right) available in stock, perfectly sorted and ready to ship.

• How it Works: It is a 3-section sliding rail kit designed for toolless installation into standard 4-post square-hole server racks. It allows a 1U server to slide completely out of the rack enclosure for servicing without being unmounted.
• Component Part Numbers Pictured: * DP/N R137J / 0R137J: The main 1U outer chassis rail assembly.
o DP/N R163J & R162J: The specific right and left inner slide members that mount directly to the side of the server.
o DP/N P261J & N921J: Intermediate slide structure component part numbers.
• Exact System Compatibility: Engineered specifically for the Dell PowerEdge R610 1U rack server. It will not properly fit other generations (like the R620 or R630) because Dell changes the chassis mounting pin configurations between generations.
• Dell ReadyRails 1U Sliding Rack Mount Rail Kit Type A1 R137J R163J R162J – Pairs
• Dell PowerEdge R610 1U Server Rail Kit ReadyRails Type A1 R137J N944J – 1, 5, or 10 Pack
Component Part Numbers & Technical Specs:
Because Dell uses modular engineering, multiple individual stamp numbers make up this complete kit assembly. You will find these exact markings on your units:
• Outer Rail Kit DP/N: R137J / 0R137J
• Inner Rail Component Stamped P/Ns: R163J (Right), R162J (Left), N944J, N921J
• Rail Type: A1 (1U Form Factor)
• Mounting Style: Toolless installation for standard square-hole 4-post server racks. No additional hardware or tools required to secure them into the rack cabinet.
Condition
• Surplus / Excellent Working Condition: Hardware mechanisms slide smoothly, and the spring-loaded quick-release rail latches lock properly. May show minor scuffs, cosmetic surface wear, or dust from a warehouse environment, but they are fully functional as intended.
1. Dimensions (Closed vs. Completely Open)
• Closed Length (Minimum Depth): 28.1 inches (714 mm)
o This is the profile depth of the rail itself when fully retracted inside a cabinet. The rails are adjustable to fit standard 4-post server racks with a front-to-back post-span depth ranging between 24.8 inches to 34.1 inches (631 mm to 868 mm).
• Completely Open Length (Full Extension): Approximately 54.5 inches (1,384 mm)
o Because these are a 3-section full-extension sliding design, the middle and inner segments slide all the way out, effectively doubling the length of the rail. This provides complete clearance so the server can be entirely serviced outside the rack footprint.
2. Maximum Weight Capacity
• Load Rating: Up to 100 kg (220 lbs)
o Enterprise 1U sliding rails are heavily engineered out of structural steel to withstand maximum vertical stress when a fully configured server (including heavy dual power supplies, internal drives, and full expansion cards) is fully extended and hanging out in mid-air.
3. Rail Mechanism Description (Dry Slide)
• Slide Mechanism: Friction-based "Dry Slide" (Non-Ball Bearing)
o Why it matters for buyers: Unlike consumer electronics drawers or older server rails that rely on greased, loose steel ball bearings that can gum up with dust or lose bearings over time, Dell designed these with precise, heavy-duty inner metal tracks engineered for high durability. They glide cleanly without grease, minimizing dust buildup in data center hot-aisles.
• Material & Construction: Heavy-gauge electro-galvanized stainless steel.
• Key Features Built-In:
o Toolless Release Latches: Features the iconic blue spring-loaded tabs on the front and rear mounting heads for instant snap-in locking to square-hole server cabinets.
o CMA Support: The rear rail ends feature integrated mounting pins specifically shaped to accept standard toolless Dell Cable Management Arms (CMA). , , , ,

God Bless America....
07/04/2026

God Bless America....

FREE Free FREE.68 pallets of n95 masks located in Simi Valley, CA 93065.This message has been going around all over the ...
05/09/2026

FREE Free FREE.
68 pallets of n95 masks located in Simi Valley, CA 93065.

This message has been going around all over the place. I am the owner of these masks and they are FREE.

We are not waiting for you to sell them to pick up. First come, first serve. No exceptions.

NOTE: Minimum of 1-truckload up to 3.
Contact Anthony at 818.912.3528

Address

18247 Parthenia Street , Ste. 5
Northridge, CA
91325

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

(818) 912-3528

Website

Alerts

Be the first to know and let us send you an email when Bertolino Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category