Ag and Industrial Engine Machine, INC.

04/12/2026

04/12/2026

Making sure a brand new Dart SHP block is decked to the correct height, taking it to 9.020” deck height.

04/10/2026

Good Luck In The Feature Jeremy Blake! Thank you for trusting us to power the #23!

03/31/2026

With Aaron on the mill and Mathew on the hone, the guys were able to get the cam tunnel straightened out and corrected on this aluminum 5.3 LS, with a set of block saver cam bearings, it is ready to be reassembled.

03/13/2026

Balancing a BIG Block Ford rotating assembly for a customer, thankfully this one was close to start with and needed no heavy metal, but we are well stocked if we come across one that needs it.

03/10/2026

Brand new out of the box head, “Ready to bolt on” I would like to say we see this out of 1 manufacturer, but we see it on a lot, even if it is brand new, having Ag & Industrial put a trusted resurface on it is cheap insurance.

02/27/2026

Update! Thank you everyone! We’ve got one located!

We are looking for a 5.7L Vortec 1 piece rear main block for a project, if anyone local to Norfolk, NE have one they would like to sell, please reach out to Mathew at 402-379-2230. Thank you.

02/22/2026

Our customer was needing a new head, but when the casting came in it had integral seats, and not a seat insert which he requested. Mathew did a seat insert, corrected 3 angle valve job to new Cummins recession height specs, a fresh resurface, then installed coated inconel exhaust valves, coated stainless intake valves, and performance valve springs to match the customers request. This is what we excel at, precision machine work done for the specific customer, not production for the masses. Should run great for a long time! If you have a custom project you need built, give Mathew a call at 402-379-2230.

02/15/2026

We were contacted about helping get a tune in on this 410 cubic inch SBF that is running E85 with a Predator carb. This was an interesting combination and ended up making just shy of 550 hp and 530 ft lbs of torque. Thanks Gregg for trusting with your build and the education on the Predator!

02/06/2026

Congratulations to Travis Bostock #26 & Team SMF and to Chris Williams #02 & Team WeCrashTV on advancing to the semi-finals of Wreckless Promotions Cornhusker Chaos. Thank you for trusting Ag & Industrial Engine Machine to machine, build, tune and dyno your engines. Travis is running a tried and true Chrysler LA 360, and Chris has a fresh SBC 383. Good luck tonight, and if anyone is interested in watching our engines in motion, follow the link to DerbyNationTV below.

https://derbytees.tv/videos/46124

If you are impressed and want to have us build you an engine spec’d for you, give us a call at 402-379-2230 and ask for Mathew Jones.

12/29/2025

De-Magnatizing a set of rods that we used the wet magnaflux to check for cracks. We first use the coil to magnetize the rod, then cover it in oil with mag powder in it, check with a black light. Finally, you can see the gauge move indicating the rod is magnetized, pull the rod from the coil to drag the magnetism out, then check to make sure it is neutral with the gauge. We can also do crankshafts, shafts, I even had a customer come in who was impressed by the machine, saying he used one that was about twice as long in the Air Force to check props during his service.