Double R Welding Services, LLC

Double R Welding Services, LLC High quality mobile welding at a fair price. Fabrication and repair services are available.

The ole drill lathe strikes again. Spent 30 minutes “turning” a bolt head down to make a press to get these bushings out...
04/03/2026

The ole drill lathe strikes again. Spent 30 minutes “turning” a bolt head down to make a press to get these bushings out. The ID of the housing is .498 and I got this bolt head diameter to .488 and pretty dang concentric to give me 5 thou on both sides. Got both bushings pressed out and the bore is perfectly clean. Took roughly 6X longer than it would’ve taken on a lathe but it worked out! Hoping to find some bearings to press in to take the place of bushings to restore this machine to proper alignment.

03/31/2026

Boy what a crazy 12 months it’s been!! My wife and I had our daughter last July and things have been super busy (who’d have guessed 🤣). My apologies for not keeping up with this page since then. I’m still up and running and have done quite a few jobs since I posted last. Got a few jobs lined out in the near future and I look forward to sharing them here. Get with me for all of your equipment repair, fencing, and structural welding needs! Big thanks to everyone who continues to help this business grow. This next year will be the best one yet!!

-Ryan

I don’t always stand behind my work…sometimes I stand on it instead 😝 built a rack to haul a spreader off of a picture a...
04/08/2025

I don’t always stand behind my work…sometimes I stand on it instead 😝 built a rack to haul a spreader off of a picture and a few measurements. Quick and easy and a happy customer!!

Finally feeling good enough after the shoulder surgery to get back into the swing of things. Repaired another previous f...
03/30/2025

Finally feeling good enough after the shoulder surgery to get back into the swing of things. Repaired another previous fix that failed on a John Deere 553 front end loader. Hydraulic lift cylinder sheared its mount (again) while fighting the fires a few weeks ago. Pieced it back together and cut a fish plate around the pin bushing to reinforce it all.

Fought porosity all the way through but finally got some clean metal put in. Turned out great for a second field repair. JD wants $4500 for a replacement mast that has to be welded in. I guarantee my work and am 100% confident that this will outlast the rest of the loader. Give me a call for any equipment repairs needed!

Farmers and ranchers: 3 hour minimum is waived for you guys within a 20 mile radius of Noble, OK. I appreciate y’all!

08/09/2024

Just wanted to make a post to keep all of my clients in the loop. I had initially planned to be returning to work around the middle of this month. Due to some bumps in recovery and out of an abundance of caution, I will be pushing back an additional 6-8 weeks until my next appointment with the surgeon. I can't afford to damage the work that was done and be down even longer. Everyone that I have in the works now have been contacted and rescheduled (HUGE thank you to everyone for your understanding and willingness to work with the situation!!!).

With all this said, please don't hesitate to give me a call for your projects and I will get you worked into the schedule as I'm able to do so.

Thank you everyone, I appreciate all of you tremendously!

Surgery went well, if I remember correctly they didn’t find anything additional to repair. My neck, chest, and shoulder ...
06/14/2024

Surgery went well, if I remember correctly they didn’t find anything additional to repair. My neck, chest, and shoulder is all still completely numb from the nerve block. My throat hurts extremely bad from being intubated, I strongly recommend avoiding that situation if possible 🤣. I appreciate everyone’s thoughts and prayers, all is well and I start PT on Monday.

06/12/2024

I wanted to make a post here even though I have reached out to everyone that has inquired about getting some work done. I am having shoulder surgery tomorrow and am expecting to start taking work again around the middle of August.

I appreciate everyone who supports my business. I’ve done some growing each year and been able to expand my capabilities because of it. Thank you all and I hope to be back at it soon!

Good job here, replaced a boat tongue that was rotted and bent, and rebuilt the winch/roller tree. Take a look at the sw...
05/28/2024

Good job here, replaced a boat tongue that was rotted and bent, and rebuilt the winch/roller tree. Take a look at the sweet new bulldog hitch on the end! This trailer was blowing bearings from going down the road crooked, and it’s straight as an arrow now.

Give me a call for any trailer repairs you need. Bring it to me or I come to you.

04/13/2024

Dustin is the man!! Knocked out all the post holes, pulling the old, and removed a cedar tree from the fence line in under 2 hours. He is a phenomenal operator and does a great job. Contact him below for any work you need done, I promise he will take care of you!

First full day getting posts in the ground and we’re about done. Top rail and cable coming next week once this concrete ...
04/13/2024

First full day getting posts in the ground and we’re about done. Top rail and cable coming next week once this concrete sets. Coming along great!

Ever needed just a liiiiiittle more out of your stands and can’t quite get it? Weld two poles together in the field to g...
03/19/2024

Ever needed just a liiiiiittle more out of your stands and can’t quite get it? Weld two poles together in the field to get you by 👍🏻

Address

Noble, OK
73068

Website

Alerts

Be the first to know and let us send you an email when Double R Welding Services, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Double R Welding Services, LLC:

Shortcuts

Share

Category