The Young Industries, Inc.

The Young Industries, Inc. Manufacturer of Bulk Materials Handling Equipment with the Lowest Lifetime Cost. The Young Industries, Inc.

is a value-engineered based manufacturer of bulk materials handling equipment. Our goal is to supply bulk materials handling products, services, and replacement parts that are safe, trouble-free to install, simple to maintain, and easy to operate. We work at providing products and systems that have superior performance characteristics and provide savings based on having the lowest life cycle costs

. Our equipment is designed and built for 24 hours per day, seven days per week operation with un-attended service.

Carbon black. Graphite. Nickel and lithium-based powders. On paper, these look like ordinary fine powders. In a feeder, ...
09/10/2026

Carbon black. Graphite. Nickel and lithium-based powders. On paper, these look like ordinary fine powders. In a feeder, they behave nothing alike.

Free-flowing materials move predictably through a standard rotary valve. Cohesive battery powders bridge over the inlet, rathole through the center, or pack into the rotor pockets and stall discharge.

The fix comes down to keeping the material aerated as it moves through the valve, so it never gets the chance to pack. Read more about handling battery materials: https://www.younginds.com/industries/batteries

We're headed to The Battery Show in Detroit, October 12–15 in Booth #5003.Battery cathode and anode materials are some ...
09/08/2026

We're headed to The Battery Show in Detroit, October 12–15 in Booth #5003.

Battery cathode and anode materials are some of the most demanding powders in bulk handling: fine, cohesive, and expensive enough that feed accuracy matters down to the gram.

If you're specifying feeders for battery or advanced materials manufacturing, let's put time on the calendar before the show floor fills up: https://www.younginds.com/contact-us

Bulk density, particle size, flowability, temperature, moisture.Those are the material properties that determine the rig...
09/03/2026

Bulk density, particle size, flowability, temperature, moisture.

Those are the material properties that determine the right feeder or batching system, more than any general catalog spec. A complete Application Data Sheet gets our engineers to the right recommendation faster.

Start your Application Data Sheet: https://www.younginds.com/resources/application-data-sheets

Fine, cohesive powders like pigments, carbon black, and talc don't move well through standard feed equipment. Vibration,...
09/01/2026

Fine, cohesive powders like pigments, carbon black, and talc don't move well through standard feed equipment. Vibration, agitation, and worn hoppers are common failure points.

The Stinger® Screw Feeder pairs a variable-speed auger with TransFlow® fluidization media to keep these powders moving on a controlled, metered path, built for batch, continuous, or volumetric feed control at low-to-medium rates.

See the Stinger® Screw Feeder: https://www.younginds.com/equipment/detail/stinger-products/stinger-screw-feeder

Active ingredients, flocculants, and specialty chemical additives all demand precise, repeatable dosing.The PowderFlow® ...
08/25/2026

Active ingredients, flocculants, and specialty chemical additives all demand precise, repeatable dosing.

The PowderFlow® Butterfly Valve uses a TransFlow®-lined disc to fluidize and condition cohesive powders right at the point of discharge, so material releases smoothly instead of clumping, bridging, or dosing inconsistently.

See the PowderFlow® Butterfly Valve: https://www.younginds.com/equipment/detail/transflow-products/powderflow-butterfly-valve

Setting a target feed rate. Configuring dribble speed as the setpoint approaches. Tuning cutoff timing to hit weight tar...
08/20/2026

Setting a target feed rate.

Configuring dribble speed as the setpoint approaches.

Tuning cutoff timing to hit weight targets without overshoot.

That's the practical work of integrating a Stinger® Screw Feeder with a weigh-batching control system, and it's where a lot of batching accuracy gets won or lost.

Talk to our engineering team about your control architecture: https://www.younginds.com/services/engineering

Asymmetric swing gate. Symmetric swing gate. Tab/blade. Rotary vane. Rotary plug. Bucket.Six diverter valve styles, each...
08/18/2026

Asymmetric swing gate. Symmetric swing gate. Tab/blade. Rotary vane. Rotary plug. Bucket.

Six diverter valve styles, each built for a different routing scenario, pipe size, and material characteristic. The right one keeps material headed to its intended destination, with no cross-contamination and no product loss at the split point.

See the full diverter valve lineup: https://www.younginds.com/equipment/diverter-valves

Screw speed and auger design are what actually control metered discharge into a weigh hopper.A Stinger® Screw Feeder con...
08/11/2026

Screw speed and auger design are what actually control metered discharge into a weigh hopper.

A Stinger® Screw Feeder configured correctly for your material delivers the same feed rate batch after batch, including fine, cohesive, or sticky powders that don't move well through other feeders.

See the Stinger® Screw Feeder: https://www.younginds.com/equipment/detail/stinger-products/stinger-screw-feeder

Address

16 Painter Street
Muncy, PA
17756

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

(800) 546-3165

Website

Alerts

Be the first to know and let us send you an email when The Young Industries, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Young Industries, Inc.:

Shortcuts

Share