Phase Incorporated

Call Directions Website Contact the business

Phase Incorporated Phase Incorporated is a family owned and operated precision metal fabricator located in Mt Airy Maryland.

The company has been in business since 1971, serving both the commercial and military market

Old-school tools, same high standards.Before the CNC machines and digital readouts, this trade was built on calipers, in...
10/25/2026

Old-school tools, same high standards.

Before the CNC machines and digital readouts, this trade was built on calipers, indicators, and a machinist's eye for detail. That mindset still runs our shop today, and it's why customers trust us with precision machining where every thousandth counts.

We're a family-owned machine shop in Mt. Airy, serving Frederick and surrounding manufacturers with custom machining, metal fabrication, and finishing all under one roof. Our ISO 9001 certified Quality Management System means every part gets documented, traceable results, whether it's a single prototype or a repeat production run.

• CNC machining with tight, repeatable tolerances
• Industrial metal fabrication and welding in-house
• MIL SPEC finishing and AS9102 inspections

Planning year-end production? Send your drawings and material specs to [email protected] and we'll build a quote around your project.

This YCM NSV-106A vertical machining center is where a lot of our precision work takes shape.The enclosed setup keeps cu...
10/24/2026

This YCM NSV-106A vertical machining center is where a lot of our precision work takes shape.

The enclosed setup keeps cutting consistent with coolant control, multiple tools staged and ready, and a digital control panel that lets our machinists dial in every detail. It's a big part of how we deliver accurate CNC machining and custom machining for manufacturers around Westminster and the Frederick and Washington region.

Because everything happens under one roof, parts that come off this mill can move straight into metal fabrication, welding, and finishing without handoffs or delays. That single-source approach is what makes our machine shop a dependable contract manufacturing partner, and as a defense manufacturing supplier we back every job with an ISO 9001 certified Quality Management System and full traceability.

⚙️ CNC milling on parts up to 20 by 40 inches
⚙️ Industrial metal fabrication and finishing in-house
⚙️ First Article Inspections to AS9102 standards

Planning your next production run? Email your drawings and specs to [email protected] and we'll put together a quote tailored to your project.

The people behind the parts matter just as much as the machines.Our team is the reason customers keep coming back. Ten p...
10/20/2026

The people behind the parts matter just as much as the machines.

Our team is the reason customers keep coming back. Ten professionals who take pride in every job that crosses the floor, from the first drawing review to final inspection. When you work with our machine shop, you're not handing your project off to strangers. You're working with a tight-knit crew that treats your tolerances like their own.

As a family-owned shop serving manufacturers across the Westminster and greater Frederick area, we combine CNC machining, precision machining, and metal fabrication with the kind of accountability only an experienced team can deliver. Our contract manufacturing approach keeps everything under one roof, backed by an ISO 9001 certified Quality Management System and ITAR registration for defense manufacturing supplier work.

• Custom machining for prototypes and repeat production runs
• Welding, finishing, and inspection handled in-house
• One point of contact from start to delivery

Want a team like this on your next project? Send your drawings and specs to [email protected] and let's get started.

Speed and accuracy don't have to be a tradeoff, and this machine proves it.Our FANUC Robodrill is built for fast, precis...
10/20/2026

Speed and accuracy don't have to be a tradeoff, and this machine proves it.

Our FANUC Robodrill is built for fast, precise work. Quick tool changes, rigid fixturing, and a control system that holds tolerances part after part. It's a big reason our machine shop can turn around CNC machining jobs without cutting corners on quality.

Because everything happens under one roof, a part can go from custom machining into metal fabrication, welding, and finishing without leaving our floor. That means fewer vendors, fewer delays, and one accountable team from drawing review to delivery for manufacturers around Westminster and the greater Frederick and Washington region.

• Precision machining with repeatable, documented results
• Industrial metal fabrication and MIL SPEC finishing in-house
• Contract manufacturing backed by an ISO 9001 certified Quality Management System

Have a project that needs tight tolerances and dependable timelines? Send your drawings and specs to [email protected] and we'll put together a quote built around your requirements.

Strong metal fabrication starts well before the first weld.Cutting, punching, and bending prepare the components for wel...
10/17/2026

Strong metal fabrication starts well before the first weld.

Cutting, punching, and bending prepare the components for welding. Then our team brings them together in-house, with careful attention to the drawings and project requirements.

At Phase, welding is part of an integrated fabrication process supporting demanding industrial and defense applications. We combine metal fabrication and CNC machining under one roof, keeping communication and documentation connected from drawing review through final inspection.

Our ISO 9001 certified Quality Management System supports controlled processes and traceable documentation throughout the project.

• In-house welding and metal fabrication
• Bending capacity up to 110 tons
• CNC machining for custom components
• First Article Inspection documentation to AS9102 requirements

Have a fabrication project in mind? Reach out to our team to discuss your drawings and requirements.

From the air, you can see two things we're proud of: a busy shop floor and a roof full of solar panels doing quiet work ...
10/16/2026

From the air, you can see two things we're proud of: a busy shop floor and a roof full of solar panels doing quiet work overhead.

Those 240 panels help power the equipment that runs our CNC machining, precision machining, and metal fabrication every day. It's part of how we run this machine shop responsibly, right alongside strict waste recycling practices and an ISO 9001 certified Quality Management System that keeps every project documented and traceable.

Manufacturers around Westminster, Frederick, and the greater Washington area count on us for custom machining and contract manufacturing with one accountable process from drawing review to final inspection. As a defense manufacturing supplier with ITAR registration, we hold ourselves to standards that don't bend.

• CNC machining and industrial metal fabrication under one roof
• ISO 9001 certified Quality Management System, ITAR registered
• A facility partially powered by solar, built on 55 years of family ownership

Have a project coming up as the year winds down? Send your drawings and specs to [email protected] and we'll build a quote around your requirements.

A small bracket with a screw and spring assembly might look simple, but getting the details right is what keeps a larger...
10/14/2026

A small bracket with a screw and spring assembly might look simple, but getting the details right is what keeps a larger build running smoothly.

This is the kind of work we do every day at Phase Inc. As a precision machine shop with over 55 years of experience, we handle CNC machining, metal fabrication, welding, and finishing all under one roof, so components like these move through production without extra handoffs or delays. Tight tolerances and documented, repeatable results come standard with every job.

Customers across Frederick and the greater Washington area count on us as a contract manufacturing partner and ITAR registered defense manufacturing supplier, backed by an ISO 9001 certified Quality Management System. From custom machining on prototypes to full production runs, every part goes through the same disciplined process.

• Precision machining with First Article Inspection to AS9102 standards
• Industrial metal fabrication, bending, and finishing in-house
• One accountable team from drawing review to final delivery

If you're planning production before the year wraps up, send your drawings and specs to [email protected] and we'll put together a quote tailored to your project.

Tight workholding is where precision machining actually starts.Before a single cut is made, the setup decides whether a ...
10/08/2026

Tight workholding is where precision machining actually starts.

Before a single cut is made, the setup decides whether a part holds tolerance or drifts. That's why our CNC machining stations use serious workholding like Lang Makro-Grip vices, locking metal in place so every pass mills exactly where it should. It's the kind of detail that separates a good machine shop from a great one.

From CNC milling on parts up to 20 by 40 inches to manual turning, metal fabrication, welding, and finishing, our team handles custom machining and contract manufacturing under one roof in Mt. Airy. Manufacturers in Westminster and across the region count on us for documented, repeatable results through our ISO 9001 certified Quality Management System, with ITAR registration for defense manufacturing supplier work.

✔ Tight tolerances held from first article to production run
✔ Fewer vendors, fewer handoffs, less risk
✔ Over 55 years of family-owned experience

Heading into the busy end of the production year, now's the time to get your parts quoted. Send your drawings and specs to [email protected] and our team will get back to you with next steps.

Some parts start with a flat sheet and end up holding an entire assembly together.Our Wiedemann M2048 TS is where a lot ...
10/08/2026

Some parts start with a flat sheet and end up holding an entire assembly together.

Our Wiedemann M2048 TS is where a lot of that work begins, cutting clean, consistent features into steel up to .156 inches thick. From there, parts can move straight into bending, welding, and finishing without leaving our building. That kind of flow is what makes us a true one-stop machine shop for custom machining and metal fabrication, not just a stop along the way.

For more than 55 years, our family-owned team has supported manufacturers in Frederick, Westminster, and around Washington with precision machining and industrial metal fabrication backed by an ISO 9001 certified quality system. As an ITAR registered defense manufacturing supplier, we keep every step documented and traceable.

• CNC punching and bending up to 110 tons
• Contract manufacturing with in-house welding and finishing
• One accountable partner from drawings to delivery

Fall is when production schedules get tight, so don't wait on that next project. Send your drawings and specs to [email protected] and let's get it moving.

We would like to congratulate Natalie Davis on her last year in Howard County 4-H. Angus steer or not, we consider ourse...
08/18/2026

We would like to congratulate Natalie Davis on her last year in Howard County 4-H. Angus steer or not, we consider ourselves privileged to buy your last steer project during this years Howard County 4-H Livestock Sale. We wish you luck during your time at Kansas State University, and in all of your future endeavors!

Address

BACK ACRE Circle
Mount Airy, MD
21771

Telephone

+13018297940

Website

Alerts

Be the first to know and let us send you an email when Phase Incorporated posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Phase Incorporated:

Shortcuts

Share

Category