RWD Trim

RWD Trim Company founder Ken Rivest is a Certified Master Installer with over 20 year experience in the replacement industry.
(4)

This valuable experience lead him on a quest to develop new and necessary trim solutions to enhance the quality of replacing windows. RWD Trim manufactures and distributes vinyl window and door trims that are 100% MADE IN THE USA. Our exclusive patented profiles offer the Window replacement contractor a convenient and cost effective solution for finish trimming replacement windows.

03/20/2026

And the winner is......... Watch to find out 😎

With Thanksgiving approaching, we wanted to take a moment to thank you for your continued partnership and support. We ar...
11/18/2025

With Thanksgiving approaching, we wanted to take a moment to thank you for your continued partnership and support. We are grateful for the opportunity to serve you and your team throughout the year.

Our office and phone lines will be closed this Thursday and Friday (Thanksgiving Day and the following day).
This allows our team time to rest and enjoy the holiday with their families.

Online Ordering Remains Available 24/7
You can still place orders anytime at www.RWDtrim.com, and we will begin processing them as soon as we return on Monday.

We hope you and your loved ones have a safe, happy, and relaxing Thanksgiving holiday.

Thank you again for being part of the RWD family.

Warm regards,
The RWD Trim Team

Portable & Cost Effective Color Solutions Why use RWD product? Portable & Convenient Super Fast Delivery Easy Online Ordering Exceptional Customer Service Save On Waste ASTM & AAMA Tested Cost Effective Easy To Install Made In The USA Mission Statement At RWD our mission is to continually develop an...

We get a lot of questions about our adhesive, so we wanted to share some information about it. 1. We manufacture our own...
10/15/2025

We get a lot of questions about our adhesive, so we wanted to share some information about it.
1. We manufacture our own adhesive that is specific to RWD.
2. Our adhesive is chemically formulated to bond to the window when applied correctly and left to set up for 12 hours.
3. We use a slight layer of foam between the adhesive for two reasons: it allows for a small amount of expansion and contraction for better weather durability, and the foam adds a protective layer that ensures water does not get through.
4. Water WILL NOT permeate the adhesive when installed correctly.

Common installation errors we’ve seen include the following:
• Not using enough of the adhesive. The adhesive is 3/4” wide, and if you’re not using at least 1/2” of it, you’re simply not getting enough surface bite.
• Applying RWD to a dirty surface. You must clean the window using 100% denatured alcohol before applying the trim.
• Cutting the trim too long. It’s always good practice to cut the trim about 1/16” short to allow for expansion. Some installers cut the trim a little too long and try to force it into place. While that might work in the moment, it causes too much pressure and prevents the adhesive from bonding properly, which can cause it to pop off later.
• Not applying enough pressure. Once you stick the trim to the window, apply firm pressure with a roller or your hand across the entire strip. This ensures the chemical bonding process activates evenly across the adhesive and sets up properly.
• Installing in cold conditions. If it’s cold outside, bring the trim indoors to acclimate before applying it to the window. If you’re installing outdoors on a very cold day, use a heat gun to gently warm the window surface before application.

Lastly, if you notice a little bit of “memory” in the trim, it’s always good to slightly back-bend the ends before installation. If applied correctly, you shouldn’t have any issues—but it never hurts to back-bend just a little to remove coil memory.

If you have any questions or concerns, please reach out. We’d love to hear from you!
[email protected]

Get your orders in early this week as we will be closed this Friday and next Monday for Labor Day.  www.RWDtrim.com/shop
08/25/2025

Get your orders in early this week as we will be closed this Friday and next Monday for Labor Day. www.RWDtrim.com/shop

08/08/2025

Who will win today?! 2 Chances to win.

ROUND 3: FREE TRIM FRIDAYLast round's winner was Marilyn Cunningham Pence Bros. –– Congrats!And this week...we're spinni...
08/07/2025

ROUND 3: FREE TRIM FRIDAY
Last round's winner was Marilyn Cunningham Pence Bros. –– Congrats!
And this week...we're spinning the wheel TWICE for a box of free trim!
Sign up for tomorrow's drawing by clicking here: https://ctrk.klclick.com/l/01K230VNG2D50TFBP0QHVQRXCY_0

Why use RWD Trim? 1,000+ Installers Nationwide Trust RWD.
08/05/2025

Why use RWD Trim? 1,000+ Installers Nationwide Trust RWD.

07/25/2025

Week #2 of Free Trim Friday! Watch to see if you won!

07/18/2025

FREE TRIM FRIDAY - and the winner is.....

🚨 Heads up! We’re closed this Thursday & Friday (July 3–4) for the 4th of July holiday 🇺🇸If you’ve got something you nee...
06/30/2025

🚨 Heads up! We’re closed this Thursday & Friday (July 3–4) for the 4th of July holiday 🇺🇸
If you’ve got something you need from us—today’s the day to get it done.
Let’s take care of business before the burgers hit the grill 🍔🔥

Address

Monticello, FL

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 3pm

Alerts

Be the first to know and let us send you an email when RWD Trim posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share