Aquajet North America

Call Directions Website

Aquajet North America North American distributor of cutting-edge Hydrodemolition equipment for concrete repair and industrial cleaning.

Explore the sustainable way to protect and preserve concrete constructions. Aquajet is known as the industry leader in Hydrodemolition equipment, including robots, attachments, high-pressure pumps and water treatment systems. Though we’ve seen great growth over the years, our priorities remain the same: keeping our customers on the cutting edge by consistently bringing you the most advanced technology and versatile products in the industry.

What makes a complete hydrodemolition system?— A robot to rapidly remove concrete— A high-pressure pump to provide relia...
10/19/2026

What makes a complete hydrodemolition system?

— A robot to rapidly remove concrete
— A high-pressure pump to provide reliable power
— A water treatment system to seamlessly handle wastewater

Together, these three work harmoniously to provide a highly productive hydrodemolition setup for a wide range of concrete removal projects.

Interested in learning more about hydrodemolition? Contact us through the link in the comments.

Misconception: Hydrodemolition requires too much water.Reality: The right equipment can help you use and manage water mo...
10/14/2026

Misconception: Hydrodemolition requires too much water.

Reality: The right equipment can help you use and manage water more efficiently.

To conserve water, you can slow down the pump and instantaneously reduce the amount of water needed. And our EcoClear water treatment systems allow you to recycle and recirculate wastewater for continued use, significantly reducing the amount of water needed for the project.

When Frank Capasso & Sons was tasked with repairing a historic parking garage in New Haven, Connecticut, they turned to ...
10/08/2026

When Frank Capasso & Sons was tasked with repairing a historic parking garage in New Haven, Connecticut, they turned to hydrodemolition.

The crew used the Aquajet Ergo to remove 40,000-plus square feet of thick concrete floor slab. Hydrodemolition allowed the crew to perform the work in a less-disruptive way to the surrounding neighborhood in relation to dust and noise control.

Once set up, a crew of two removed 180 to 220 square feet at a depth of 3 to 3.5 inches each day. They were allotted one year for the job but finished the project in just over 10 months.

Great work, Frank Capasso & Sons, Inc!

What should you look for in a high-pressure pump for hydrodemolition work?✔️ Powerful performance✔️ Quiet operation✔️ En...
09/22/2026

What should you look for in a high-pressure pump for hydrodemolition work?

✔️ Powerful performance
✔️ Quiet operation
✔️ Energy efficiency
✔️ A compact footprint

Our Ecosilence checks all those boxes. Explore its features through the link in the comments.

Show us where you're putting Aquajet to work! Whether it’s a dam, a bridge, a tunnel or anywhere else needing concrete r...
09/15/2026

Show us where you're putting Aquajet to work! Whether it’s a dam, a bridge, a tunnel or anywhere else needing concrete removed, we love seeing our customers’ jobsite photos.

What summer projects did you use Aquajet equipment for? Drop a photo in the comments or send us a message of your !

When you’re faced with a multiyear, multimillion dollar concrete renovation project, consider hydrodemolition.That’s wha...
09/08/2026

When you’re faced with a multiyear, multimillion dollar concrete renovation project, consider hydrodemolition.

That’s what Conterra Restoration did for a parking garage job in Toronto. Hydrodemolition provided them an efficient, ecofriendly solution, removing about 200,000 square feet (18,580 square meters). The crew used our EcoClear water treatment system to treat about 10 million gallons (37.9 million liters) of water.

During an eight-hour shift, the crew removed 600 to 1,000 square feet (55.7 to 92.9 square meters) of concrete. Had they opted for manual removal, they estimated it would take a crew of 20 to achieve the same productivity for removal only.

Great job by the Conterra Restoration Ltd. crew! If you’re interested in using hydrodemolition for concrete renovation work like this, reach out to us through the link in the comments!

Why choose hydrodemolition?Concrete removal is about more than getting material out. It's about creating the right foun...
09/02/2026

Why choose hydrodemolition?

Concrete removal is about more than getting material out. It's about creating the right foundation for a quality, long-lasting repair.

Unlike traditional methods, hydrodemolition removes deteriorated concrete without damaging the surrounding substrate. That means a cleaner surface, preserved structural integrity and a better foundation for the repair.

The result? Satisfied asset owners with repairs built to last.

A common question we hear is, “When should hydrodemolition be used?”Hydrodemolition should be used when concrete needs t...
08/25/2026

A common question we hear is, “When should hydrodemolition be used?”

Hydrodemolition should be used when concrete needs to be removed while preserving the surrounding structure. This includes removing damaged or deteriorated material, as well as fixing incorrectly placed concrete or modifying existing structures.

Hydrodemolition is especially effective where structural integrity, bond strength and long-term durability are crucial, such as tunnels, bridges and other infrastructure.

To learn the answers to more FAQs, visit the link in the comments.

The challenge: Remove about 22,000 square feet of fire-damaged concrete at a depth of 2.5 inches on the underside of a f...
08/20/2026

The challenge: Remove about 22,000 square feet of fire-damaged concrete at a depth of 2.5 inches on the underside of a fire-damaged bridge in Los Angeles.

The equipment: Aqua Cutter 750V, two high-pressure pumps.

The results: 100 square feet of concrete removed per hour, keeping rebar intact and providing a superior bonding surface to replace the old concrete.

How did they do it? Extreme Pressure Systems, Inc. used the Aqua Cutter's tower to reach 21 feet to the bridge underside. Dealing with challenging angles, the crew used the 750V's shape function to cut in a polygon shape, rather than relying on manual removal.

Great job to the Extreme Pressure Systems crew!

Misconception: It’s too difficult to learn hydrodemolition equipment.Reality: While there certainly is a learning curve,...
08/11/2026

Misconception: It’s too difficult to learn hydrodemolition equipment.

Reality: While there certainly is a learning curve, today’s equipment designs make it seamless and repeatable.

• User-friendly interfaces
• Preset parameters
• Accessible training materials

You can quickly turn the challenge of learning new equipment into an opportunity for growth and business development.

Address

17321 TYE Street SE, Suite B
Monroe, WA
98272

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Telephone

+18006217856

Website

,

Alerts

Be the first to know and let us send you an email when Aquajet North America posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category