Cline Welding LLC

04/09/2026

A truck drivers cover tarp tube broke in two pieces and the yoke. We fixed the crack as best as possible and sleeved the tube and made a new yoke ear. And got him back on the road quickly

04/09/2026

A farmer brought in his rogator sprayer with several wear and tear cracks. We grinded out welded and plated them where we could.

04/09/2026

Factory weld broke on axle tube causing the spindle and plate to bend. Cut off and remove 2 plates and weld the new spindle plate on and re-weld top plate.

04/09/2026

A customer called wanting his sprayer boom tips repaired that were previously welded by a “professional” before he bought the sprayer. We took on the job expecting the worse from the pictures he sent over. Needless to say the customer was on time crunch and ended up buying new boom tips. We helped remove the old ones and install the new ones. ( also fixed a crack on the main frame of the sprayer) Eventually we will rebuild the old ones for him to have as a back up. Next time someone says they can do it for cheaper just remember this and hire a true professional to do it right.

04/09/2026

Fabricated welded and installed these light poles with hand rails for 2 different rental duplexes.

03/10/2026

This carriage bolt hole was ripped and torn out we cut out 3” circle around it and welded in a new patch.

02/27/2026

Designed, cut out, and welded in patch for the swing arm on this John Deere combine. GTAW welded due to the thickness of the plate. Grinded flush front and back and re welded support bracket we had to remove for access.

02/18/2026

Broken obsolete part on an off road dump truck needed fix and we fixed it up right! Weld Credit goes to Grayson Blake

02/14/2026

02/13/2026

We are now D1.1 certified in all positions up to 3/4”