Lowboy Motorsports

Lowboy Motorsports Us being buddies doesnt change my overhead.
(2)

Happy Saturday! Boots on the ground for  81 C10.. Management mount, brake lines, plumb / wire the  3H and everything els...
05/30/2026

Happy Saturday!

Boots on the ground for 81 C10..
Management mount, brake lines, plumb / wire the 3H and everything else on the docket..

Covered in suspension front and rear
bags front and rear and 14/13 brake kit from aswell as a fuel cell itching to get into it’s home…



All done with our part in Scott’s regular cab C30 as it’s off to paint / body from here.Sitting on our 22” Pete oval cla...
05/26/2026

All done with our part in Scott’s regular cab C30 as it’s off to paint / body from here.

Sitting on our 22” Pete oval classics wrapped around 265/40/ rubber, Our in house front suspension powder coated hugger orange to match the 16” brakes from little shop.
Out back, our non gooseneck rear 4 link / watts suspension colored to match, our front and rear sheet metal, plumbed air system and all new brake lines and welded in the vintage air firewall plate..






—— —— ——

-
-
-

Scott’s regular cab then & now…
05/26/2026

Scott’s regular cab then & now…




Happy Friday, team All done with our part in Ken’s 06 duramax chassis that he’ll “throw” a 57 GMC cab an flat bed on..  ...
05/23/2026

Happy Friday, team

All done with our part in Ken’s 06 duramax chassis that he’ll “throw” a 57 GMC cab an flat bed on..

set up on our in house front suspension, out back we ran an inside the rails 4 link / watts gooseneck setup, moved the axle back and new brake lines, all done in house.






 just about ready for its drive Moab.       —— —— ——
05/08/2026

just about ready for its drive Moab.





—— —— ——








04/23/2026

Robs 87 C30 back on the road with its new heart... whole lotta detail work remaining before showtime in moab...



Touchdown on Scott’s C30 ! Truck is setup on our front and rear suspension coated in hugger orange, our 22” Classic Pete...
04/21/2026

Touchdown on Scott’s C30 !

Truck is setup on our front and rear suspension coated in hugger orange, our 22” Classic Pete oval custom cut wheels wrapped around some 265/40 rubber

16” brakes and adapters front and rear coated in hugger orange
bags front and rear
e level +
- battery trays
- always having parts in stock! Bags fittings and everything in between!!

Wheel polishing, Plumb wire and some sheet metal work and this flintstones powered c30 can go get a heart…




22” square custom cut tuck wheel setup wrapped around 265/40/22 rubber..
04/21/2026

22” square custom cut tuck wheel setup wrapped around 265/40/22 rubber..




All done with   97 C3500 Set up on our front and rear suspension (non gooseneck), 24” custom cut wheels, front and rear ...
03/16/2026

All done with 97 C3500

Set up on our front and rear suspension (non gooseneck), 24” custom cut wheels, front and rear sheet metal work, our hood strut kit, brake lines done in house as well as our abs delete / combo valve, repaired the hole in the bed over the fuel pump, narrowed rear end, access panel in the bed to allow for convenience when servicing your batteries, management etc. topped off with 16” brakes from little shop and alignment.

This one’s off to paint and we are onto the next one

Happy Monday team!

— Brands used —









Happy Friday team ! All done with Joes 56 ford, Truck initially came to us for some suspension needs, Set the front up o...
02/20/2026

Happy Friday team !

All done with Joes 56 ford,

Truck initially came to us for some suspension needs, Set the front up on an over the counter front coil over system, Applied our 4link concept and set the rear up on coilovers aswell topped off with a new .autowire body harness.

4th of July weekend putting together pops suburban project, we get a wonderful surprise that Joes truck caught on fire. Insurance looked to round everyone involved up, we were told to show face for Fire Forensic investigation with reps from the insurance company, the city and reps from Holley. Discovered the truck ended up a speed shop we shall not mention and that poorly executed Holley install was the cause of the fire. It caught on fire on the way home…...

At that point man we put our cape on and got to work

Pulled the existing motor / trans got the truck ready for paint and had the engine bay color matched, repainted the hood completely, set up the truck on most up to date ac system, gauges, new .autowire chassis harness topped off with a sniper EFI…

Big big shouts to

AND
Joey for paintwork @ Carney and Sons




Address

1045 W Broadway Road, Suite 4
Mesa, AZ
85210

Alerts

Be the first to know and let us send you an email when Lowboy Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lowboy Motorsports:

Share