Kirklin Performance & Fab

Kirklin Performance & Fab Custom performance upgrades & Tig or Mig welding
(1)

A new customer stopped by, disappointed with the quality of work a local shop had sent him out the door with. I pulled h...
04/28/2026

A new customer stopped by, disappointed with the quality of work a local shop had sent him out the door with. I pulled his bike in, got it done the same day, and gave him the quality he should have received in the first place. 🤘

It's never a bad day when we get to work on Lashark😈 Brought all the way BACK from Des Moines because they know the qua...
04/16/2026

It's never a bad day when we get to work on Lashark😈 Brought all the way BACK from Des Moines because they know the quality that they are going to leave with every time. Now THAT says something!

We had previously built them intercooler piping, and built the hood dump pipes. They recently purchased a brand new carbon fiber hood and hood latches- so we installed those, cut the hole for the exhaust, and made a new beauty ring! While we were at it, we designed and 3D Printed a coolant overflow tank bracket out of carbon fiber filament to drop the tank down a bit to clear the hood. You know where to come to get nothing but the best! 😎🤝

The real OG's will remember this car, we did the tube front end, and roll cage on this bad unit a couple years ago at th...
04/14/2026

The real OG's will remember this car, we did the tube front end, and roll cage on this bad unit a couple years ago at the old shop. It came in for some more fab work, and here is what we completed
✔️ Built new charge pipe from Intercooler to Intake to help reduce IAT as the old one was very close to the downpipe as shown.
✔️ Installed an over the axle Anti-Roll bar kit
✔️ Installed suspension travel limiters
✔️ Fabricated a spot for a screw in style tow hook

Customer dropped off some Peterbilt 397 headlight buckets to get shaved! A stop at Wild Rooster Polishing and Detailing ...
04/11/2026

Customer dropped off some Peterbilt 397 headlight buckets to get shaved! A stop at Wild Rooster Polishing and Detailing where he got them looking like a mirror and boy oh boy do they look darn good! 💪 Peep his beautiful rig 🔥👀


(We did not do the installation on these, just showing pictures of them installed)

This BEAUTIFUL low mile STI popped by for a new downpipe! The old one had been used on previous generation cars the owne...
04/04/2026

This BEAUTIFUL low mile STI popped by for a new downpipe! The old one had been used on previous generation cars the owner had, and was time to get replaced after having many cracks/holes from age. We purchased an aftermarket one, made some "slight modifications" to it 😉, and got it leak free ready to tear up the streets again!

This Thicc widebody mustang rolled in for some quick and simple stainless connection pipes after he swapped his headers....
04/03/2026

This Thicc widebody mustang rolled in for some quick and simple stainless connection pipes after he swapped his headers. Peep the before and after.. 👀 No job too big or small here! 🔥

This Cummins came to us cab-off from a good friend with a used compound turbo kit. We reworked what we could, redesigned...
03/31/2026

This Cummins came to us cab-off from a good friend with a used compound turbo kit. We reworked what we could, redesigned what we didn’t like, and built the rest from scratch.
Once it came back with the cab on, we finished up the last charge pipe and handled a full downpipe build/modification to tie everything together.
Now it’s back on the road, getting driven like it should.
✔️ Custom downpipe with V-Bands
✔️ Custom crossover pipe
✔️ Custom charge pipes/Turbo housing
✔️ Motion Raceworks HD clamp assembly
✔️ Stainless + aluminum from Stainless Bros

Careful what you pull up next to....👀

This Coyote F150 rolled in ready for some upgrades 🔥It already had a Borla ATAK exhaust, but the customer wanted to keep...
03/28/2026

This Coyote F150 rolled in ready for some upgrades 🔥
It already had a Borla ATAK exhaust, but the customer wanted to keep that same tone—just a little more attitude when you get on it.
I built something that stays deep and clean at idle, but really wakes up when you hit the gas.
Here’s what we knocked out:
✔️ Full true dual 3” stainless exhaust
— Stainless Bros resonators
— Kooks mufflers
— Vibrant Performance tips
— V-band connections throughout for a clean, serviceable setup
✔️ Took care of some maintenance while it was in:
— Ford Performance valve covers
— VCT solenoids
— Coil packs & plugs
—and a few other odds and ends
Simple, clean, and sounds exactly how it should! Peep the comments for the before and after 👀👂

This bad unit rolled through the shop to get some work done!✔️ Installed door swingouts to existing roll cage✔️ Mounted ...
03/21/2026

This bad unit rolled through the shop to get some work done!
✔️ Installed door swingouts to existing roll cage
✔️ Mounted an easily removable roll cage net (street car) 😉
✔️ Installed new bucket seats with new mounting locations
✔️ Mounted drag wing
We also tightened up some miscellaneous odds and ends while it was at the shop!

Address

495 62nd Street Suite #3
Marion, IA
52302

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Kirklin Performance & Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kirklin Performance & Fab:

Shortcuts

Share