12/04/2018
Airboat/Marine Engine E-85 Fuel built for sustained RPM full power operation. EXTREME DUTY Engine Kit or Build.
• Revised Oil System with 14qt capacity (Oil Cooled Pistons/Pins, Valvetrain)
• 2 Ignition Pickup Coils for redundant ignition capability.
Lower Compression, Detuned Camshaft yet still has 830hp capability in base trim. 900hp with Optional Brodix • 351 Oval, 930hp with Head Hunter Option and 1000hp with SR-20 Heads.
• Available in All Aluminum w/ optional Dart, Brodix or BME Aluminum Blocks.
• Also available as Tall Deck 540/555/565 in “boost” form with 8.8:1 compression and parts upgrades to handle 2000+hp for as little as $1050
• Dart heads are available teflon coated, Brodix heads are available hard anodized (+$815)
***** Block & Rotating Assembly $6,616 *****
• Dart Sportsman, 4.600 Bore, 10.2” Deck
• Dart Small Parts Kit
• JE 4.600 x 1.120, 10.3:1 with 118cc, 1/16, 1/16, 3/16
• Full Round 2618 Forged, 10.9:1 with 110cc
• JE Plasma Moly Ring Set, File Fit
• Callies 4.750” Magnum, Internally Balanced
• Manley 6.700” Pro Series I Beam, ARP 2000 Bolts
• King Alecular Rod & Main Bearings, Extra Clearance
***** Camshaft & Valvetrain $1,239 *****
• Custom Bullet Endurance Camshaft
• Double Tru Roller, Steel Billet Geared Roller Thrust
• Timing Chain
• CompCams High Pressure Oiled Mechanical Roller Lifters
• GM Chrome Timing Cover
***** Oil System $1,380 *****
• Moroso Oil Pan, 10” Deep 12qt, Aluminum Fabricated, Baffled, Billet rail Pan
• Moroso oil Pump & Driveshaft, Extended Pickup Billet
• Hard Anodized Aluminum
(reversed steel pans also available)
***** Heads & Top End $4294 *****
• Dart Pro1 2.30/1.88 Valves
• 399/284 cfm @ .700 Lift, Mechanical Roller Assemblies
• Edelbrock Victor Intake Manifold
• ARP Head Studs
• Cometic MLS Head Gaskets
• Trend ⅜ Pushrods
• Crane Gold Rocker Arms
• Dart Stud Girdle
***** Finishout Parts $2640 *****
• Tall Polished Aluminum Valve Cover
• ATI Balancer (Internally Balanced)
• MSD Race Distributor
• MSD Crank Trigger
• MSD 8.5mm Wire Kit
• QuickFuel 2 Circuit 1150 Dominator (E-85)
• Hardware, Distributor Clamp, Balancer Bolt, Oil Filter Adapter, Oil Filter, Spark plugs, Break In Oil, Oil Pan Gaskets, Intake Gasket, Timing Cover Gasket, Rear Main Seal, Valve Cover Gaskets
***** Labor $2,465 *****
• Hone Block with Torque Plates & Valley Lugs
• Zero Deck Block
• Balance Crankshaft
• Polish Crankshaft
• File Pins, Pistons & Rods
• Disassemble Heads, Clean, Lap & Set Spring Heights
• Final Wash All Parts
• Professionally Assemble
• Dyno Break-in, Test, Tune
Total Parts $16,169
Total Labor $2,465
Total Parts & Labor $18,634
***** Additional Options *****
• BMP Aluminum Block +$2,500
• Jesel Camshaft Drive +$875
• Jesel Shaft Rocker System +$1,171
• Brodix Head Hunter (Requires Piston & Intake and rocker changes) +$2395
• Brodix SR-20 (Requires Intake , Piston, rocker and valve cover Upgrades) +$4500
• Brodix 351/ 365 Oval port (Requires Intake change)+$1725
Raymac Racing Engines
Raymac Power
RaymacRacingEngines.com
RaymacPower.com
940.594.0350 Office/Text (Mansfield, Texas)
817.705.5424 Shop/Dyno (Ft. Worth, Texas)
