Drexel Metals Inc

05/29/2026

FRSA's Florida Roofing & Sheet Metal Expo is just around the corner!

Before the doors open, we’re getting everything ready to meet builders, fabricators, and partners who are shaping what’s next in roofing.

If you’re heading to Kissimmee, FL, make 𝗯𝗼𝗼𝘁𝗵 𝟵𝟬𝟱 part of your showfloor route. We’ll be there talking through real-world applications – from coil and flat sheet solutions to metal profile systems designed for speed, durability, and design flexibility on the jobsite.

We'll see you there! 👉 https://www.floridaroof.com/frsa-expo

05/28/2026

Let’s face it: some things are out of our control – but roof noise doesn’t have to be one of them.

That occasional popping or ticking you hear in metal roofing? It’s typically the result of thermal movement—panels expanding and contracting as temperatures shift, and how those materials interact with the surrounding structure.

The key is understanding it before it becomes an issue.

With the right design decisions, detailing, and installation approach, you can help minimize noise from the start – long before the first panel is installed.

Want to get ahead of it? Dive into the blog to learn best practices for preventing roof noise at the design and build stage: https://www.drexmet.com/blog/potential-metal-roofing-issues-and-how-to-minimize-their-impact-popping-noises/

05/26/2026

🏠 Strength in a roof system goes beyond appearance – it’s about long-term performance.

The Drexel Metals 450SL profile combines a snaplock, concealed-fastener design with a 1 ½” seam and clip-based system engineered for durability and precision.

Built to support natural thermal movement, it helps maintain alignment and performance over time while reducing stress on the system.

The result: a clean architectural finish, efficient installation, and a roofing solution designed to perform for years to come.

Get the details on why 450SL stands out: https://www.drexmet.com/products/metal-roof-systems/450sl-profile/

05/21/2026

When it comes to a roof, it’s always good to be prepared for anything.

Because what looks still from the ground is actually constantly responding to its environment. As temperatures shift throughout the day and across seasons, metal panels naturally adjust in small, controlled ways.

That’s where snaplock and clip systems come in.

Instead of locking every panel rigidly in place, these systems are designed to accommodate movement – holding the roof securely while allowing it to expand and contract as needed.

It’s a quiet kind of engineering detail, but an important one: helping the roof stay stable, aligned, and performing as intended over the long term.

Sound like a system your next project needs? View your options 🔗 https://www.drexmet.com/products/metal-roof-systems/

05/19/2026

Wildfires move fast, spread unpredictably, and test everything in their path.

👉 That’s why material choice matters long before a fire risk ever shows up.

Metal roofing and siding systems like those from Drexel Metals are non-combustible, meaning they won’t ignite or contribute fuel when exposed to direct flame or airborne embers. In wildfire-prone regions, that’s a critical layer of protection—helping reduce one of the most common ways fire spreads: vulnerable exterior materials.

But it’s not just about resistance. It’s about resilience. Drexel Metals systems are designed to maintain their integrity under extreme conditions, supporting buildings that are built to last through more than just everyday weather.

National Wildfire Awareness Month is a reminder: preparation isn’t just about response – it starts with what you build with in the first place.

See how metal roofing has proven to be a reliable system with this case study: https://www.drexmet.com/case_studies/eldridge_home_casestudy/

05/14/2026

Are you excited for the FRSA Florida Roofing & Sheet Metal Expo this June?

We look forward to connecting with you at 𝗯𝗼𝗼𝘁𝗵 𝟵𝟬𝟱 to explore solutions designed for performance, efficiency, and flexibility on the jobsite – from coil and flat sheets for onsite fabrication to profiles that deliver both durability and design versatility.

📍 Kissimmee, Florida | June 11-12, 2026 | Booth 905

Plan your visit: https://www.floridaroof.com/frsa-expo

05/12/2026

🌡️ Temperature changes are a natural part of any building system – and metal roofing is no exception.

As conditions shift, metal panels subtly expand and contract. The performance of the system comes down to how that movement is managed.

That’s where snaplock and clip systems make a difference. Rather than rigidly fixing panels in place, these systems allow controlled movement while keeping everything secure, aligned, and weathertight.

The result is a roof that works with the environment – not against it – supporting long-term durability and clean, consistent performance over time.

See the strength behind these concealed fastened systems: https://www.drexmet.com/products/metal-roof-systems/

05/08/2026

A great roof does more than protect a structure – it balances performance with design that stands out.

This 10,000-square-foot Utah home required precision at every turn, with complex geometry, multiple intersecting roof planes, and no room for compromise on durability or finish. Metal made it possible to deliver all three: strength, adaptability, and clean architectural lines.

Manufactured by Drexel Metals and installed by Viotell Metal Concepts, the project was recognized with a Metal Roofing Alliance Residential Award for excellence in both design and performance.

See what made this project an award winner:

MRA announces two Best Residential Metal Roofing Project winners for Q-1 2026. A show-stopping roof located in Promontory, Utah has been chosen as a top winner of Metal Roofing Alliance’s (MRA) Best Residential Metal Roofing Project competition for the first quarter of 2026. Manufactured by MRA me...

04/30/2026

Building a complete system with Drexel Metals components doesn’t just deliver high-performance...

—it also unlocks access to Drexel Metals’ industry-leading Gold Standard Anti-Weathering Warranty.

Coverage & benefits include:
→ Material costs
→ Replacement labor costs
→ Full transferability from one homeowner to the next

Explore a sample warranty to see if your project qualifies.

Because when every layer works together, your coverage should too.

Curious how metal stacks up against asphalt shingle warranties? Check out our latest blog: https://www.drexmet.com/blog/comparing-roof-warranties-metal-roofs-vs-asphalt-shingles/

04/28/2026

Every layer in a roofing system plays a key role – but the final layer is what the world sees and what takes the brunt of the elements.

After insulation, underlayment, and fasteners have done their part, the metal panel becomes the first line of defense against weather, temperature shifts, and time itself.

That’s why choosing the right panel matters.

From profile selection to color choice, each option offers unique benefits – whether it’s enhanced weather resistance, design flexibility, installation efficiency, solar reflectance, or just esthetic preferences.

The right choice depends on your project’s goals, environment, and performance expectations.

⭐ A complete system is only as strong as its final layer.

Check out your options and build with confidence: https://www.drexmet.com/products/metal-roof-systems/

04/23/2026

We’ve built the foundation. We’ve added protection.

Now it’s time for the layer that brings it all together: fasteners.

Profile-specific fasteners are engineered to match the exact roofing system – ensuring secure attachment, long-term performance, and resistance to wind uplift and movement.

They may be small, but they play a critical role in maintaining the high-performance standards metal roofing is known for.

Many systems feature concealed fasteners, hidden beneath the panel surface, where they’re protected from the elements.

The result? Fewer opportunities for water infiltration and a clean, uninterrupted finish.

Final layer coming next… 👀

In the meantime, view our full line of clips and fasteners: https://www.drexmet.com/products/clips/