11/14/2023
Upfitter switch wiring harness for f150 tremor or raptors.
Turn the short, poorly placed, hard to get to factory upfitter wires into easy to access, plug n' play connections to easily add accessory lighting and other electrical accessories to your factory upfitter switches.
https://cblightingdesigns.myshopify.com/products/upfitter-wiring-harness (link in bio as well)
This harness takes your 6 factory upfitter wires and converts them to 6 x 2 pin(power and ground) waterproof connectors. Adding auxiliary lighting couldn't be any easier.
Only Tools Needed:
Wire st*****rs to strip the factory wiring
Heatgun/Hair dryer or lighter to shrink shrink tubing
Wrench to add ground lines to battery negative terminal
Note: The 2 15amp switches are limited to 13 amps due to connector limitations. if you need more than 13 amps for a specific accessory, use a relay and use the upfitter connection as a trigger for the relay.
Also included are 6 x 2 pin male connectors with pigtails to splice to any accessories that don't come with this type of connector so that hook up is easy and fast.
Compatibility:
2021+ F150 Tremors
2021+ F150 Raptors (Note: One of the factory upfitter wires is already consumed by a set of fog lights so only 5 additional ports are useable on this harness)
Gen 2 F150 Raptors
Note: harness received may appear different physically based on materials available at order. Functionality will be unchanged. Differences would be in sheathing color.