Industrial Dynamic Services LLC

09/07/2026

Out here pushing every single day because the grind is real! 🛠️ Facebook asked what motivates me, and the answer is simple: building the highest quality rakes and rippers for my customers. Seeing a finished build head out to a job site makes all the hard work worth it. Let’s get to work!

09/06/2026

Out here in the shop working on another 42 inch rake, this one customer wants 3/4 thick Ar400. Its for a kx040. A little preheat before welding.

09/04/2026

09/03/2026

A couple local pickups that went out, one ripper for a kx040 and the other was for a Bobcat e42.

09/03/2026

Here is a video of the reversing bucket adapter showing how it attaches

09/03/2026

If you need a way to spin your bucket around with the factory kubota quick connect we offer these. Shipped this one out last week.

08/28/2026

Finished up another reversing bucket coupler and used one to set the hanger ears on a Kx040 ripper. If you need a way to spin the bucket around on the 3 to 4 ton Kubota mini excavators this is it. Uses the correct geometry to get the most from the machine.

08/26/2026

Replacable rear cutting teeth

Here is a video to show the cutting ability of the replacable cutting tips, rippers dont have to be for just pulling, and you can only pull so much with the smaller machines. Now you can cut the roots up closer to the stump saving time and less of a mess with cutting teeth on the backside.

A little testing with the Razor Back replacable rear teeth to demonstrate how it cuts. We were getting some footage for a video had a drone going too when I took down a stump but anyways here is a little clip just showing how it cuts, its very mean.

08/23/2026

Welding up some rippers today, prepping them for the mounting ears.

08/23/2026

These ears pulled pretty good in welding even with the braces I had on them. 9 inchs is where they need to be. A little straighting action video.