Hutchins Hutchins Smith LLC

04/13/2022

7' x 16' Trailers, 38" x 13" x 10" Aluminum toolbox, 3' gate, spare tire mount and a spare tire, 13" tall sides. Has a 7k drop leg jack mounted. 2 5/16 coupler. All three trailers have tandem 3500lb axles with electric brakes, they each have LED lights. 4" channel tongue with a 3" channel frame w/ dovetail. These trailers in the pictures are going around $6,000-$7,000 normally. However, we are going to list them for a short while for $4,800.

Call or message for all of your metal and fabrication needs.
Office (803) 955-2381

04/12/2022

These are some custom mat holders we fabricated for Frank's Car Wash. Some got powder coated red and others were left with a shiny aluminum finish.

Contact us for all your metal and fabrication needs.
Office - (803) 955-2381

04/01/2022

This is a bulldozer owned by one of our customers and family friend Mike Sturkie. You can see here where we added plates to either side of the blade for reinforcement. Cut and bent the plates here in shop and welded onsite.

Call or message for any and all of your fabrication needs.
Office- (803)955-2381

02/18/2022

A customer of ours came in wanting a couple ramps mounted to the rear of his box truck. We fabricated the ramps and dovetail, adding some new brake lights to the bottom of the dovetail. We also mounted a receiver hitch so that accessibility is not a problem.

02/17/2022

We recently had a customer come in wanting to do some modifications to his trailer, specifically somewhere to store his forks. He can now put his forks under the trailer to take with him while still using the entire trailer deck.

02/15/2022

08/11/2021

Our good friend Mike Brown purchased a gorgeous Ram 3500 cab and chassis to haul with but didn't have a flatbed to mount on the rear of the truck frame. We stepped in and fabricated the pictured bed from the bottom up. Everything was custom built to meet Mike's individual needs. Soon we'll be fabricating a front skid plate for him as well. More pics to follow!