Jak Stoll Performance

Jak Stoll Performance I am a Master Automotive Technician, engine management tuner, fabricator and manual machinist . I pride myself on solving problems quickly and elegantly.

I am a master level automotive technician/diagnostician with 39 years of experience. I am also a manual machinist, a welder fabricator and engine management tuner. I have worked extensively with a broad range of very complex mechanical systems and machinery. I am passionate about learning and applying new technologies to build, diagnose and repair machinery. I have worked with CNC machines, lathes

and mills both repairing them and using them to make parts. I am a dedicated worker with proven experience managing small groups. As a diagnostician I am an innovative problem solver, able to break complex computer driven mechanical systems down to their simplest form to diagnose them quickly and accurately. I am a loyal team player. I currently hold ASE Master and ASE L1 certifications as well as being a factory trained and certified BMW technician

I recently did a custom dual alternator setup for a very unique car with a really big stereo, it required some machining...
10/06/2025

I recently did a custom dual alternator setup for a very unique car with a really big stereo, it required some machining, cad, fabrication and mechanical work... It was a fun challenge. I implemented a tensioner setup on the back side of the bracket which pushed down on the tensioner pulley between the alternators

Have a great week, please be kind to each other and look for the similarities not the differences in one another
Jak

I wondered I share this video I took of the start of this drag car that I'm building.. This Will be the quickest / faste...
03/26/2025

I wondered I share this video I took of the start of this drag car that I'm building.. This Will be the quickest / fastest car I've ever built.. I'm hoping to do 8 seconds or faster in the quarter mile once I learn how to drag race better 🙂
I have a spare shell for my E30 drift car, I'm building a four-link drag car using a Ford 9-in rear end, a turbo 400 hydromatic with a reverse pattern trans brake valve body, some 4l80 parts and everything else from FTI...
The engine will be a rod and piston 5.3 with a mild camshaft and twin 7875 turbos... I should be able to push the engine till I lift the heads
I wish everyone the best🙂 I'll put up a link to the video and a couple of other pictures I have https://youtu.be/7GBrumvJaN8?si=lpXvHDh0UC3cgcrz

I have this beautiful one owner 95 Dodge Dakota here... The customer is having me install a gen 3 hemi into it with a Ho...
01/07/2025

I have this beautiful one owner 95 Dodge Dakota here... The customer is having me install a gen 3 hemi into it with a Holley Terminator xmax... We will be running it drive by wire and one of the challenges with that is that the transmission has a throttle valve cable that needs to be pulled by the throttle linkage... I was able to extend the shaft on the drive-by wire throttle and make a arm and a cable stay to attach the cable... Also between the brake booster and the front differential being directly under the pan, getting the engine height just perfect was difficult and I still had to remove a bit from the oil pan to clear the front differential... There are mounts and other parts available for the two-wheel drive version of this truck but nothing really for the four-wheel drive So of course I've had to fabricate the engine mounts, prototyping them first in 16 gauge...
This customer, like all of my customers has been absolutely amazing to work with... I will try to post some more progress with this job as it comes along 🙂
I hope everybody has an amazing 2025
Jak

10 second drift car :-)
11/14/2024

10 second drift car :-)

11/14/2024

10.5 at 136 mph 7.0 in the 1/8 at 107 mph .. not bad for a little 4 cylinder Saab engine
I'm sure with a little more work on my driving and a sprinkle of boost low 10s and maybe even a 9 are possible
Hope everyone is well
Jak

You folks made my weekend... I have looked through my friends list and am having trouble finding you... I was distracted...
07/22/2024

You folks made my weekend... I have looked through my friends list and am having trouble finding you... I was distracted with my car and the event and i should have made sure we were connected... Please DM me or reach out somehow and I'll send some stickers and maybe something cut out of metal ...
I had several people stop by who were interested in the car or who I had tuned remotely for and all of you were very nice and I appreciated the kind and encouraging words very much...
This family in particular will be one of the moments in my life that i will remember for the rest of my life as a high point...
What I want you to know is that you dropping by and being so gracious and kind really made my day even though I was struggling a little with the car... And a lot of rain at the event..you definitely made it really good for me
Thank you very much
Jak Stoll

Thank you Colin Stava for this awesome shot of driftmo :-) I had an amazing weekend with Drift Indy May Drift Day Thank ...
05/27/2024

Thank you Colin Stava for this awesome shot of driftmo :-) I had an amazing weekend with Drift Indy May Drift Day
Thank you Edgar, Derek King, Dan Perlenfein, and all the staff and media ... It was a very well run and fun event and I can't wait to get back up there next month

Address

437 Northridge Drive
Lexington, KY
40505

Website

Alerts

Be the first to know and let us send you an email when Jak Stoll Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jak Stoll Performance:

Shortcuts

Share

Category