Hill Country Forced Induction

Hill Country Forced Induction Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Hill Country Forced Induction, Automotive Parts Store, 2600 s Janice Street, Las Cruces, NM.

Here at Hill Country Forced Induction we specialize in building/rebuilding turbochargers, billet compressor wheels, porting and powder coating/ ceramic coating.

Hello everyone. Unfortunately our local cell tower went down and we do not have any service or internet right now. At th...
06/10/2026

Hello everyone.

Unfortunately our local cell tower went down and we do not have any service or internet right now.

At this time we are unsure when it will be back up.

If you message us on any email, social media platforms or are trying to call or text us you will not get a response. Please do not think we are ignoring you.

We will make an updated post once everything is back up.

Thank you!

Boost Controlled Performance BCP x500 to x500r conversion This turbo was sent in for a rebuild along with conversion to ...
05/14/2026

Boost Controlled Performance BCP x500 to x500r conversion

This turbo was sent in for a rebuild along with conversion to the larger x500r setup.

It received the following

-2 port billet thrust bearing
-staggered front and rear oil seals
-larger 9 blade point milled billet compressor wheel
-larger custom D5 5+5 blade turbine wheel
-wrinkle red powder coat finish on the compressor housing
-black ceramic coating on the turbine housing

This turbo will make more overall power than the previous x500 setup it was converted from and spool up quicker than the stock x500r setup.

If you are interested in having your turbo converted to something like this, send us a message and we will get you setup. We also have the D5 turbine wheels available for the x500 units.

We are super busy right now with current builds and are experiencing longer than usual build times. As per always, we do not guarantee build times and rarely have anything on the shelf ready to ship. Thank you for your continued support and patience- Adrian

IHI VF52 This turbo was rebuilt to stock specs with upgraded internalsIt received the following -billet thrust bearing -...
05/13/2026

IHI VF52

This turbo was rebuilt to stock specs with upgraded internals

It received the following
-billet thrust bearing
-staggered oil seals
-chartuese powder coat finish on the compressor housing
-black ceramic coating on the turbine housing
-resurfaced flanges

We have plenty of options available for the VF52 setups including the G25-550 billet compressor wheel, D5 turbine wheel, ball bearing conversion and stock size inlet T51r mod.

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf52/

All of our turbochargers are built to order. We rarely have anything on the shelf ready to ship. We are super busy during this time of year. Please keep that in mind when placing your order and as always, thank you for your patience- Adrian

Custom HCFI Subaru VF series turbo with all the upgrades. This turbo is one of our HCFI VF series lineup with a number o...
05/12/2026

Custom HCFI Subaru VF series turbo with all the upgrades.

This turbo is one of our HCFI VF series lineup with a number of added options.

Most notable is the stock size inlet T51r mod! You will not find any other VF series turbos on the market with this as an available option other than from us at HCFI.

This turbo also received a dual ball bearing conversion, G25-550 9 blade billet compressor wheel and a G25 profiled D5 5+5 blade turbine wheel.

This turbo is capable of over 400whp with supporting mods and fuel while keeping spool up close to stock.

As always, this turbo also received powder coat finish on the compressor housing in wrinkle black and a black ceramic coating on the turbine housing.

An absolutely killer setup right here!

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/subaru/

As a reminder, all of our turbos are built to order. We are super busy this time of year and will be moving as quickly as we can. Thank you for the patience as always 🙏-Adrian

Hello everyone, this is an update post for currently placed orders. As most of you are aware, this time of year is extr...
04/27/2026

Hello everyone, this is an update post for currently placed orders.

As most of you are aware, this time of year is extremely busy for us. We're working as quickly as we can do get everyone's orders out the door but lead times can and do run longer than normal.

As stated on our website, individual listings and in our terms/conditions, we do not guarantee a delivery or build date. Once your turbo is done you will either be notified personally or will receive an update via our website.

I thank all of you for the continued support and patience as we work through everyone's builds.

-Adrian

HCFI G25-550 spec stock location turbochargerThis is one of our G series spec turbos for the Subaru stock location setup...
03/04/2026

HCFI G25-550 spec stock location turbocharger

This is one of our G series spec turbos for the Subaru stock location setups.

All of our G series setups include the following

-dual ceramic ball bearings
-billet bearing cages
-staggered oil seals
-point milled billet compressor wheels
-D5 5+5 blade turbine wheels
-all gaskets, oil feed and return lines and coolant lines
-billet adjustable wastegate actuator
-black ceramic coating on the turbine housing

This particular turbo also received the optional 3" compressor housing with a wrinkle red powder coat finish.

If you are interested in one of our G25 spec turbochargers for the Subaru stock location fitment, they can be found here.

https://hillcountryforcedinductions.com/subaru-stock-location-g25-series/

HCFI G series!This is one of our stock location G series turbochargers for the Subaru platform. We offer these in the G2...
03/03/2026

HCFI G series!

This is one of our stock location G series turbochargers for the Subaru platform.

We offer these in the G25, G30 and G35 lineups.

Multiple options for all of these which include the following

-Point milled billet compressor wheels
-D5 5+5 blade turbine wheels
-dual ceramic ball bearings with billet bearing cages
-billet adjustable wastegate actuators on the IWG setups
-2.5" and 3" compressor housings
-T51r mods
-multiple sizes for turbine housings
-oil feed, coolant and oil drain lines included as well as up pipe/down pipe gaskets
-powder coating choice on the compressor housing
-black ceramic coating on the turbine housings

If you are interested in one of our turbos, you can find them here.

https://hillcountryforcedinductions.com/subaru/

Custom HCFI VF48 turboThis is one of our custom VF48 frame turbochargers with all the upgrades!Along with our standard b...
03/02/2026

Custom HCFI VF48 turbo

This is one of our custom VF48 frame turbochargers with all the upgrades!

Along with our standard billet thrust bearing, journal bearings and staggered oil seals, this turbo received the following.

-58mm T51r style compressor housing mod
-G25-550 9 blade point milled billet compressor wheel
-TD05h sized 9 blade turbine wheel
-wrinkle red powder coat finish on the compressor housing
-black ceramic coating on the turbine housing
-gasket matched/knife edged porting

This turbo is absolutely killer with power capabilities into 400+whp.

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf48/

IHI VF52 turboThis turbo came out absolutely beautiful!It received a rebuild with the following-billet thrust bearing-bi...
03/01/2026

IHI VF52 turbo

This turbo came out absolutely beautiful!

It received a rebuild with the following
-billet thrust bearing
-billet journal bearings
-staggered front and rear oil seals made of heat treated tool steel
-stock sized billet compressor wheel
-wastegate crack repair/reinforcement
-Illusion Sour Apple powder coat on the compressor housing
-black ceramic coating on the turbine housing

Whether your looking for a oem+ rebuild or a fully modded turbo, we got you covered.

Stock size and larger billet compressor wheels and high flow turbine wheels, ball bearing conversions, upgraded bearings ect....

If you are interested in one of our VF52 turbos, you can find them here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf52/

HCFI custom VF48 G25-550 D5This is one of our customers VF48 frame turbochargers This turbo received a G25-550 9 blade p...
02/28/2026

HCFI custom VF48 G25-550 D5

This is one of our customers VF48 frame turbochargers

This turbo received a G25-550 9 blade point milled billet compressor wheel with a G25 profile D5 5+5 blade turbine wheel.

It also received a billet thrust bearing, journal bearings and staggered front and rear oil seals made of heat treated tool steel.

This turbo is capable of 400+whp with the correct setup and fuel type.

If you are interested in one of these, they can be found here.

https://hillcountryforcedinductions.com/rhf55-ihi-vf48/

Address

2600 S Janice Street
Las Cruces, NM
79756

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Hill Country Forced Induction posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hill Country Forced Induction:

Shortcuts

Share

Category