Midwest Performance Shop

Midwest Performance Shop Enderle -Waterman- Fuel System Expert for Mechanical and EFI Injection systems: - street
-Mud Racing- Tractor and Truck Pulling- Mega Truck-Boat.

We are The Largest Worldwide Dealer for The Blower Shop Superchargers

DMPE BILLET 8/71 BLOWER FOR SALE. Comes with Billet case 5" SSI snout, Janis billet spacer, DMPE rotors. Setup for 45% O...
03/02/2026

DMPE BILLET 8/71 BLOWER FOR SALE. Comes with Billet case 5" SSI snout, Janis billet spacer, DMPE rotors. Setup for 45% OD
fresh from Janis with zero runs!!

Selling for $6500 complete plus shipping

Message us if interested

Mopar Plymouth Dodge 340 SIX PACK ORIGINAL Intake  #341868Price: $4,000IF you see this ad it’s available will not reply ...
08/02/2025

Mopar Plymouth Dodge 340 SIX PACK ORIGINAL Intake #341868

Price: $4,000

IF you see this ad it’s available will not reply to Is this available. Serious buyers only CAN be SHIPPED Item listed is from 1970 340 AAR automatic > Lid, fiberglass base plate-outer part of base was trimmed off in early 80s, and ORIGINAL Chrysler manifold 3418681. K&N air filter. Carb numbers are as follows: FRONT 3577185,4790, 2226. CENTER 3577183, 4792, 2117 and REAR 3577185, 4790, 3326.
Most parts are from climate controlled storage since early 80s.

If interested do not hesitate to contact. Can ship on buyers expense. Have boxed to ship if needed. Located at Lake Park, Mn for instate buyers

SOLD, SOLD632 Profiler Big Chief Intake FOR SALE. We have this Profiler tunnel ram. 10.200 deck. Which was used on a 632...
07/22/2025

SOLD, SOLD

632 Profiler Big Chief Intake FOR SALE. We have this Profiler tunnel ram. 10.200 deck. Which was used on a 632 with 12deg profiler heads. Comes with 2 1250 carbs. Single fogger kit. Throttle linkage. Powder coated black. Prefer local pick up. Willing to ship at buyer’s expense

Just so you know these are pretty expensive INTAKE MANIFOLDS.

Lake Paul, Mn

Sold❌ BRAND NEW The Blower Shop Billet Hi Helix Gas 14-71 blower BBC and EFI SetupBrand new (only taken out of the box f...
05/22/2025

Sold❌

BRAND NEW The Blower Shop Billet Hi Helix Gas 14-71 blower BBC and EFI Setup

Brand new (only taken out of the box for pics) The Blower Shop Polished 14-71 Billet Hi Helix Gas blower kit for tall deck 10.2 big block chevy. Complete kit w drive pulleys belt etc.

Slightly used TBS Polished EFI Injector Plate assembly (no injectors)

BDS Billet Forward injector mounting plate.

NEW 3 Hole Bugcatcher hat.

INCREDIBLE setup for pro street drag or show

Can ship for additional cost

Located in Lake Park, Mn 56554

Drop in ready Mopar 400 530 big block engine. It Has rv cam double roller timing chain and aluminum intake. Heads are 45...
05/16/2025

Drop in ready Mopar 400 530 big block engine. It Has rv cam double roller timing chain and aluminum intake. Heads are 452 harden seat heads. The block is a 530 block the next best block to the 230 blocks. Complete intake to oil pan. Also has new distributor plugs wires cap and rotor all ready to go also big block motor mounts as well.

SOLD‼️, SOLD‼️, SOLD‼️

05/11/2025

Happy Mothers Day Everyone.
Wishing you all the bestest of days.

Monday arvo regular at our Digs 😉💥🚫🐀                                  #🚫🐀
05/06/2025

Monday arvo regular at our Digs 😉💥🚫🐀
#🚫🐀

Today’s featured rebuild - a 1961 Jaguar Mark II engine restored to original specs.  The cylinder head was repaired befo...
05/06/2025

Today’s featured rebuild - a 1961 Jaguar Mark II engine restored to original specs. The cylinder head was repaired before doing a complete valve job and resurface. We honed the block before installing new piston rings and bearings. The rebuilt starter and generator were added before test running the engine.

This Independent Front Suspension system that you can installing on your 32 Ford Roadster. We've done a couple of these ...
05/06/2025

This Independent Front Suspension system that you can installing on your 32 Ford Roadster.
We've done a couple of these set of upgrades phase suspension now, and it's proven that moving the lower shock location inward gives you an even smoother ride and more travel in the suspension. With less angle on shock, you'll use a lighter spring rate, hence a smoother ride and the mechanical advantage it has for more travel. Also we use a cross shaft and shims for camber/castor alignment on upper arm to make adjustments super easy. accepting shipping Location MN.



I have a 1923 ford t-bucket, I traded for it, put your engine in it and drive up for a grabs can be yours. With the titl...
05/06/2025

I have a 1923 ford t-bucket, I traded for it, put your engine in it and drive up for a grabs can be yours.
With the title, All the parts are available. Asking $7500 for this beauty

UniSteer from Speedway. Purchased for mock up only. $499.00 is the new price Asking $300.00 can ship or Local pick up
05/06/2025

UniSteer from Speedway. Purchased for mock up only. $499.00 is the new price Asking $300.00 can ship or Local pick up

Address

20782 Co Highway 5
Lake Park, MN
56554

Website

Alerts

Be the first to know and let us send you an email when Midwest Performance Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share