Sunstar Metal

10/30/2026

An anchor is the one piece of gear you never want to test twice.

CE certified Bruce-style anchor with strong holding power across sand, mud and mixed seabeds. Self-launching geometry, so it sets quickly instead of dragging.

- CE certified
- Proven Bruce claw profile
- Galvanised / stainless options by model
- Container and LCL quantities available

Check the listing:
https://www.alibaba.com/product-detail/CE-Certified-Bruce-Anchor-Shining-Brand_1601577303953.html

10/29/2026

316 stainless, oval hawse, mirror-clean edges.

If you are specifying mooring hardware that has to survive years of salt, sun and tension, this is the version that does not come back as a warranty claim.

- 316 marine-grade stainless steel
- Rounded inner radius protects line and rope
- Fits deck and hull-side installations
- OEM and custom sizes on request

Full listing:
https://www.alibaba.com/product-detail/Boat-Stainless-Steel-316-Oval-Hawse_62269576831.html

10/28/2026

Rope wear is quiet until a line fails at the worst possible moment.

An oval hawse pipe gives the mooring line a smooth, radiused path through the hull or deck edge, so chafe happens to the fitting instead of your rope.

- Oval profile, polished contact surface
- Stainless steel construction
- Clean fit for deck and hull mounting

Details and sizes:
https://www.alibaba.com/product-detail/Oval-Hawse-Pipe-for-Marine-Hardware_62151420552.html

10/27/2026

A cleat that disappears when you do not need it.

316 stainless steel pop-up cleats sit flush with the deck when retracted, so nothing catches a line, a foot or a fishing net. Pull up, tie off, drop back down.

- 316 marine-grade stainless steel, not 304
- Flush profile, no trip hazard
- Rated for mooring and docking loads
- Bulk pricing for yards and builders

Specs here:
https://www.alibaba.com/product-detail/Marine-Grade-316-Stainless-Steel-Pop_1601525181778.html

10/23/2026

Four steps, one solid frame, zero wobble.

The YUMU Marine 4-step stainless steel ladder is the version our repeat buyers keep reordering, because it holds up season after season instead of rusting at the joints.

- Marine-grade stainless steel
- Four-step boarding for higher freeboard boats
- Suited to yachts, sailboats and pontoons
- Wholesale tiers available

See the full listing:
https://www.alibaba.com/product-detail/YUMU-Marine-Stainless-Steel-4-Step_1601570848907.html

10/22/2026

Deck space is the most expensive square meter on any boat.

This under-mount outboard telescopic ladder stores completely out of the way and drops down only when someone needs to get back aboard.

- Three-step telescopic extension
- Under-mount design keeps the deck clear
- Stainless steel construction for saltwater environments
- Fits outboard and sterndrive layouts

Specs and OEM options:
https://www.alibaba.com/product-detail/Under-Mount-Outboard-Telescopic-Three-Step_62524769034.html

10/21/2026

Chlorine, salt, sun, daily use. Pool and boarding ladders take a beating, and cheap steel shows it within a season.

This stainless steel marine ladder is built for continuous water contact: stable footing, clean welds, no flaking finish.

Suitable for pools, marinas, docks and tenders. Multiple configurations to fit your installation.

Ask for the spec sheet and wholesale pricing:
https://www.alibaba.com/product-detail/Marine-Equipment-Swimming-Poor-Ladder-Stainless_1600303334459.html

10/20/2026

Boarding the boat should not be the hardest part of the day.

Our 4-step folding telescoping ladder is marine-grade stainless steel, folds flat when stowed and extends in seconds when you need it.

- Corrosion-resistant in saltwater use
- Compact stow, fits pontoons, yachts and docks
- 3-year warranty
- MOQ from 1 unit, OEM logo and custom packaging available

Full specs and wholesale tiers:
https://www.alibaba.com/product-detail/4-Step-Folding-Inflatable-Telescoping-Swim_1601394504458.html

10/17/2026

Casting and machining marine-grade metal parts — since 1995.

Sunstar Metal (Dongying Sunstar Metal Products Co., Ltd.) runs a 40,000 m² facility in Shandong, China, supplying marine hardware, pump and valve parts and custom castings to boat builders, equipment makers and OEM buyers.

WHAT WE DO
• Investment casting, sand casting and precision casting
• CNC machining and surface finishing
• Marine hardware: anchors, cleats, bollards, deck fittings, rigging components
• Pump and valve parts, impellers
• Custom parts to your drawing or sample

MATERIALS
Stainless steel (304 / 316), bronze, brass, aluminium, carbon steel

HOW WE WORK
Send a drawing, sample photo or spec sheet. You get a quote, tolerance review and lead time, usually within 24 hours on business days.

07/07/2026