Northeast Hydraulics Inc.

06/06/2023

Fluid conducting swivel joints greatly reduce the stress on hydraulic hoses that have torque forces applied during operation. Browse our selection of Hydraulics Inc. live swivels for you next job!
https://www.northeasthydraulicsinc.com/collections/in-line-swivel

04/22/2022

04/20/2022

If you have been in the hydraulic industry long enough, you know fluid in 55-gallon drums is never completely free of contaminating particles. It is good practice to pre-filter all fluid prior to being added to your equipment.

04/19/2022

04/17/2022

This filtration unit is capable of 75 GPM. It is powered by a three-phase 5 horsepower electric motor coupled to a 75 GPM vane pump. The element housings we chose utilize a quick disconnect cover allowing for easy and efficient filter change-outs. It is a simple design, yet effective way of conditioning system fluid.

https://www.northeasthydraulicsinc.com/blogs/recent-projects/75-gpm-filtration-unit

04/16/2022

https://www.northeasthydraulicsinc.com/

04/15/2022

This hydraulic kidney loop filter panel was built with special requests from our customer. They required a water-cooled oil cooler to be incorporated into the filtration circuit. Also, having a built-in oil sampling port was important to make it easier for them to be able to follow their maintenance schedule. We were able to fit all of this onto a wall mounted panel with a drip pan.

https://www.northeasthydraulicsinc.com/blogs/recent-projects/kidney-loop-panel-with-oil-cooler

04/14/2022

World Wide Fittings 150 piece cap & plug kit. This kit offers a great selection of sizes for whatever the job throws at you.

Kit contains a variety of JIC, O-Ring Boss, Face and NPT plug and caps.

https://www.northeasthydraulicsinc.com/collections/cap-plug-kits/products/cap-plug-kit-150-pcs

04/13/2022

https://www.northeasthydraulicsinc.com/blogs/recent-projects/duramax-filter-cart

04/12/2022

This hydraulic power unit was built for a local municipality to be able to run their salt spreaders without the need to be plumbed into the vehicle. This gives them the ability to lubricate the drag chains and confirm the hydraulic motors are in correct operating order while in the storage area. This unit has a 2 GPM pump coupled to a 2-horsepower single phase electric motor. Fluid flow is directed via the D03 solenoid operated control valve that is manifold mounted. Also, within the manifold is the pressure relief valve providing a compact package of fluid control components. Fluid returning from the sander is filtered before entering the 5-gallon reservoir.

https://www.northeasthydraulicsinc.com/blogs/recent-projects/snow-sander-power-unit

04/11/2022

https://www.northeasthydraulicsinc.com/collections/suction-strainers