360 Degree Machinery

360 Degree Machinery Finding quality machinery can be difficult. Our goal has always been to sell you what we would purchase for ourselves.

We are located with in the Tennessee Technology Corridor right off of I-40 just west of Knoxville in Kingston, TN 37763.

04/16/2026

2017 SCM Pratix S15 C CNC Machine – 5′ x 12′ Flat Table

04/16/2026

2012 Weeke Model Optimat ABD050 Boring and Dowel Insertion Machine

04/16/2026

2024 QuickWood CB1000 “The Beast” Oscillating Brush Sander

04/16/2026

Ligmatech MPH 450/25/09 Case Clamp – Euro Style

04/16/2026

NEW IronBull Sawdust Dust Hoppers (Dump Bins) for ALL Dust Collectors

04/16/2026

2013 Italpresse Primatist 25-L Case Clamp

10/08/2025

Black Bros Top & Bottom 60″ Panel Cleaner

This machine was refurbished and never put into production. So if you want to find a cleaner one you will have to buy NEW! Cleaned, Checked, NEW Rolls, Spare Rolls, New Brushes, Paint…..

61.5” Wide Capacity (max. brush width)
4-3/4” Thickness Capacity
Upper Elevator
Tampico Fiber Brush Rolls (This is what we believe them to be)
3 hp Feed Drive
Feed Speed: 80 FPM
Hand Wheel Adjustment
(2) Dust Outlets
30” Pass Line
Voltage: 230/460V/3-Phase
Requires 2800 CFM
Weight 2600lbs
This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN

10/08/2025

Centauro MM24 Bandsaw W/NEW Laguna DX3 Driftmaster Fence

This is a 2011 Centauro labeled MM24 bandsaw and yes it pretty much is the same as a SCM minimax MM24 as Centauro built the minimax. The only difference are the graphics. This MM24 is powered by a 7.5 hp 220V/3-Phase motor. It has a 24″ resaw height. Has a 0.25″ – 1.5″ band width capacity with that blade being 196″ long. We did add a NEW Laguna DX3 Driftmaster Fence.

This fully functional machine has been fully cleaned and checked and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.

10/08/2025

Rees C1030-6 (10 HP) 4000 CFM Dust Collector

This is a pretty straight forward affordable 4,000 CFM dust collector. It’s powered by a 10 hp (230/460V/3-Phase) fan with an 11″ inlet. (6) total discharge plastic bags on the bottom and (6) NEW American 24″ X 48″ filter bags up top. This Reese is 150″ wide, 54″ deep and 105″ tall approximately.

This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN

10/08/2025

SAVI TFK-700 Cross Cut Veneer Clipper

This is a hard to find machine and they haven’t changed all that much over the years. 700mm/27.5″ capacity. Hydraulic movement of blade with dual palms for safety. 3kW(4 HP), 220-240/440-480V/3-phase pump motor. Green guide lights shows where the cut will fall. We also sent the blade out to Federal Knife to be sharpened. So it is good to go!

This fully functional machine has been fully cleaned and checked and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.

10/08/2025

JKO HM4 DUAL Arbor Hauncher W/1-1/4″ Arbors

The JKO Hauncher is a somewhat legendary machine in the wood industry. This one is a little bit different in that at some point in it’s like it was modified and now has twin 1-1/4″ arbors. The arbors are 7″ long with the threads with aprox. 5″ of non threaded arbor space. Power is provided via a 5.5 kw/7.5 hp motor. The bottom of the arbor has 6.5″ of clearance off the tabletop and when the bottom of the arbor reaches the table top it will return. Single pneumatic hold down. Momentary foot pedal to cycle. Very rare to find a hauncher with 1-1/4″ dual arbors!

This fully functional machine has been fully cleaned, checked, and is ready to work from the time you receive it. This is our guarantee to both you and your company. It is owned by 360 Degree Machinery and located in our inventory in Kingston, TN.

Address

765 Gallaher Road
Kingston, TN
37763

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when 360 Degree Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 360 Degree Machinery:

Shortcuts

Share

Category