DIY Metal Fabrication

09/03/2026

Samsung TV Screen Separating From the Frame? Here’s Why It Happens and How I Fixed Mine

I was out in the shop and noticed the ceiling above my 75 inch Samsung was glowing a little. Seemed odd, so I got up on a ladder to look and found the screen panel had pulled away from the frame across the whole top edge, with the backlight glowing straight up through the gap. If your Samsung Crystal UHD is doing something similar, gapping at the top, leaning forward, or leaking light around the edges, you aren't alone....

I was out in the shop and noticed the ceiling above my 75 inch Samsung was glowing a little. Seemed odd, so I got up on a ladder to look and found the screen panel had pulled away from the frame across the whole top edge, with the backlight glowing straight up through the gap. […]

04/28/2026

Wiring the Pecron Alternator Charger From Truck to Travel Trailer | Full Install + Real World Test

In this video I walk you through how I wired up the Pecron 500W alternator charger all the way from my truck's battery, down the frame, through the floorboard, out to the receiver hitch, and all the way to the back of my travel trailer and a real world test showing it charging while running a 350W fridge and a 150W dehumidifier on the road....

In this video I walk you through how I wired up the Pecron 500W alternator charger all the way from my truck’s battery, down the frame, through the floorboard, out to the receiver hitch, and all the way to the back of my travel trailer and a real world test showing it charging while running […]

02/07/2026

RV Lithium Battery Setup for Under $1000 – NO Modifications Required!

I figured out how to add lithium battery power to my travel trailer for boondocking WITHOUT expensive permanent modifications. This setup uses a Pecron F3000 LFP battery station and lets me: ✅ Run traditional shore power ✅ Boondock on battery only✅ Hybrid mode (charge while using) ✅ Remove it in 5 minutes to use elsewhere Total cost way less than traditional lithium installs, zero cutting/wiring/fusing required, and completely portable....

I figured out how to add lithium battery power to my travel trailer for boondocking WITHOUT expensive permanent modifications. This setup uses a Pecron F3000 LFP battery station and lets me: ✅ Run traditional shore power ✅ Boondock on battery only✅ Hybrid mode (charge while using) ✅ Remove i...

01/20/2026

How I Made My RV Water Pump Almost Silent (4 Cheap Fixes That Actually Work)

If you’ve ever been woken up at 2 a.m. by your RV water pump because someone flushed the toilet or washed their hands, you already know the pain.

If you’ve ever been woken up at 2 a.m. by your RV water pump because someone flushed the toilet or washed their hands, you already know the pain. For us, it got so bad that the first thing I used to do when pulling into a campsite was hook up city water—just to avoid the […]

07/29/2025

☕ So… I just got back from an RV trip.

While watching the gas pump spin, I realized we RV’ers do, say, and think some ridiculous things.

Some of them deserved to be immortalized.
So I went on a design bender and made… an entire merch line about it. 🤷‍♂️

This mug? Perfect for:
👉 Campsite coffee mornings
👉 Road trip survival fuel
👉 Or that one friend who always “forgets” to chip in for gas

🎨 Designed by me. Printed in the USA. Available in multiple sizes and colors.

🛒 Grab one here → https://creativeenterprisesllc.com/products/moon-landing-fuel-bill-rv-mug-retro-roadtrip-humor-for-campers-vanlifers-sarcastic-travelers

07/28/2025

Apparently I get bored easily. So… new stuff.

DIY Metal Fabrication started as a page about welding, fixing, and building “serious” stuff — mic stands, accessibility ramps, beehive stands, vehicles. You know, practical things.

Then I bought a 3D printer. Then another one. Then somehow I started designing toys, weird gadgets, and mugs about RV fuel bills that make NASA blush.

So yeah… I officially gave up on “sticking to one product.”
Instead, I made a shop — Creative Enterprises LLC — to corral all the chaos into one place.

Here’s what you’ll find now:
🔧 Fab projects (because I still weld things)
🖨️ 3D prints & prototypes (because I can’t stop tinkering)
☕ Sarcastic mugs & merch (because my sense of humor pays no bills… yet)
🐝 Random stuff like foldable and adjustable beehive stands (don’t ask, just accept it)

Basically: if it can be made, printed, welded, or put on a mug, I’ll probably do it.

👉 Here’s the shop that proves it:

CreativeEnterprisesLLC

05/28/2025

Built. Packed. Shipped. 🚀
Custom drum module and accessory stand with RGB glow + hidden wiring, because boring gear has left the chat.

This one’s already on its way to its new home in Oregon,
but you can get yours here: https://creativeenterprisesllc.com/products/custom-drum-module-accessory-stand-adjustable-mount-rgb-lighting-personalized-panels

I like building cool stuff, so if you have an idea, reach out!

04/15/2025

What if I told you ChatGPT doesn’t have to be intimidating, confusing, or filled with tech bro jargon? I just dropped a new video on YouTube that walks you through everything you need to know to start using ChatGPT—even if you’ve never touched AI before. 🎥 Watch it here: 👇 In this video, I cover: What ChatGPT really…...

What if I told you ChatGPT doesn’t have to be intimidating, confusing, or filled with tech bro jargon? I just dropped a new video on YouTube that walks you through everything you need to know to start using ChatGPT—even if you’ve never touched AI before. 🎥 Watch it here: 👇 In this video,...

04/12/2025

New tools are like caffeine for your creativity—and this week, I’ve got a few to unbox. These aren’t just impulse buys; they’re upgrades that fuel better builds, faster setups, and maybe even fewer curses in the shop. 🎥 Watch the video here: What You’ll See: A fresh Amazon tool haul My first impressions (and a little tool nerd excitement)...

New tools are like caffeine for your creativity—and this week, I’ve got a few to unbox. These aren’t just impulse buys; they’re upgrades that fuel better builds, faster setups, and maybe even fewer curses in the shop. 🎥 Watch the video here: What You’ll See: These tools aren’t shelf o...