Underground Magnetics Inc

Underground Magnetics Inc We design, engineer, and sell locating systems for horizontal directional drilling.
(1)

Simple. Powerful. Affordable.The ARMOR VTX50 delivers 165 ft of range, 300 hours of runtime, 16 frequencies, 3 power lev...
09/05/2026

Simple. Powerful. Affordable.

The ARMOR VTX50 delivers 165 ft of range, 300 hours of runtime, 16 frequencies, 3 power levels, and downhole selection, all in a standard 15” housing.

More capability. Same standard housing.

The professional package built to keep your bore moving.The Mag X Pro and Nexus Pro give your crew the tools to locate f...
09/04/2026

The professional package built to keep your bore moving.

The Mag X Pro and Nexus Pro give your crew the tools to locate faster, work safer, and stay productive from setup to pullback.

HDD locating, automated bore logging, Bore-To steering, rebar frequencies, and professional utility locating, all in one package.

Less downtime. More confidence. A better way to bore.

09/03/2026

Measure distance quickly without leaving the locate screen.

A quick look at the Tape Measure tool on the Mag X Geo.

Day one matters.James Vallone was on site with Underground Kings in the Florida Panhandle, getting their new system deli...
09/02/2026

Day one matters.

James Vallone was on site with Underground Kings in the Florida Panhandle, getting their new system delivered, set up, and in the crew’s hands before an I-10 crossing.

Good training from the start makes a difference. It gives the crew confidence in the equipment, answers questions before they become problems, and makes sure everyone knows how to get the most out of the system before the first bore begins.

Need a demo or training in your area? Reach out to James.

09/01/2026

Create the job. Log each rod. Add utility crossings as you go.

A quick look at bore logging with the Mag X Geo.

Heavy tree cover, difficult terrain, major elevation changes, and a bore running deep beneath it all.Nate Strother, our ...
08/31/2026

Heavy tree cover, difficult terrain, major elevation changes, and a bore running deep beneath it all.

Nate Strother, our Northeast Territory Manager, put the Mag X Geo to work on this 1,660-foot shot in Wisconsin, reaching depths up to 105 feet.

These are the kinds of conditions that can make locating extremely difficult. The Geo kept tracking.

The crew mapped 82 points with precision GPS across the bore and never lost signal. No wireline needed.

The result was a clear picture of the bore both below ground and mapped above ground.

Bad conditions don’t change the job. They just make the right locator matter more.

The power is built in. The complexity isn’t.The Mag X Geo puts advanced locating, bore logging, and GPS mapping into one...
08/30/2026

The power is built in. The complexity isn’t.

The Mag X Geo puts advanced locating, bore logging, and GPS mapping into one simple, intuitive system.

Pick it up and within seconds, you’re locating, logging, and mapping with confidence. The tools are ready when you need them and out of the way when you don’t.

Throughout Latin America, Tony D’Addio helps HDD crews put that power to work with dedicated locator sales and support.

Powerful enough for the toughest work. Simple enough for the entire crew.

Schedule a demo with Tony today.

Every mile has a purpose.For Charles, the road leads to early mornings, remote jobsites, and crews facing real challenge...
08/29/2026

Every mile has a purpose.

For Charles, the road leads to early mornings, remote jobsites, and crews facing real challenges. He shows up, puts the equipment to work, and stands beside the people who depend on it.

Because trust isn’t built through a sales pitch. It’s earned in the field.

Schedule a demo with Charles today.

I asked the sales team for photos from the road.Stefan sent:1. The Mag X Geo on the job2. Proof that it was hot3. Taco B...
08/28/2026

I asked the sales team for photos from the road.

Stefan sent:

1. The Mag X Geo on the job
2. Proof that it was hot
3. Taco Bell

He understood the assignment. Sort of.

When he isn’t locating the nearest Crunchwrap, Stefan is helping HDD crews put the right system to work.

Locate. Perspire. Live Más. 😂

Schedule a Demo Today!

A new runway at Grand Junction Regional Airport means rerouting roughly 6,000 feet of underground electric. MARK Constru...
08/28/2026

A new runway at Grand Junction Regional Airport means rerouting roughly 6,000 feet of underground electric. MARK Construction is handling the bores, including shots up to 1,000 feet through hard black shale.

Great to see a UMAG system being put to work on this one!

Address

5401 NW Beaver Drive
Johnston, IA
50131

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+15155050960

Website

Alerts

Be the first to know and let us send you an email when Underground Magnetics Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Underground Magnetics Inc:

Shortcuts

Share

Category