Taylor Press Products

Taylor Press Products We specialize in metal stampings, fabrication, welded assemblies and metal coating.

Located North of Austin in Jarrell, Texas, Taylor Press Products is an ISO 9001:2008 certified tier 1 and tier 2 supplier to the automotive and trucking industry.

06/16/2022

Monday - Thursday 5:30am - 4:00pm with possible overtime!
Apply in person

Must be 18+, one year experience.
Job Description: Verifies and keep records on outgoing shipments and prepares items for shipment: Compares identifying information and counts, weighs, or measures items outgoing shipments to verify information against bills of lading, purchase orders, invoices, orders or other records. Affix shipping labels and/or identifies shipping information on cartons. Assembles wooden or cardboard containers or selects pre assembled containers. Inserts items into containers. Examines shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages. Routes items to departments. Examines outgoing shipments to ensure shipments meet specifications. Operate lift truck or hank truck to move or hoist shipments from shipping and receiving platform to storage or work area.

Examines items for defects in materials, workmanship, and damage preparing for transit. Compares quantity of part number of items with other specifications to ensure completeness and accuracy of order. Inspects and measures for items for dimensional accuracy according to process instructions, blueprint, company policies and procedures, and other specifications, using precision measuring instruments and devices. Approves or rejects items, and records inspection and disposition information. May inspect outgoing products and materials. Will prepare inspection procedures/instructions for reference use in subsequent inspections, using data obtained from blueprints or customer specifications.

Qualifications: Must be able to perform basic arithmetic, reading and comprehension; writing and process instructions. Must have the ability to operate gages. Must have the ability to read and interpret blueprints. Must have the ability to understand basic use of and perform measurements using test equipment. Must be able to fallow process instructions. Must have the ability to understand and react to out of specification/control conditions and react with a corrective action resolution. Lift truck use. Testing and Training required. 90 day review.

Responsibility: Makes judgments and decisions on whether material or products are acceptable using quality criteria.

Freedom to Act: Can stop a shipment out of tolerance. Decides when to involve Quality or Plant Manager.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical punch press and equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements (occasionally lifting up to 50 lbs. Maximum) Lifting and reaching.

Job Type: Full-time

Pay: $16.00 - $18.00 per hour

09/14/2021

About us

TAYLOR PRESS PRODUCTS COMPANY
Metal Stampings, Welded Assemblies, Autodeposition Coating; Tool and Die shop.
www.taylor-products.com

Full Time Maintenance Technician, Monday - Thursday with overtime on Fridays' as needed. 5:30am - 4:00pm. Pay is negotiable depending on experience.

Duties: Maintain Punch Presses and Auxiliary and Facility Equipment

Reports To: Maintenance Supervisor

Job Description: Various duties to include maintaining punch presses, feeds, cradles, reels, straighters, auxillary equipment, forklifts, and any other machinery as needed. Reads work orders to determine scope of work needed. Fixing machinery, preventative maintenance, facility maintenance emergency work as needed and any other duties assigned by maintenance supervisor

Qualifications: Must be able to perform basic arithmetic, reading and comprehension; writing.

Must have the ability to operate a lift truck (includes driver’s license). Must be able to communicate with outside vendors, and tech reps. Must be able to work unsupervised to accomplish assigned tasks in a timely and efficient manner.

Responsibility: Provide a safe, clean, and hazardous free work environment at all times.

Freedom to Act: Can stop setup that is unsafe. Decides when to involve a Supervisor or Management.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical punch press and equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements - Frequently lifting up to 50 lbs. Maximum. Frequently lifting, reaching, and pulling. Occasionally stooping, kneeling, crouching, standing, and accommodation.

Job Type: Full-time

Pay: $15.00 - $18.00 per hour

09/14/2021

About us

TAYLOR PRESS PRODUCTS COMPANY
Metal Stampings, Welded Assemblies, Autodeposition Coating; Tool and Die shop.
www.taylor-products.com

9/14/2021: Full Time Maintenance Technician, Monday - Thursday with overtime on Fridays' as needed. 5:30am - 4:00pm. Pay is negotiable depending on experience.

Duties: Maintain Punch Presses and Auxiliary and Facility Equipment

Reports To: Maintenance Supervisor

Job Description: Various duties to include maintaining punch presses, feeds, cradles, reels, straighters, auxillary equipment, forklifts, and any other machinery as needed. Reads work orders to determine scope of work needed. Fixing machinery, preventative maintenance, facility maintenance emergency work as needed and any other duties assigned by maintenance supervisor

Qualifications: Must be able to perform basic arithmetic, reading and comprehension; writing.

Must have the ability to operate a lift truck (includes driver’s license). Must be able to communicate with outside vendors, and tech reps. Must be able to work unsupervised to accomplish assigned tasks in a timely and efficient manner.

Responsibility: Provide a safe, clean, and hazardous free work environment at all times.

Freedom to Act: Can stop setup that is unsafe. Decides when to involve a Supervisor or Management.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical punch press and equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements - Frequently lifting up to 50 lbs. Maximum. Frequently lifting, reaching, and pulling. Occasionally stooping, kneeling, crouching, standing, and accommodation.

Job Type: Full-time

email resume:
[Email hidden]
Pay: $15.00 - $18.00 per hour

09/14/2021

Job description

About us

TAYLOR PRESS PRODUCTS COMPANY
Metal Stampings, Welded Assemblies, Autodeposition Coating; Tool and Die shop.
www.taylor-products.com

Full Time Maintenance Technician, Monday - Thursday with overtime on Fridays' as needed. 5:30am - 4:00pm. Pay is negotiable depending on experience.

Duties: Maintain Punch Presses and Auxiliary and Facility Equipment

Reports To: Maintenance Supervisor

Job Description: Various duties to include maintaining punch presses, feeds, cradles, reels, straighters, auxillary equipment, forklifts, and any other machinery as needed. Reads work orders to determine scope of work needed. Fixing machinery, preventative maintenance, facility maintenance emergency work as needed and any other duties assigned by maintenance supervisor

Qualifications: Must be able to perform basic arithmetic, reading and comprehension; writing.

Must have the ability to operate a lift truck (includes driver’s license). Must be able to communicate with outside vendors, and tech reps. Must be able to work unsupervised to accomplish assigned tasks in a timely and efficient manner.

Responsibility: Provide a safe, clean, and hazardous free work environment at all times.

Freedom to Act: Can stop setup that is unsafe. Decides when to involve a Supervisor or Management.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical punch press and equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements - Frequently lifting up to 50 lbs. Maximum. Frequently lifting, reaching, and pulling. Occasionally stooping, kneeling, crouching, standing, and accommodation.

Job Type: Full-time

EMAIL RESUME:
[email protected]

Pay: $15.00 - $18.00 per hour

09/14/2021

About us

TAYLOR PRESS PRODUCTS COMPANY
Metal Stampings, Welded Assemblies, Autodeposition Coating; Tool and Die shop.
www.taylor-products.com

Full Time Maintenance Technician, Monday - Thursday with overtime on Fridays' as needed. 5:30am - 4:00pm. Pay is negotiable depending on experience.

Duties: Maintain Punch Presses and Auxiliary and Facility Equipment

Reports To: Maintenance Supervisor

Job Description: Various duties to include maintaining punch presses, feeds, cradles, reels, straighters, auxillary equipment, forklifts, and any other machinery as needed. Reads work orders to determine scope of work needed. Fixing machinery, preventative maintenance, facility maintenance emergency work as needed and any other duties assigned by maintenance supervisor

Qualifications: 18+, Must be able to perform basic arithmetic, reading and comprehension; writing.

Must have the ability to operate a lift truck (includes driver’s license). Must be able to communicate with outside vendors, and tech reps. Must be able to work unsupervised to accomplish assigned tasks in a timely and efficient manner.

Responsibility: Provide a safe, clean, and hazardous free work environment at all times.

Freedom to Act: Can stop setup that is unsafe. Decides when to involve a Supervisor or Management.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical punch press and equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements - Frequently lifting up to 50 lbs. Maximum. Frequently lifting, reaching, and pulling. Occasionally stooping, kneeling, crouching, standing, and accommodation.

Job Type: Full-time
EMAIL RESUME:
[email protected]

Pay: $15.00 - $18.00 per hour

06/09/2021

6/9/2021 Operator - No experience necessary! We do all training in house! Must be 18+.
Starts at $13.50 hr, Benefits (medical, dental, vision, 401k, 7 paid holidays, plus vacation)
4 DAY WORK WEEK!!! Monday - Thursday 5:30am - 4:00pm
**Overtime Available!!**
Single Hit / Automatic Machines
Operates machine equipped with tooling / die to punch, form, piece, trim or cut off metal stock, weld. Positions work pieces against fixtures or stops on machine die. Starts machine and observes operation to detect misalignment or malfunction. Inspects work pieces for conformance to specifications visually or by using gages or measurement and test equipment. Performs grinding operations; resistance welding operations and riveting operations on work pieces.
Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical parts on punch press/machine and auxiliary feed equipment. Exposure to oils and lubricants
Physical Demands: Medium strength requirements (occasionally lifting up to 50 lbs. Maximum)
Lifting and reaching
Standing
Job Type: Full-time
Salary: $13.50 /hour
I-35 N, Jarrell, TX 76537, United State

05/17/2021

Jarrell, Texas Immediate hire(s) needed. Pay depends on experience. Must be 18+
4 day workweek (Monday - Thursday 0530-1600), plus possible overtime, and benefits.

05/17/2021

May 17, 2021 - immediate hire needed (Jarrell)
Die, Press and Auxiliary Equipment Setup
1 year experience needed
Monday - Thursday 5:30am - 4:00pm with possible overtime.
Health, Vision, Dental, 401k, vacation, holidays!

Job Description: Sets up, adjusts, operates and tear-downs various metal fabricating dies/fixtures such as punch presses, feeds, cradles, reels, straighter, welders, grinder, saw, mill and sander. Reads job order to determine machine setup, production method and sequence of operations. Reads setup instructions for product specifications, and tooling instructions, such as feed rates. Selects, positions, and secures dies and fixtures onto machine using hand tools, and clamps and measurement instruments, such as rules, squares and gauges. Adjusts controls to set and regulate depth of ram stroke, adjustment rolls, speeds and feeds. Starts machine and observes operation to reposition work piece, change dies, or adjust machine settings for single or continuous operation and observe machines to verify conformance of die setup, press, and, feeding device to specifications. Starts coils thru reels, uncoiler and feeds and/or places metal blank in dies. Inspects and measures for items for dimensional accuracy according to process instructions, blueprint, company policies and procedures, and other specifications, using precision measuring instruments and devices. Approves or rejects items, and records inspection and disposition information.
Inspects work to verify conformance of die setup to specifications and documents all records.

Frequently exposed to loud noise levels
Proximity to moving and mechanical punch press and equipment.
Exposure to oils and lubricants

Physical Demands:
Medium strength requirements - Frequently lifting up to 50 lbs. Maximum
Frequently lifting, reaching, fi*****ng, near acuity, and depth perception
Occasionally stooping, kneeling, crouching, standing, and accommodation

05/05/2021

5/5/2021 JARRELL, TEXAS Taylor Press is seeking individuals to perform general labor work at the paintline. Looking to fill positions immediately.

Description: Hanging/removal of formed metal parts onto racks onto and from a conveyor system. Position also includes daily, light housekeeping chores such as sweeping and cleaning tasks. During occasional shutdowns, position requires willingness and ability to assist in cleaning of process equipment.

Position is full-time work. Schedule is Monday - Thursday from 5:30am-4:00pm (10 hour work day, 30 minute lunch)

Position requires use of safety equipment including: Safety glasses, steel toe boots, and hearing protection. Safety glasses are provided to new employees and ear plugs are provided on a daily basis.

No experience necessary, although experience in a similar environment (e.g. powder coat, e-coat) is a plus. Willingness to undergo lift truck/forklift training. MUST BE 18+

Ability to stand and walk for extended periods of time.
Ability to lift parts for extended periods of time.
Able to consistently lift, carry, and place 20 pounds.
Able to occasionally lift, carry, and place 40+ pounds.

APPLY IN PERSON, MONDAY - THURSDAY 8AM - 3:30PM.

03/18/2021

3/18/2021
Operator - No experience necessary! We do all training in house! Must be 18+.

Starts at $12.50 hr, Benefits (medical, dental, vision, 401k, 7 paid holidays, plus vacation)

4 DAY WORK WEEK!!! Monday - Thursday 5:30am - 4:00pm
**Overtime Available!!**

Single Hit / Automatic Machines

Operates machine equipped with tooling / die to punch, form, piece, trim or cut off metal stock, weld. Positions work pieces against fixtures or stops on machine die. Starts machine and observes operation to detect misalignment or malfunction. Inspects work pieces for conformance to specifications visually or by using gages or measurement and test equipment. Performs grinding operations; resistance welding operations and riveting operations on work pieces.

Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical parts on punch press/machine and auxiliary feed equipment. Exposure to oils and lubricants

Physical Demands: Medium strength requirements (occasionally lifting up to 50 lbs. Maximum)

Lifting and reaching

Standing

Job Type: Full-time

Salary: $12.50 /hour
I-35 N, Jarrell, TX 76537, United State

03/18/2021

Operator - No experience necessary! We do all training in house! Must be 18+.
Starts at $13.50 hr, Benefits (medical, dental, vision, 401k, 7 paid holidays, plus vacation)
4 DAY WORK WEEK!!! Monday - Thursday 5:30am - 4:00pm
**Overtime Available!!**
Single Hit / Automatic Machines
Operates machine equipped with tooling / die to punch, form, piece, trim or cut off metal stock, weld. Positions work pieces against fixtures or stops on machine die. Starts machine and observes operation to detect misalignment or malfunction. Inspects work pieces for conformance to specifications visually or by using gages or measurement and test equipment. Performs grinding operations; resistance welding operations and riveting operations on work pieces.
Work Environment: Frequently exposed to loud noise levels. Proximity to moving and mechanical parts on punch press/machine and auxiliary feed equipment. Exposure to oils and lubricants
Physical Demands: Medium strength requirements (occasionally lifting up to 50 lbs. Maximum)
Lifting and reaching
Standing
Job Type: Full-time
Salary: $13.50 /hour
I-35 N, Jarrell, TX 76537, United State

Address

13675 N Interstate 35
Jarrell, TX
76537

Opening Hours

Monday 6am - 4:30pm
Tuesday 6am - 4:30pm
Wednesday 6am - 4:30pm
Thursday 6am - 4:30pm

Telephone

+15127465556

Website

Alerts

Be the first to know and let us send you an email when Taylor Press Products posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category