Equipment Options Direct

12/09/2025

Call Heather for a great price on foam. We ship several different brands from 20+ locations across the U.S. 855.777.2955 🙋🏽‍♀️🛢️🚛

11/26/2025

Happy Thanksgiving to all of our friends 🍗🍛💕

11/14/2025

great tip from our friends at Quadrant Performance Materials!

Sprinkler heads are one of those small jobsite details that can cause big headaches if overlooked. When spray foam or coating material accidentally covers or clogs a sprinkler head, it can lead to costly cleanup, delayed inspections, or even failed safety tests. 🚫

A simple, effective way to prevent that? Cover each sprinkler head with a disposable cup, like a red Solo cup, and secure it with a small piece of tape. This quick step helps shield the fittings from foam, dust, or debris during prep and spraying.

✅ Why it matters:
- Prevents foam or coating buildup that can damage or block sprinkler heads
- Saves valuable time during both setup and cleanup
- Keeps your work area code-compliant and inspection-ready
- Shows attention to detail that reflects quality in your work

10/22/2025

Great information from Quadrant Performance Materials

Your generator is the backbone of your spray foam rig as without it, nothing else runs. When it starts sputtering or cutting off, it’s a red flag that small issues are building up. If ignored, these problems can bring your entire job to a halt and cost you valuable time and money.
Some of common causes are dirty fuel that clogs injectors, old/low quality oil that reduces performance, and clogged air filters.

✅ Prevention Tips:

- Change oil on schedule to keep the engine lubricated and running efficiently
- Inspect and clean air filters to prevent choking airflow
- Always use fresh, clean fuel to avoid contamination

⚠️ Consequences if Ignored:

- Loss of power to your rig mid-job
- Interrupted spray application, leading to wasted material
- Costly downtime while troubleshooting or waiting for repairs

A well-maintained generator means steady power, uninterrupted spraying, and fewer headaches on the jobsite.

10/22/2025

EnviroSeal from Quadrant Performance Materials is now recognized with a 1-hour fire rating for metal building systems when paired with DC-315.

That means simpler installs, lower costs, and stronger fire safety — all in one solution.

Plus you'll still have all the applicator benefits of EnviroSeal products:
✅ Easy to Spray
✅ Superior Adhesion
✅ Year Round Formulations

Learn more at: https://bit.ly/1hourwall

10/07/2025

Fast pick up in certain areas or easy delivery! Call 855.777.2955

09/15/2025

In keeping with this week's training classes, here is our video of Tim doing a classic pump rebuild. This is a valuable video for any PMC spray foam machine owner, technician or distributor. Enjoy! Watch the full video here: https://youtu.be/OmZqBMs15X0
For more tips and videos subscribe to our YouTube channel: https://www.youtube.com/

09/05/2025

Hose leaks at fittings may seem minor, but they can quickly escalate into serious issues on the job. A loose or worn fitting can lead to material leaking out, creating a mess and wasting expensive product. These are ways we recommend preventing leaks:

🔍 Inspect fittings before each job: Loose, worn, or overtightened fittings are a common cause of material leaks and off-ratio foam.
🛠️ Tighten and replace as needed: Make sure all seals are in good condition, and replace any damaged or fatigued fittings.
✅ Pressure test before spraying: A quick pre-spray check can prevent mess, wasted material, and dangerous pressure blowouts.

Take that extra time to look out for any leaks. Those minutes of prevention can save hours of cleanup and a costly waste of material.

09/05/2025

Proper drum temperature is one of the biggest factors affecting quality, consistency, and yield. Both the A-side and B-side must be stored and conditioned at the same temperature to ensure accurate mixing and proper chemical reaction.

Key Practices include:

🛠️ Use Drum Blankets or Heaters – Maintain steady temperatures even in cold conditions. Slow, even heating prevents cold spots or overheating that can affect foam expansion and adhesion.
🌡️ Check Temperatures Before Spraying – Use an infrared thermometer on both drums. Keeping the temperature as close to each other prevents off-ratio spraying and wasted material.
🛢️ Condition Drums in the Rig – Recirculate material if your rig allows it, store drums in an insulated or heated rig box, and keep bungs sealed. Maintain temperature even during breaks for consistent performance throughout the day.

✅ Bottom Line: Consistent, balanced drum temperatures = smoother spraying, better foam quality, and more yield per set.

09/05/2025

Call Heather at 855.777.2955 for a foam quote today!

09/05/2025

Call Heather at 855.777.2955 and ask about true 1000 lb sets of quality foam.

08/15/2025

Check out this great looking trailer. We are getting ready to insulate it and build it out for a nice long career in Spray Foam Insulation. What equipment would you put in this rig? Graco? Binks? PMC?