Red-D-Arc

Red-D-Arc We rent welders, positioners, generators, blast cleaners, plasma cutters, pipe rollers, manipulators and more

Join Red-D-Arc at the Shutdowns Turnarounds Superconference in Houston! We offer the speed and flexibility your project ...
04/23/2026

Join Red-D-Arc at the Shutdowns Turnarounds Superconference in Houston! We offer the speed and flexibility your project demands with rental, lease, and purchase options tailored to your scale.

Our team of knowledgeable product specialists and extensive fleet of equipment help you make quality repairs while remaining on schedule. We provide the essential gear for a seamless turnaround, including Extreme-Duty™ welders, induction heat treating and automated orbital solutions, industrial power generation and distribution, dry ice blasting equipment, and more.

Stop by our booth in Salon C to see how our turnkey rental solutions and technical expertise can support your next shutdown. We look forward to meeting you and discussing how we can keep your project on track.

🗓️ Date: May 6–7, 2026
📍 Location: Hilton Houston North | Houston, TX

For National Welding Month, we’re celebrating the creativity and craftsmanship found across our organization. This week,...
04/22/2026

For National Welding Month, we’re celebrating the creativity and craftsmanship found across our organization. This week, we’re featuring Lead Marketing Associate, Chelsea Mizzi, and a stainless steel project that truly took flight ✈️ while she was honing her craft.

In this project, Chelsea demonstrates the precision required to move from raw sheet metal to a complex 3D model, a process that challenges both the hands and the mind.

✨ Fabrication: Every individual piece of the airplane was traced and hand-cut using a grinder.
✨ The Challenge: Navigating tiny, tricky welds on a small-scale model tested Chelsea's ability to manage heat and understand how the metal behaves.
✨ Assembly: Chelsea used TIG welding to fuse the stainless steel components together, requiring a steady hand and extreme focus.
✨ The Takeaway: This build was a ""fun test of patience and precision,"" proving that fabrication is as much about the preparation as it is the final weld.

Learning to weld is about more than just joining metal. It’s about the grit to see a complex project through and the creativity to build something from nothing. Happy National Welding Month!

This Earth Day, we’re focusing on practical ways to reduce waste and work more sustainably. Red-D-Arc helps keep equipme...
04/22/2026

This Earth Day, we’re focusing on practical ways to reduce waste and work more sustainably. Red-D-Arc helps keep equipment out of landfills by offering flexible options to rent, lease, or buy used, while prioritizing efficiency across our fleet:

🌍 Extending Equipment Life: Our technicians provide expert maintenance to maximize the lifespan of every machine.

🌍 Reducing Emissions: We regularly add new, energy-efficient models to our fleet to help lower your environmental footprint.

🌍 Cutting Material Waste: Our automation solutions improve weld consistency, significantly reducing scrap and rework.

With over 50 service centers across North America, we aim to get the right equipment to your site quickly and efficiently. Small changes in how we work today can help build a cleaner, more sustainable tomorrow.

The Steel Erectors Association of America (SEAA) is hosting its 2026 National Convention & Trade Show from May 5-8 at th...
04/21/2026

The Steel Erectors Association of America (SEAA) is hosting its 2026 National Convention & Trade Show from May 5-8 at the Sheraton Kansas City at Crown Center in Kansas City, Missouri!

If you'll be at the show, stop by and visit Red-D-Arc at Booth #53 to find out more about our comprehensive equipment offer for steel erectors, including engine-driven welders, multi-process units, and wire feeders.

Meet with members of the Red-D-Arc team, including our welding specialists, to learn more about our flexible rental, lease, and purchase options designed to keep your projects on schedule and under budget.

Can't make it to Kansas City but want to learn more? Contact us today! https://www.red-d-arc.com/en-us/contact-us

Red-D-Arc provides dry ice blasting equipment and solutions to tackle tough cleaning, industrial maintenance, and surfac...
04/21/2026

Red-D-Arc provides dry ice blasting equipment and solutions to tackle tough cleaning, industrial maintenance, and surface preparation jobs.

The Benefits:
❄️ Zero Residue: No secondary waste to clean up; the pellets simply evaporate.
❄️ Surface Safe: Non-abrasive and non-conductive; perfect for delicate machinery.
❄️ Maximum Uptime: Clean your equipment in-place without a full teardown.

With rental, lease, and purchase options, we make it simple to get the right dry ice blasting system for your needs.

Learn more here: https://www.red-d-arc.com/en-US/rda-equipment-nav/equipment/dry-ice-blasting/dry-ice-blasting-machines/5637190392.c

Headed to the NCPWB Technical Conference? Don't miss Technical Presentation  #8 featuring Bill Pharmer, Senior Director ...
04/20/2026

Headed to the NCPWB Technical Conference? Don't miss Technical Presentation #8 featuring Bill Pharmer, Senior Director at Airgas. Bill will dive into the chemical properties and fundamental roles of shielding gases to help you optimize arc stability and weld integrity in GMAW, GTAW, and FCAW processes.

When: Tuesday, April 28 | 11:15 am – 12:00 pm

After the session, visit the Red-D-Arc and Airgas teams at Booth #19 to discuss how our combined equipment and gas solutions can optimize your next project.

📍 Where: Hyatt Regency Hill Country Resort, TX
📅 When: April 26–28, 2026

Register for the conference here: https://mcaaevents.org/ncpwb-conference/

Airgas

04/20/2026

Take your heat treatment precision to the next level with Cooperheat resistance heating technologies available at Red-D-Arc. By combining decades of expertise with the most advanced equipment, we give you total control over your project specifications and schedule.

The innovative Cooper 8 controller—a programmer, controller, and digital recorder all combined into one unit—works in conjunction with the Cooperheat 70kVA Heat Treatment Module and is the key to mastering your heat treatment process.

• Extreme Versatility: Seamlessly integrates with standard resistance consoles or induction heating power sources.

• Precision Monitoring: Features a six-channel programmer with an additional six channels for monitoring thermocouples.

• Smart Data Management: Sophisticated programming allows you to download data for analysis and print temperature charts.

• Advanced Control: Offers intuitive local or remote monitoring to run six independent preheats or post-weld treatments simultaneously.

By bringing this process in-house, you can dramatically reduce outsourcing costs and maintain strict control over your own schedule.

To learn more about our full lineup of Cooperheat resistance heating equipment, visit our website: https://www.red-d-arc.com/en-us/rda-equipment-nav/equipment/heat-treating/resistance-heating/5637190363.c

Cooperheat Equipment Ltd.

04/17/2026

Discover how to streamline your welding workflow by utilizing the Sub Program and playlist features on the BotX™ XSR. Watch as we demonstrate how to link multiple programs together and run them in sequence to maximize your machine's efficiency.

To learn more about the BotX XSR, visit our website: botxwelder.com

If you’ll be attending NASCC: The Steel Conference next week, remember to stop by the Airgas Booth  #3152 to talk shop w...
04/16/2026

If you’ll be attending NASCC: The Steel Conference next week, remember to stop by the Airgas Booth #3152 to talk shop with the Airgas and Red-D-Arc teams!

Whether you’re looking to automate your workflow or optimize your welding operations, our experts are ready to help you solve your toughest steel fabrication challenges.

Featured on display: The BotX™ collaborative robot arm, featuring a magnetic base and equipped with optional MIG or plasma torch configurations to handle your most demanding tasks.

📍 Where: Georgia World Congress Center | Booth #3152
📅 When: April 22–24, 2026

See how Airgas and Red-D-Arc can boost your productivity and efficiency. We’ll see you in Atlanta!

Airgas

Huge success in Sacramento! The Red-D-Arc and Airgas teams joined forces last month for a powerhouse Used Equipment Sale...
04/16/2026

Huge success in Sacramento! The Red-D-Arc and Airgas teams joined forces last month for a powerhouse Used Equipment Sale & Demo Days event!

Not only did we have a great turnout of customers, but we also made a real difference in our local community. Together, we collected and donated 200 lbs of food to the Sacramento Food Bank & Family Services!

A massive shoutout to everyone who organized and executed this event.

Want to catch our next one? Visit our website to find out when a Red-D-Arc Used Equipment Sale is coming to a city near you: www.red-d-arc.com/en-ca/company/events

Airgas Sacramento Food Bank & Family Services

You're invited to our used welding equipment sale and demo days event in Seattle, Washington from April 28-29!⚙️ Shop a ...
04/15/2026

You're invited to our used welding equipment sale and demo days event in Seattle, Washington from April 28-29!

⚙️ Shop a wide selection of used equipment
🏷️ Score exclusive event-only pricing
✨ See live demos of the BotX™ cobot welding system, as well as plasma cutting & dry ice blasting equipment
🥪 Enjoy a complimentary lunch while you shop (11am - 1pm)
🥫 Bring a non-perishable donation to support our community food drive, Northwest Harvest

Where? Red-D-Arc: 4401 Airport Way S. Seattle, WA 98108
When? April 28-29 from 9am - 2pm

Don't forget! You're invited to our used welding equipment sale and demo days event in Denver, Colorado from April 15-16...
04/14/2026

Don't forget! You're invited to our used welding equipment sale and demo days event in Denver, Colorado from April 15-16!

⚙️ Shop a wide selection of used equipment
🏷️ Score exclusive event-only pricing
✨ See live demos of cutting-edge technology
🥪 Enjoy a complimentary lunch while you shop (11am - 1pm)
🥫 Bring a non-perishable donation to support our community food drive

Where? Red-D-Arc: 4675 Joliet St, Denver, CO 80239
When? April 15-16 from 9am - 2pm

Hurricane Dorian expected to be a category 4 storm by the time it makes landfall on Sunday night or Monday morning. If y...
08/29/2019

Hurricane Dorian expected to be a category 4 storm by the time it makes landfall on Sunday night or Monday morning. If you need to get backup power in place ahead of time give us a call. https://buff.ly/2D98ufS

Address

10310 Alta Drive
Jacksonville, FL
32226

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm

Telephone

(904) 379-8194

Alerts

Be the first to know and let us send you an email when Red-D-Arc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Red-D-Arc:

Share