Chefs Haven Restaurant Supply

Chefs Haven Restaurant Supply Chef’s Haven, founded in 2018, provides top commercial kitchen equipment and trusted restaurant supplies worldwide.

We offer premium brands, competitive prices, and exceptional service, supporting your culinary journey from planning to delivery.

Every primal you send out comes back with someone else's markup on it. 💸🪚Break them down in house instead. A 116 inch bl...
09/15/2026

Every primal you send out comes back with someone else's markup on it. 💸🪚

Break them down in house instead. A 116 inch blade with 13.4 by 16.7 inch clearance cuts through meat and bone, and the whole unit is stainless and hose down washable, so cleanup is never the reason it sits unused. 💧

In house butchery starts at $6,500.00 on standard 115 volt power.

Run your numbers with us at chefshavenhtx.com or in the showroom. 🧮

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

Forgot to marinate last night? You just got 20 minutes back. ⏱️🙌Vacuum tumbling drives marinade into 55 pounds of protei...
09/14/2026

Forgot to marinate last night? You just got 20 minutes back. ⏱️🙌

Vacuum tumbling drives marinade into 55 pounds of protein or vegetables in under 20 minutes, so a same day special stops being impossible and overnight planning stops dictating your menu. 9.4 gallons per minute pump. 🌀

That flexibility costs $2,388.44.

Rethink your prep timeline at chefshavenhtx.com or see it tumble in Houston. 👀

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

Big product needs a big blade. 🔪📏13 inches of German stainless steel, gear driven, taking large format cuts and full che...
09/13/2026

Big product needs a big blade. 🔪📏

13 inches of German stainless steel, gear driven, taking large format cuts and full cheese blocks in stride. Up to one and a half inch thickness, with a built in sharpener keeping every pass clean from open to close. ✅

Priced at $2,278.39.

Bring your biggest cut and test it, chefshavenhtx.com or come by the showroom. 🧪

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

Gear driven, because belts slip when the rush hits. ⚙️🔥This 12 inch German stainless blade holds its speed straight thro...
09/12/2026

Gear driven, because belts slip when the rush hits. ⚙️🔥

This 12 inch German stainless blade holds its speed straight through a full lunch service, and it cuts up to one and a half inches thick, so it is not confined to thin work. Built for continuous duty, not occasional use. 🎯

Yours at $1,929.78.

Feel the difference in person, chefshavenhtx.com or our Houston showroom. 👋

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

Grinding and mixing as two separate jobs is two separate labor costs. 🔄👷This does both in one pass. A 110 pound hopper, ...
09/11/2026

Grinding and mixing as two separate jobs is two separate labor costs. 🔄👷

This does both in one pass. A 110 pound hopper, 212 pound feet of torque for mixing and 1,094 for grinding, pedal operated so your hands stay on the product and never near the auger. Magnetic interlock on the lid. 🛡️

The flagship of the Pro-Cut line at $9,800.00.

Serious about volume? Talk to us at chefshavenhtx.com or on the showroom floor. 🏭

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

Counter space is the most expensive real estate you own. 📏🏠So do not hand any of it to a grinder. This five horsepower n...
09/10/2026

Counter space is the most expensive real estate you own. 📏🏠

So do not hand any of it to a grinder. This five horsepower number 32 arrives on its own stainless steel stand, freeing your bench completely while pushing 3,840 pounds an hour on the coarse plate. 💪

Floor standing power for $4,500.00.

Take your counters back, order at chefshavenhtx.com or come measure it in person. 📐

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

No three phase in the building? You are not stuck. 🔌⚡Plenty of older Houston kitchens are single phase only, and that us...
09/09/2026

No three phase in the building? You are not stuck. 🔌⚡

Plenty of older Houston kitchens are single phase only, and that usually rules out the heavy grinders. Not this one. Three horsepower on single phase 220 volt, 3,300 pounds an hour on the coarse plate, no electrical contractor required. 🏗️

Single phase capability runs $3,800.00.

Check your panel, then check chefshavenhtx.com or ring the showroom. ☎️

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

One morning of grinding should cover the whole week. 📅🥩The number 32 hub does 3,300 pounds an hour on the three eighths ...
09/08/2026

One morning of grinding should cover the whole week. 📅🥩

The number 32 hub does 3,300 pounds an hour on the three eighths inch plate, so a full week of mise gets knocked out before lunch. Three horsepower on three phase, with a safety deflector and motor protector standard. ⚙️

Production capacity for $3,400.00.

Ready to batch bigger? Head to chefshavenhtx.com or visit the showroom. 🏪

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

A burned out motor costs more than the machine that prevents it. 🔧⚠️Two horsepower on 220 volt means this number 22 neve...
09/07/2026

A burned out motor costs more than the machine that prevents it. 🔧⚠️

Two horsepower on 220 volt means this number 22 never strains, and the built in motor protector cuts power before an overload becomes a repair bill and three days of downtime. 1,800 pounds an hour on the coarse plate. 💪

Power and protection together for $2,219.46.

Save yourself the service call, order at chefshavenhtx.com or call us. ☎️

📍 6345 Skyline Dr, Houston, Texas
📞 832-727-9082

09/07/2026

To those who show up, give their best, and keep moving forward, this day belongs to you 🇺🇸🛠️

Happy Labor Day from all of us at Chef’s Haven! We see your hard work and dedication every single day.

Take a well-deserved break and enjoy the holiday!

Address

6345 SKYLINE Drive Houston, TX 77057
Houston, TX

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Telephone

+18327279082

Website

Alerts

Be the first to know and let us send you an email when Chefs Haven Restaurant Supply posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Chefs Haven Restaurant Supply:

Shortcuts

Share

Category