ICP DAS USA, Inc.

ICP DAS USA, Inc. Data Acquisition Made Easy!

Meet the M-7017: an 8-channel voltage and current input module built for versatility and seamless integration. https://l...
07/10/2025

Meet the M-7017: an 8-channel voltage and current input module built for versatility and seamless integration. https://lnkd.in/gJUAunVh
With support for both Modbus RTU and DCON protocols, this module effortlessly connects with SCADA/HMI software and PLCs.
🛠️ 8 Differential Analog Inputs
💡 Power & Communication LEDs
🔗 Modbus + DCON Compatibility
Ready to upgrade your analog input game?

Data Sheet: https://lnkd.in/g5izFH42
User Manual: https://lnkd.in/gx2K2PYr
hashtag hashtag hashtag hashtag hashtag hashtag hashtag hashtag

Engineering Insights on Demand: Why isn't Wi-Fi commonly used in industrial automation—even when latency isn't the issue...
07/09/2025

Engineering Insights on Demand: Why isn't Wi-Fi commonly used in industrial automation—even when latency isn't the issue?

1️⃣ Reliability & Interference: Industrial environments are filled with RF noise from motors and welders. Wi-Fi struggles with packet loss and jitter, making it unreliable.
2️⃣ Determinism & Real-Time Control: Protocols like PROFINET IRT and EtherCAT need strict timing. Wi-Fi can’t guarantee consistent delivery, which breaks synchronization.
When precision matters, wired always wins.

hashtag hashtag hashtag hashtag hashtag hashtag hashtag

Tech Tip: Need both Modbus TCP and RTU masters to communicate with the same Modbus RTU slave devices? The uPAC-7186EX-MT...
07/08/2025

Tech Tip: Need both Modbus TCP and RTU masters to communicate with the same Modbus RTU slave devices? The uPAC-7186EX-MTCP enables seamless data sharing across protocols using custom firmware and a simple Ethernet switch setup.
Product: https://lnkd.in/g5cXBB7m
Data sheet: https://lnkd.in/gzjNpAUA
Quick Start Guide: https://lnkd.in/gzjNpAUA

hashtag hashtag hashtag hashtag hashtag hashtag

⚠️New Product Alert⚠️New to ICP DAS USA, the Win-GRAF XP-9000-IoT series are Windows 10 IoT Enterprise based PACs that c...
11/07/2024

⚠️New Product Alert⚠️

New to ICP DAS USA, the Win-GRAF XP-9000-IoT series are Windows 10 IoT Enterprise based PACs that combine computing, I/O, and operator interface into a single unit, and provide the perfect solution for integrating HMI, data acquisition and control in an individual PAC. They are equipped with an Intel E3845 CPU, 1/3/7 I/O expansion slots and a variety of connectives including dual Gigabit Ethernet, VGA , USB port, RS-232 and RS-485 interface. Local I/O slots are available to I-9K and I-97K series I/O modules and remote I/O expansions are available with Ethernet and RS-485 I/O modules.

XP-9188-IoT: https://www.icpdas-usa.com/xp_9188_iot.html

XP-9388-IoT: https://www.icpdas-usa.com/xp_9388_iot.html

XP-9788-IoT: https://www.icpdas-usa.com/xp_9788_iot.html

To request a quote or product support, call us at 1-346-292-9998 or visit our website: https://www.icpdas-usa.com/contact_us.php

If you missed our webinar, don't worry, here is the link:https://lnkd.in/dqZ-JbT9In this webinar you'll learn:IoTModbus ...
05/02/2023

If you missed our webinar, don't worry, here is the link:
https://lnkd.in/dqZ-JbT9

In this webinar you'll learn:
IoT
Modbus Data Acquisition Systems
Remote Monitoring
Modbus Leak Detection Systems Application
Modbus IoT Data Acquisition with Indusoft SCADA Software

Reminder ⏰🔔Our free Modbus IoT Data Acquisition SystemsWebinar is tomorrow! 10 AM PST.Register ➡️ https://lnkd.in/g33ZRR...
04/26/2023

Reminder ⏰🔔
Our free
Modbus IoT Data Acquisition Systems
Webinar is tomorrow! 10 AM PST.

Register ➡️
https://lnkd.in/g33ZRRiW

DeviceNet supports a wide range of industrial devices, commonly used in industries such as automotive manufacturing, foo...
04/20/2023

DeviceNet supports a wide range of industrial devices, commonly used in industries such as automotive manufacturing, food and beverage, and packaging. It is a popular protocol because it is easy to set up and configure, and it can support a large number of devices on a single network. In addition, DeviceNet supports both cyclic and acyclic messaging, allowing devices to communicate in real time and providing more flexible communication options.

M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer) for remote meter reading and control of ut...
04/20/2023

M-Bus (Meter-Bus) is a European standard (EN 13757-2 physical and link layer) for remote meter reading and control of utility meters such as electricity, gas, water, and heat meters. It is a communication protocol designed for robust and reliable data exchange between meters and data acquisition systems.

M-Bus uses a two-wire communication system with a maximum cable length of 1.2 km and a data rate of up to 9600 baud. It supports both wired and wireless communication, making it a flexible and adaptable solution for various metering applications. M-Bus also has a low power consumption, which is ideal for battery-powered meters.

Distributed Network Protocol 3 (DNP3) is a set of communications protocols used between components in process automation...
04/14/2023

Distributed Network Protocol 3 (DNP3) is a set of communications protocols used between components in process automation systems. Its main use is in utilities such as electric and water companies. It was developed for communications between various types of data acquisition and control equipment. It plays a crucial role in SCADA systems. It is primarily used for communications between a master station and Remote Terminal Units (RTUs) or Intelligent Electronic Devices (IEDs).

Gateways and converters offer data communication interoperability and network interconnection. They allow for connectin...
04/06/2023

Gateways and converters offer data communication interoperability and network interconnection. They allow for connecting and the exchanging of data with different automation devices as they facilitate communication between different networks or protocols. Most of our gateways convert fieldbus communication back to Modbus RTU or Modbus TCP.

Our gateways are easy to set up and use. Most are configurable over a web browser and no programming is required. We offer configuration services if you’d like us to set the IP address and other settings before we ship.

In this diagram here you can see at the top left there’s a PC that has our PCI cards that enable communication over CAN Bus. At the top right you can see there’s a SCADA system running on a notebook computer which has communication to the CAN network through our I-7565 USB to CAN converter. Our I-7532 CAN Bridge device connects a high-speed CAN network to a mid-speed CAN network. I-7531 CAN repeaters help extend the communication distance and improve the signal. I-7530 CAN to RS-232 converters allow a PLC that controls a motor into the network. An I-2534 CAN Switch networks together different CAN networks that communicate over varying speeds. I-7540D-WF CAN to Wi-Fi gateways allow for wireless communication to CAN equipment. CAN Remote I/O are connected to sensors and actuators. CAN communication cards in our programmable automation controllers allow for programs developed with Visual Studio.NET and Linux to control and monitor CAN devices.

Address

9804 Whithorn Drive
Houston, TX
77095

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when ICP DAS USA, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category