BUILT with FOAM

BUILT with FOAM Custom Foam Shower Bases -Order today & Made today! As former contractors, we know what you need to make a job successful.
(1)

Built With Foam is proud to be a US Veteran & minority owned, zero landfill business based in Houston, Texas. Our team has a combined 90+ years of experience in the building trades including tile installation, high-end homes, historic properties, and commercial spaces. Over our decades in the industry we’ve witnessed the evolution and prevalence of foam products on the jobsite. Not only is custom

foam cheaper as a building material, it can cut down on labor, substantially speeds projects, and can remove a lot of the typical hurdles faced daily. We’ve put our experience into designing and manufacturing quality products which can make the lives of our fellow tradesmen and tradeswomen much easier. Our exclusive Tub Arch™, Shower Arch™, Tub Dome™, Shower Dome™, products eliminate the need for complicated, time consuming, and expensive framing along with the usual jobsite “discussions” that inevitably happen. We’ve all been through those too many times and is why we can comfortably say there is no better way to deliver a quick, custom sized, low cost installation than to use Built With Foam. Check out our patented sink basins and undermount sink basins which were designed to take the tedious and time-consuming labor out of the sink building process. All you need to do is add the waterproofing of your choice then you’re ready for tile which is what you do best. Foam is not limited to the items on our menu. Unleash your imagination to find new ways foam can be used to expand what you can do. Contact us today if you are interested in learning more about building with foam, either as a DIYer or licensed tradesperson.

MR Custom Tile started with great prep work to get to these results.
06/15/2026

MR Custom Tile started with great prep work to get to these results.

Join the webinar TODAY ! Learn why substrate prep and flatness is so important.
06/11/2026

Join the webinar TODAY !
Learn why substrate prep and flatness is so important.

Join us tomorrow for a free webinar about the critical role substrate preparation plays in preventing installation failures. 🛠️
You will learn:
✨Why “flat” substrates are often more important than “level”
✨How industry standards define acceptable tolerances
✨How the right preparation materials and crack isolation methods help ensure long-term performance
Thanks to our host, Sika USA !
Learn more and register at https://tinyurl.com/nz6apuan

06/04/2026

The NTCA now has Bilingual local training available !!

06/02/2026

Don't miss these upcoming FREE trainings! 🛠️
📌Foundations of Wet Areas: June 2 in Scarborough, Maine; June 3 in Derry, N.H.; June 10 in Moraine, Ohio
📌Tile Technology–Adhesives: June 2 in El Paso, Texas; June 4 in Saugus, Mass.; June 9 in Lexington, Ky.
📌Substrate Prep & Industry Standards Large Format Tile: June 4 in Kansas City, Mo., and Albuquerque, N.M.
📌Regional Interior Installation of GPTP/Slab: June 11 in Urbandale, Iowa, and Fullerton, Calif.
📌Tile Technology–Membranes: June 11 in Brooklyn Heights, Ohio

06/02/2026

Free learning (and possible donuts)

05/28/2026

Prep Hard and Tile Easy

04/22/2026

Question for the installers who form their own drypack shower floors - Would you use a phone app with the following features?

After entering the perimeter measurements, drain location, and desired perimeter height you'd get the following information;

1- The app tells you if you can have a level perimeter as is.
2- If you can't have a level perimeter you can drag the point drain across your phone screen with your finger until it turns from red to green indicating a level perimeter is now possible.
3- The app tells you the measurements of the new drain location so you can see of there are joists in the way.
4- If you cannot have a level perimeter it tells you how much and where to adjust the perimeter to stay within the required 2% to 4% slope.
5- Tells you how much drypack you need for bonded or unbonded drypack both as bagged or loose sand + cement.
6- Works for both point drains and linear drains.
7- Tells you the minimum perimeter height for curbless showers.

I've already filed for the patent ;)

We're always looking to improve our methods to make your lives easier.
04/20/2026

We're always looking to improve our methods to make your lives easier.

FloFX square flanges with a perfect fit.

Address

1237 Oxford Street
Houston, TX
77008

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+17134692554

Website

Alerts

Be the first to know and let us send you an email when BUILT with FOAM posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to BUILT with FOAM:

Shortcuts

Share

Category