Mountain Valley Metal Art

Mountain Valley Metal Art Currently a side-project out of our garage. Full design capability. CNC plasma cutting up to 32" x 48". Work mostly with 16ga steel. That's my downfall.

I started my first job in design engineering in early 2003. By the middle of 2004 I was infatuated with CNC routers and plasma cutters. At the time there wasn't a lot of information on the internet about these machines. But that didn't stop me from thinking I could build one. I mean, why couldn't a 23 year old build a precise machine with nothing but a few cheap hand tools. I still have the three

stepper motors I ordered from Ebay in my basement. Needless to say, I never got any further than that. Like most people ... life happened. And every few years I would start researching, then stop again. Nearly 18 years later, I was finally able to pursue my dream with the support of my wife. Me working fulltime as an engineer, her working fulltime as a nurse, having two boys ... and working out of our garage in all of the free time we have ... it's been a slow-developing project. But it's a project we can work on together. Over the last several years I've had the opportunity to work with plastic injection molded parts, cast parts, sheet metal, honeycomb panels, weed trimmer designs, leaf blowers, aircraft completion and most recently electrical and wire routing with all of their brackets and supports. But learning the CNC programming side, the cutting and finishing, and everything in between has been an eye-opening experience. Going back to college does not interest me in the least ... but continuing to learn definitely does. And I waste a lot of time 'planning' instead of working. There are certain things that really interest me, other's don't. I tend to be very meticulous (and maybe a little OCD) so it's likely you won't find our shop loaded with a ton of things. Our goal is unique. Somewhere between modern and modern rustic.

Custom Order - 36" x 4.5"
09/29/2021

Custom Order - 36" x 4.5"

09/29/2021
Custom Order - 10" x 28"
09/29/2021

Custom Order - 10" x 28"

10% off orders $50 or more.Now thru Labor Day.
09/04/2021

10% off orders $50 or more.
Now thru Labor Day.

You searched for: MtnValleyMetalArt! Discover the unique items that MtnValleyMetalArt creates. At Etsy, we pride ourselves on our global community of sellers. Each Etsy seller helps contribute to a global marketplace of creative goods. By supporting MtnValleyMetalArt, you’re supporting a small bus...

07/07/2021

Always Kiss Me Goodnight wall hanging cut by CNC from 16ga steel. Approximately 32 x 5. Raw steel with clear coat for protection.

06/20/2021

Vintage Warranted Superior Handsaw cut by CNC. The saw shown is the actual saw youll receive. Each one is unique in its own way so we prefer to list each one individually. The blades have been removed, cut by cnc, sprayed with a satin clearcoat and reassembled. This particular saw also includes

Address

Hot Springs, AR

Website

Alerts

Be the first to know and let us send you an email when Mountain Valley Metal Art posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mountain Valley Metal Art:

Shortcuts

Share

Category