Huffman's Fab

Directions Website Contact the business

Huffman's Fab One stop shop for your off-road needs. We do everything from simple parts installation to full builds

Built with a purpose!
10/06/2026

Built with a purpose!

Steady digging in the shop, knocking out axles and accessories.
10/01/2026

Steady digging in the shop, knocking out axles and accessories.

09/30/2026

Full shop. Steady hands.. Let's get to work.

09/23/2026

From raw steel to trail ready strength.
Every cut, weld, and measurement matters when you’re building an axle housing made to perform. ⚙️🔥

A super clean 1st gen 4runner with a diesel came in on leaf springs and some mods already performed like spring over kit...
09/21/2026

A super clean 1st gen 4runner with a diesel came in on leaf springs and some mods already performed like spring over kit and an axle truss, but was looking for a better ride and performance. We did a trailgear three link front kit using new links paired with trailgear creeper joints, fully plated frame using a custom frame side panhard mount paired with a custom track bar, shock hoops with fox coilovers along with outbound axle side shock mounts, transmission mount, reworked the exhaust, shock hoops and shock mounts along with a laundry list of small tasks to get this rig performing better than it was.

Low quality phone pictures, but I want to say thank you to all of our customers keeping us busy in the shop with builds ...
09/16/2026

Low quality phone pictures, but I want to say thank you to all of our customers keeping us busy in the shop with builds and axles rolling out the door! Side note, we will do better on consistent posts.

Today, we pause to remember the lives lost, honor the heroes who answered the call, and stand with the families forever ...
09/11/2026

Today, we pause to remember the lives lost, honor the heroes who answered the call, and stand with the families forever changed by September 11, 2001. We also want to honor the unity our country showed in the face of that devastating attack.

We will never forget. 🇺🇸

Man what a transformation we performed on this car. Started as a nice Jesse Haines goat built car and we personalized it...
06/05/2026

Man what a transformation we performed on this car. Started as a nice Jesse Haines goat built car and we personalized it to suit the customer with a makeover. Lots of subtle changes as well as a couple of big changes. A few of the key points, we removed and replaced the door bars along with rear intrusion bars, added rock sliders and boat sides with 1/2” UHMW attached to the boat sides and main skid plate. Re worked the floor aluminum and added a rear firewall. Changed all four shock mount locations on the car while we installed our Huffmans fab 9” axle housings with outers front and rear with rear steer while sporting 40spl branik shafts and joints with Yukon third members. As we started with the upgrades we re-worked the rear tubes to add the mojab rear suck down winch and rear storage with a nice aluminum tray. Installed a new roof and side panels with sea decking for a nice touch to outfit the changes. To top it off Richard designed the wrap that really sets the car off to make it one of a kind.
(Check out to see before and during photos)

A set of front and rear steer 72” wms we recently finished up. Using our in house axle housings with supwrduty knuckles,...
05/26/2026

A set of front and rear steer 72” wms we recently finished up. Using our in house axle housings with supwrduty knuckles, in house front ram mount and truss, rear back bone truss, along with custom rear ram mount. These axles are outfitted with Yukon centers, 40 spline shafts with branik joints, Ecgs drive flanges, Huffmans fab pinion yoke guards, psc 3x9 rams with lm1 captured mounts, busted knuckle king joints and Mofab zero Ackerman high steer on all four corners with wilwood brakes.

Finished out a roller using our Huffmans fab cnc chassis, sitting on radflo 2.5” coilovers with 72” wms in house axles w...
05/12/2026

Finished out a roller using our Huffmans fab cnc chassis, sitting on radflo 2.5” coilovers with 72” wms in house axles with the rear using crane unit bearing cups with a full internally gusseted back bone truss. The front using 05+ superduty knuckles with a beefy ram mount. We performed link mounts, shock mounts, links bars, bump stop cans and bump pads on axles, drivetrain mounts set up for ls, th350. Finished off with aluminum work consisting of roof, side panels, and a full floor, rear firewall, and engine / trans cover.

Address

7717 Hixson Pike
Hixson, TN
37343

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm
Saturday 9am - 5:30pm

Alerts

Be the first to know and let us send you an email when Huffman's Fab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Huffman's Fab:

Shortcuts

Share