Hearne Steel Co Inc

03/26/2026

Hearne Steel is proud to support The Blaze softball team's pursuit of excellence in Cypress/Katy.

02/02/2023

Due to power outage Hearne Steel is closed today - Feb 2nd

04/08/2020

12/29/2015

So what’s the difference between a dome cap and a line post cap when it comes to fence fittings? While a dome cap is used as a cover for end, corner, and gate posts, the line post cap is necessary for intermediary posts, when the top rail needs to pass through the cap.

12/24/2015

Tension wires are manufactured with or without a pattern on them. These wires are usually used along the top of a chain link fence in place of a top rail or along the bottom of a chain link fence for additional security.

12/15/2015

The most convenient place for a gate can be next to a building, in the middle of the fence, or other locations. It may need to automatically close, swing open 90° or 180° flat. A fence fitting manufacturer has plenty of options to fit whatever choices you make.

12/10/2015

The two most common metals for fence fittings are steel and aluminum. Steel gives your fence great strength, and is often galvanized to prevent rust. Aluminum is more lightweight than steel while being just as strong, and naturally doesn’t rust.

12/08/2015

Large fencing projects can stretch for tens or even hundreds of miles, which means hundreds of different fittings. Working directly with a fence fitting manufacturer will make sure that you get the exact fittings that you need in the quantity that you need.

12/03/2015

The integrity of the whole fence can be compromised by a gap next to buildings, but the right fittings can take care of the problem. For example, wall support clamps can hold a pipe or pole to the wall so the fence and the edge of the building overlap.

12/01/2015

Have you ever had a gate that simply wouldn’t stay closed? This can not only be annoying, it can also be a hazard. A fence fitting manufacturer can help you get the right latch for your gate to make sure that it will always stay closed.

11/26/2015

The type of fence fittings needed will depend on what specifically you want to hold. For instance, you will need different fittings to hold two or more fences together, hold the fence with another connecting post, or connect two rails in a certain direction.

11/24/2015

For easy opening of swinging gates, and to help with stability and remove stress from corner posts, install a gate wheel that swivels. Especially good for asphalt or concrete, it facilitates quick entry and closure.