Emerick Welding & Repair

04/04/2026

Another machine frame out the door this week

03/13/2026

Recently completed machine frames. These were quite large coming it at almost 16’ long

02/15/2026

01/21/2026

Completed 2 machine weldments and they go out the door tomorrow

12/08/2025

Another heavy weldment completed for a great customer. That bottom plate is 10’ long 16” wide and 2 3/4” thick. With 6” I beams welded the length on the inside and outside. A little tight to get in there but finished good.

12/07/2025

Done some aluminum piping/fittings for a customer to get his turbo project closer to finished up

11/21/2025

Just completed a couple machine base frames for a new customer source. Very pleased to have this new customer.

10/02/2025

Customer brought in a plastic oil tank that is obsolete and needed one made as a replacement. New tank was made out of aluminum and welded in new threaded bungs. Tank turned out very good and will be better than the original.

08/21/2025

Custom high pressure hydraulic line for a press. Machined mounting fl**ge welded to 1 1/2” schedule 160 seamless steel pipe. Turned out really nice.

06/26/2025

Accidents happen and they need fixed.. was able to get this one back in the water in a short amount of time

06/26/2025

Customer brought me this part from a heavy duty forklift mast. A 3” thick piece of steel was snapped off that holds the forks. I had to remove the old and weld on a new one. This was a lot of work but turned out pretty good

06/07/2025

Another one done and out the door…