80Nine_Fabworx

80Nine_Fabworx - Welding
- CAD Design
- CNC Plasma Cutting
- CNC Laser Engraving
- Custom Fabrication

80Nine Fabworx's newest offering is storm shelters. I've had these brewing in the background for some time now but with ...
04/04/2025

80Nine Fabworx's newest offering is storm shelters. I've had these brewing in the background for some time now but with the recent storms I feel that it should be known publicly.

I will be offering these in multiple standard sizes. The smallest will be 4ft x 5ft 6.5ft high cube.

Also a spacer saver corner style. (2nd picture.)

Custom sizes can be had upon request.

Concrete pads will be an option also

02/01/2025

In a stacked class of competition Louie Saltsman and “Showtime” come out on top to take home the WIN at the 2025 Southern Invitational!!

Everyone knows that Toyota pickups run forever, they tend to outlast their factory frames due to rust. This truck has ma...
01/15/2025

Everyone knows that Toyota pickups run forever, they tend to outlast their factory frames due to rust. This truck has many more miles left in it, so I got it patched up to last another 20 years.

This trailer came in with a damaged coupler from being overloaded. Got the new one installed over the weekend, to keep t...
08/26/2024

This trailer came in with a damaged coupler from being overloaded. Got the new one installed over the weekend, to keep the company's downtime to a minimum.

Have something similar needing done, send me a message.

Some more pipe work on this 3.0sb truck.
08/12/2024

Some more pipe work on this 3.0sb truck.

Finally getting around to posting a few things that have kept me busy the past few weeks.First is this 3rd gen 3.0 pull ...
06/26/2024

Finally getting around to posting a few things that have kept me busy the past few weeks.

First is this 3rd gen 3.0 pull truck that I finished up a few weeks ago. This truck is definitely a headturner.

Got the cab set back down on the frame after paint. Now I have 7 days left to get this thing ready to hook to a sled.
04/26/2024

Got the cab set back down on the frame after paint. Now I have 7 days left to get this thing ready to hook to a sled.

A few smaller jobs over the last 2 weeks. Repaired a mower tower drilled/ground out the cracks then added a couple of re...
04/06/2024

A few smaller jobs over the last 2 weeks.
Repaired a mower tower drilled/ground out the cracks then added a couple of reinforcement plates.

Built a trolling mount mount for an offshore boat using customers supplied materials, along with some braces for his porch.

Customer shortened his truck frame and needed it to "hold" so we welded in some frame plates.

Lastly we repaired the rusted out 3rd gen frame. Then built some traction bars for him.

After approximately 80 hrs of design and work, you have a truck with 16 inches of lift that now sits level, rides smooth...
04/02/2024

After approximately 80 hrs of design and work, you have a truck with 16 inches of lift that now sits level, rides smooth and most importantly safe to drive.

Here at 80Nine Fabworx everything we (I) do is usually one off custom items, especially when it comes to vehicle suspens...
03/27/2024

Here at 80Nine Fabworx everything we (I) do is usually one off custom items, especially when it comes to vehicle suspensions. Everything is CAD designed and built in house.

I had a customer call and say, "I have a truck with a 16 inch lift kit, but don't feel safe driving it. Can you take a look at it and see if you can come up with a solution?"
After very little time looking at it and discussing we worked out a solution. We got rid of the leaf springs and 10 inch blocks and converted it to a 4 link setup with good suspension geometry.

First piece of the puzzle were these bolt on 4 link conversion brackets. Using 5/8 grade 8 hardware.

Wrapped up @5.9_cummins_99 compound turbo setup just in time for the dyno event this afternoon. Cant see them but we upg...
03/16/2024

Wrapped up @5.9_cummins_99 compound turbo setup just in time for the dyno event this afternoon. Cant see them but we upgraded to 3.5inch charge pipes with flex seal couplers.

Address

Gordonsville, TN
38563

Website

Alerts

Be the first to know and let us send you an email when 80Nine_Fabworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 80Nine_Fabworx:

Share