Lightweight Fill

Lightweight Fill Lightweight Aggregate Geotechnical Fill available throughout the United States. The solution to settlement issues on a wide range of construction projects

Stalite lightweight aggregate has been used as geotechnical fill material for many years. There are two types of lightweight fill materials:
3/4 inch- it has an in-place density of 60 pcf and friction angle of 43 to 46 degrees. Fines- it has an in-place density of 75 pcf and friction angle of 43 to 46 degrees, the fines also have a CBR value of 33 @ 0.3in

12/19/2020

New York Municipal Airport’s LaGuardia Field was officially dedicated on October 15, 1939. The airfield is located on the waterfront of Flushing and Bowery Bays in East Elmhurst, Queens and was constructed on a site that required moving landfill from nearby Rikers Island onto a metal reinforcing f...

12/19/2020

Stalite Environmental

10/17/2016

The key issue at the Wastewater Plant was developable space. The most feasible way to make room for the needed improvements was to drain a portion of an existing pond, approximately 3/4 acre in size. Excavation to a depth of 23 feet would be required to construct a new gravity thickener, pump station, associated piping and site work. Soil borings indicated that the soft soils onsite could pose a problem for the new construction and network of piping. The engineers estimated if they used normal fill material they could expect settlement in the 8”-10” range. This was not an acceptable plan.>>>>See more at http://escsi.org/ContentPage.aspx?id=1243

Owner: Trinity River Authority of TexasLocation: Central Regional Wastewater System, Dallas, TexasEngineer: CP&Y, Inc.Contractor: Eagle ContractingEngineering Solution: Expanded Shale Lightweight Aggregate

President Street Intersection Lightweight FillSavannah GeorgiaRaising the Grade without raising the load
09/17/2016

President Street Intersection Lightweight Fill
Savannah Georgia
Raising the Grade without raising the load

06/26/2016

Stalite and the ESCSI are in Chicago at ASTM continuing the work of fine tuning Lightweight Fill specifications and testing.

Visit Stalite.com and ESCSI.org for more info on lightweight aggregate geotechnical fill
05/12/2016

Visit Stalite.com and ESCSI.org for more info on lightweight aggregate geotechnical fill

- Stalite

09/19/2011

Some of our new work is showing lightweight fines can be cheaper to put in place than normal weight stone in Charlotte and Greensboro.

07/27/2011

Great Visits today with Falcon Engineering, ECS, and AMEC/Mactec in Raleigh. Thank you guys for spending so much time discussing lightweight fill with us today

Thanks for all the likes, we have a permanent URL now. The address of the page is www.facebook.com/LightweightFillThanks...
07/23/2011

Thanks for all the likes, we have a permanent URL now. The address of the page is www.facebook.com/LightweightFill
Thanks Again Everyone

Lightweight Fill - Stalite Lightweight Aggregate Fill | Facebook

The newest Lightweight Fines Geotechnical  Fill Brochure Dana Morton just finished for us to use.. Thanks Dana
07/20/2011

The newest Lightweight Fines Geotechnical Fill Brochure Dana Morton just finished for us to use.. Thanks Dana

Link to Stalite Geotechnical Page
07/20/2011

Link to Stalite Geotechnical Page

- Stalite

Lightweight Fill on the CATS South Blvd Station in Charlotte, NC
07/14/2011

Lightweight Fill on the CATS South Blvd Station in Charlotte, NC

Address

16815 Old Beatty Ford Road
Gold Hill, NC
28071

Alerts

Be the first to know and let us send you an email when Lightweight Fill posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Lightweight Fill:

Share