ZAG Equipment

06/04/2026

Take control of your mold temperatures today with TempEase Hot Runner Controllers - a smart, cost-effective solution designed to deliver consistent, reliable temperature control across your molding process.

✔ Available in 5, 8, and 12 zone configurations
✔ Full featured, self-tuning system
✔ Compatible with most plug-in module systems
✔ Improves part quality and reduces scrap

From portable units to full 48-zone systems, TempEase gives you the flexibility and performance your operation demands.
Ready to upgrade your process control? Contact us at [email protected] to learn more.

05/28/2026

Great week at Greiner Bio-One in Monroe, NC for our Elements of Injection Molding training class. We had more than 15 students participating in hands-on training focused on understanding the relationship between the machine, mold, material, and process. From machine setup and process adjustments to troubleshooting and part quality, the engagement from the group was outstanding all week long.

A huge thank you to the team at Greiner Bio-One for opening up your facility, equipment, and operations to support this training. Your willingness to invest in employee development and real-world processing knowledge made this an excellent learning environment for everyone involved. We truly appreciate the partnership and hospitality.

Hands-on processing and troubleshooting remain one of the fastest ways to build stronger molding teams.

05/21/2026

On Memorial Day, we honor the heroes who gave everything to protect our nation and preserve the freedoms we hold dear. 🇺🇸
Their selfless service will never be forgotten. From all of us at ZAG, we remember with gratitude and honor their enduring legacy.

05/14/2026

Struggling with color consistency in your molding process? Inconsistent dosing can lead to scrap, rework, and customer complaints—but it doesn’t have to.

ColorSave Gravimetric & Additive Feeder delivers precise, reliable dosing down to a single pellet - ensuring consistent color quality shot after shot.

✔ Accurate gravimetric dosing
✔ Consistent metering for better part quality
✔ Reduced scrap and material waste
✔ Ideal for micro pellets and quick-melt masterbatches

Say goodbye to hand mixing and guesswork - and take control of your color process. Ready to improve consistency and reduce waste? Give us a call: (336) 449-6376

05/07/2026

Still relying on manual flow regulators? It’s time to upgrade your mold cooling control. With Flosense Mouldpro Water Manifolds, you can retrofit your existing system and gain real-time visibility into your process—helping improve stability, part quality, and overall productivity.
✔ Monitor flow, temperature, and pressure digitally
✔ Set alarm limits to maintain process control
✔ Access data storage, trends, and export capabilities
✔ Achieve faster mold changeovers
✔ Integrate with OPC-UA / Euromap systems

With an intuitive touchscreen and the ability to monitor up to 48 cooling circuits, Flosense gives you the insight and control needed to optimize performance at every stage. Take the guesswork out of mold cooling—and start making data-driven decisions. Contact us to learn more about upgrading your system (336) 449-6376.

Digital Flow Meter | Digital Flow RegulatorUpgrade your moulding machine with new digital flow manifold and improve your productivity.Replacing traditional a...

04/28/2026

Ready to strengthen your injection molding knowledge and skills?

Join us this spring for hands-on training and FREE webinars designed to help you improve efficiency, processing, and overall performance.

📍 In-Person Training
• May 5–7, 2026 – Principal Concepts of Injection Molding
• June 2–4, 2026 – Mold Setting Introductory Class

💻 FREE Webinars
• May 20, 2026 – Machine Sizing Webinar
• June 10, 2026 – Processor’s Guide to the Technical Data Sheet

Whether you're looking to build foundational knowledge or fine-tune your process, these sessions deliver practical, real-world insights you can apply immediately. Secure your spot today and invest in your expertise.

https://zagequipment.com/services/training/

04/20/2026

THIS WEEK: We’re excited to be exhibiting at MD&M South 2026! Join us April 22–23 at the Charlotte Convention Center and stop by Booth 2728 to connect with our team.
At our booth, you’ll learn more about solutions from:
✔ Training & Consulting services
✔ Flosense
✔ Kistler
✔ Plasdan
If you're looking to improve process control, automation, and productivity in injection molding, we’d love to talk.

Register for the show here:
https://www.xpressreg.net/register/MDMS0426/landing.asp?sc=INVITE972540

Promo Code: INVITE972540
See you in Charlotte!

04/16/2026

Join us May 5–7 for a 3-day training with industry expert Marty Key:Principal Concepts of Injection Molding (our Intermediate Class).

Designed for those with basic experience, this hands-on course goes beyond the fundamentals to build a deeper understanding of the molding process - combining classroom learning with real machine-based training.

In this class, you’ll:
✔ Strengthen your understanding of materials and processing parameters
✔ Learn how machine controls impact part quality
✔ Explore mold design, runner systems, and key components
✔ Evaluate machine performance and testing methods
✔ Build a more consistent, repeatable molding process
✔ Review important safety practices
If you're looking to improve efficiency, troubleshoot with confidence, and elevate your skillset - this training is for you.
Secure your spot today: zagequipmentsales.zohobookings.com/ #/injmoldingtraining

04/15/2026

Join us May 5–7 for a 3-day training with industry expert Marty Key:Principal Concepts of Injection Molding (our Intermediate Class).

Designed for those with basic experience, this hands-on course goes beyond the fundamentals to build a deeper understanding of the molding process - combining classroom learning with real machine-based training.

In this class, you’ll:
✔ Strengthen your understanding of materials and processing parameters
✔ Learn how machine controls impact part quality
✔ Explore mold design, runner systems, and key components
✔ Evaluate machine performance and testing methods
✔ Build a more consistent, repeatable molding process
✔ Review important safety practices

If you're looking to improve efficiency, troubleshoot with confidence, and elevate your skill set - this training is for you.

Secure your spot today: zagequipmentsales.zohobookings.com/ #/injmoldingtraining

04/09/2026

Build stronger fundamentals this spring with ZAG.
Whether you prefer in-person instruction or convenient online learning, we’ve got you covered.

📍 May 5–7, 2026 – Principal Concepts of Injection Molding (In-Person)
📍 June 2-4, 2026 – Mold Setting Introductory Class (In-Person)
💻 April 15, 2026 – Water Flow Webinar (FREE)
💻 May 20, 2026 – Machine Sizing Webinar (FREE)
💻 June 10, 2026 – Processors Guide to the Technical Data Sheet (FREE)

Secure your spot and take the next step in your professional development: https://zagequipment.com/services/training/