AIM - Automated Industrial Motion

05/18/2026

Meet the AIM 3000 CNC Spring Coiler

The AIM 3000 can coil wire up to 0.375” in diameter, making it a tough workhorse of a coiling machine that's built to last through millions of miles of wire. You can choose between 4, 5, and 6 axes for maximum control over your products. This system is ideal for heavy-duty applications like garage door springs, agricultural equipment springs, and oil rig springs.

⚙️ Equipment Features:

✅ Feed Speed (in/sec): 60
✅ Max. Wire Size (in): 0.375
✅ Min. Wire Size (in): 0.125
✅ Feed Length: Unlimited
✅ Coil Diameter Range: 3 Index to 5"
✅ Power (3 phase): 480 Volt

👉 Learn more about the AIM 3000 here: https://loom.ly/gvbmnfg

04/15/2026

New video drop 📽️ ✨

Take a look at this custom piston-ring coiling system built around the AIM 1500 CNC coiler.

Key highlights:

⭕ Coils round and rectangular wire across a wide size range
⭕ Produces round, oval, and custom-shaped rings
⭕ Controls critical ring characteristics like flatness, dish, helix, gap, and light-tightness
⭕ Servo-controlled features for precise ring geometry
⭕ Fast changeovers with cassette tooling and software homing
⭕ Integrated for marking and downstream automation

This ring coiling setup is one more example of AIM - Automated Industrial Motion's specialty: turnkey coiling systems.

https://loom.ly/8POLs0g

04/13/2026

How many points do you need?

If you ask us, only 1️⃣.

Spring coiling is commonly categorized into single-point, dual-point, and multi-point forming systems, each defined by how the wire is shaped during the process.

Single-point coilers utilize a single primary forming tool, offering precise control over key spring parameters such as diameter, pitch, and leg configuration. This streamlined architecture simplifies tooling and setup while enhancing process visibility for operators.

The reduced complexity of single-point systems supports quicker changeovers and consistent results, making them well-suited for manufacturers producing a wide range of spring designs.

While dual-point and multi-point coilers are also used within the industry, AIM Coil uses single-point technology because its versatility, precision, and ease of operation across diverse spring manufacturing applications.

03/17/2026

Our coilers are built to be activated with a simple sequence of steps.

In this video, you can see how it begins:

➡️ Feed the wire
➡️ Guide it over the arbor
➡️ Tools adjust to the programmed parameters
➡️ Coiling begins
➡️ An automatic cutter slices each finished coil

From there, the machine repeats the process with incredible speed and consistency.

It's that easy.

11/25/2025

Single-point vs. dual-point spring coilers — which wins in versatility, precision and ease of changeover? 🤔

Dive into the differences and see why we favour single-point systems for our spring manufacturing: https://loom.ly/OADz3AU

Single-point spring coilers are more versatile in the types of springs they can produce, while dual point spring coilers offer some advantages for straight compression springs. Both have different strengths and weaknesses, and the ideal spring coiler type depends on the variety of springs you hope t...

11/20/2025

This year’s holiday shopping: give thoughtfully, give American-made.

And, if you're looking for an under-$25 stocking stuffer, this list is for you. 💡🇺🇸

https://loom.ly/urODyk8

Affordable American-made gifts are more accessible than ever if you know where to look.

10/29/2025

🎥 New video drop ⬇️

This video spotlights our AIM 1000 CNC spring coiler, tooled for constant-force spring production, and integrated with a custom automation setup.

Here’s what’s happening in the process:

⚙️ Strip material is coiled with ultra-consistent feed, thanks to smart sensors that detect wire ends and splices
🧴 Programmable lubrication + laser marking boost part quality and traceability
🔥 In-line heat treatment stress-relieves each spring
❄️ A cooling oven brings parts back to handling temperature instantly

🚀 Over 2,000 fully processed constant-force springs per hour, each fresh out of the oven and ready for assembly.

From raw material to production-ready coil. This is true end-to-end automation.

Check out the new video here ⬇️
https://www.youtube.com/watch?v=1jmLS1qOf64

AIM's turnkey solutions focus on constant force spring coiling.Automated Industrial Motion (AIM) specializes in automated coiling systems for constant-force ...

10/28/2025

From tight tolerances to high-volume production, our spring coilers are engineered to meet the exacting standards of sectors like:

✅ Heating and cooling
✅ Food processing
✅ Automotive
✅ Medical device manufacturing
✅ Industrial automation

and countless more.

In addition to our lineup of off-the-shelf coilers, we also do custom builds—tell us what you need, and we will build it together. 🤝

Our spring coiling machines are 100% designed, engineered, and built in the USA, ensuring unmatched quality, durability, and responsive support.

See why leading manufacturers trust our coilers for mission-critical spring production.

10/24/2025

Get the full specs on our CNC Spring Coilers—feed speed, wire range, coil diameter, power, and more for all 8 models (0.006″–0.787″).

Take spring precision to the next level. ⚙️

https://loom.ly/tEnq9z4

Enter your information below to download the CNC spring coiler brochure. You’ll find all the information you’ll need to know to choose the AIM CNC coiler that’s right for your company, including: Feed Speed Wire Range...