Summit Paint and Stain

Summit Paint and Stain We are a Sashco Log Home Maintenance Products & PPG Paint Distributor

visit us: www.summitpaintandstain.com
(1)

12/01/2025

We're not going to lie. Choosing the right color of stain for your log home can be a challenge. There are so many options and so many different types of stains. You have to worry about compatibility with old products, pricing, and how will it look on my log home?

Our best advice when it comes to stains is to try before you buy. Order samples. Test them out on a spot with clean and sound wood (wood that hasn't rotted or mimics the condition of your ready to stain log cabin.) Let it dry. Do you like the color? Is it the color you expected? If so, then you're ready to stain.

If you need samples or help picking a stain or matching the color of an old stain, give us a call at (303) 284-4373 or visit us online at summitpainandstain.com

11/28/2025

Did you know we have two convenient Colorado locations? We're in Denver off of I-25 and I-70 and up in Frisco in the heart of the Rockies Mountains. Stop by and say hi. We're happy to shoot the breeze and answer any questions you have about log home restoration and maintenance.

Happy Thanksgiving from our table to yours! Have a blessed day! 🦃
11/27/2025

Happy Thanksgiving from our table to yours! Have a blessed day!

🦃

How often should I re-stain my log home? Most manufactuers suggest every 3–5 years. A quick maintenance coat of Cascade®...
11/26/2025

How often should I re-stain my log home? Most manufactuers suggest every 3–5 years. A quick maintenance coat of Cascade® or Transformation Stain® keeps your logs protected and looking great. And a few small touch-ups now save big money on repairs later.

Do I have to prep inside my cabin too when applying Symphony? Just because it’s inside doesn’t mean you can skip prep! H...
11/25/2025

Do I have to prep inside my cabin too when applying Symphony?

Just because it’s inside doesn’t mean you can skip prep! Here are a couple rules of thumb according to Sashco:

✨NEW WOOD: If you’ve decided to keep your logs natural looking and only want to apply Symphony to bare wood, you'll get the best results if you sand the wood to a smooth finish with fine sandpaper. Be careful to remove ALL dust before finishing. Do NOT use steel wool; it may cause rust stains. For a smoother finish, sand between coats.

🌲FINISHED WOOD: Compatibility is a HUGE issue, so logs that already have some type of stain or sealer on them will need to be tested for compatibility; CALL Sashco so they can talk you through the testing procedure. For best adhesion coatings not made by Sashco, it's usually best to lightly sand the surface before applying Symphony. Old finishes may need to be mechanically removed if a lighter appearance is desired. The smoother the prep, the smoother the shine.

Do you have questions? Visit us at summitpaintandstain.com or call us at one of the numbers below ⤵

Denver: (303) 284-4373
Frisco: (970) 668-0211



FAQ #1: Can you stain over old stains? It's tricky and we don't recommend it. And here's why…Oil and water stains don't...
11/24/2025

FAQ #1: Can you stain over old stains?

It's tricky and we don't recommend it. And here's why…

Oil and water stains don't mix and you'll run into issues.

If you're unsure about what's been applied on your log home check with a log home contractor with more than a few years experience or one that's gone through Sashco's Zero Failures training to get their expert opinion on what your'e options are.

Can't find a contractor to ask? Give us a call at one of the numbers below. We'll be happy to connect you with someone who can help.

Denver: (303) 284-4373
Frisco: (970) 668-0211

11/20/2025

One question we get a lot of is I have an existing log home can I put an oil based stain over a water based stain? The short answer is no. The long answer is it's complicated. You'll get the best results if you start from a good clean wood surface to start from. Oil and water don't mix. If you put an oil based and water based stain together you may get unexpected results that cost you more in the end. Your best bet is to check with the manufactuer. If this is something you're running into give us a call at (303) 284-4373 we'll be happy to talk shop.

Is the breeze starting to sneak in between your logs now that the weather's getting colder? It might be time to reseal y...
11/19/2025

Is the breeze starting to sneak in between your logs now that the weather's getting colder? It might be time to reseal your log home.

Keep the cozy feel of your log home without compromising performance. Whether you're building a brand spankin' new log home or restoring a rustic retreat it's the go to sealant for between your logs.

Got questions about Log Jam? Give us a call at (303) 284-4373 we'll be happy to chat and help you figure out what's the best bet for your project.

11/16/2025

Are you looking for something to protect you interior logs? Symphony clear coat by can be used with or without stain. It's a little thicker than an exterior coating. One of the main benefits is it makes it super easy to clean with just a soft cloth, plus it protects the logs your kitchens from any grease from cooking.

Need a pro in Colorado that knows what they're doing and is professional? Contact Brad at Don't just take our word for ...
11/15/2025

Need a pro in Colorado that knows what they're doing and is professional? Contact Brad at Don't just take our word for it though, check out this project in Placerville, CO.

They used Sashco’s CPR to clean and brighten the logs. It was finished in with two coats of Sashco’s Transformations Log & Timber in Brown Tone Medium.

Why do log home stains fail? If you've noticed peeling, cracking, or fading on your log cabin, one or a few of these may...
11/12/2025

Why do log home stains fail? If you've noticed peeling, cracking, or fading on your log cabin, one or a few of these may be the culprit.

❌ No back-brushing when the stain was applied.
❌ Wet wood or poor prep.
❌ Old non-drying oils under new stain.
❌ Applying stain in excessive heat or too cold of temps.

Properly prep your logs from the get go. This means getting down good sound clean wood.

Blast or pressure washing old stain off. Then, sand it down down your logs to remove any fuzzing or what the log folks call "felting".

Next, make sure you're applying stain properly. Follow the manufacturers specifications and have plenty on hand. You'll need to use more stain than you think and really saturate logs.

Remember to back brush to make sure it gets into all the nooks and crannies for maximum protection from moisture that can cause rot.

And finally, inspect your log home every fall and spring too! We're here to help, if you have any questions give us a call at (970) 688-0211 or visit summitpaintandstain.com

Today we want to thank our veterans who served and sacrificed for this great country. Thank you, we salute you!
11/12/2025

Today we want to thank our veterans who served and sacrificed for this great country. Thank you, we salute you!

Address

842 Summit Boulevard #18, �
Frisco, CO
80443

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm
Saturday 8am - 1pm

Telephone

+19706680211

Website

Alerts

Be the first to know and let us send you an email when Summit Paint and Stain posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Summit Paint and Stain:

Shortcuts

Share

Category