Roam Technologies

Roam Technologies Roam builds Power & RF Systems for a variety of industries—Telecom, Entertainment, Construction, Transportation, & Oil & Gas. Power on with Roam.

Products include Cam-Lok Generator Interface, Power Output, & Power Input Panels, and Manual Transfer Switch Panels. Roam Technologies designs and builds Power and RF Systems for a variety of industries, such as Telecom, Entertainment, Emergency Power, Transit, Construction, and Oil & Gas. Roam's products include Cam-Lock panels for Generator Connections (Docking Station/Tap Box) and Power Input a

nd Output applications, Manual Transfer Switch Panels with Cam-Locks (also for Generator Connections), and Telecom systems, such as Temp-Controlled Outdoor Cabinets and well as DC Power and DC Distribution systems. Widely used in the telecom, electrical, construction, transit, convention, and entertainment industries, such Cam-Lok enclosures are also known as Tap Boxes, Inlet Boxes, Docking Stations, or Generator Plugs/Generator Quick Connects. These units are offered in a variety of configurations: 200 Amp to 1200 Amp, 240 VAC or 600 VAC, Single or Three Phase, and Compact or In-Line designs. Roam's other product lines include temp-controlled outdoor cabinets, DC power & distribution systems, and wireless site base station equipment. We design and manufacture telecom and power products including: PDUs/Breaker Panels, Generator Interface Panels, Battery Back-Up & Disconnect equipment, Power Supplies & Converters, RF Amplifiers & Base Units, Thermally Controlled Cabinets, Alarm Panels & Replicators, and Fuse Panels. Roam Technologies is a privately held corporation founded in 2012. We make a multiple lines of critical infrastructure power and telecom products. Roam designs and builds our products in the United States, eliminating time-consuming, error-prone interactions and delivery issues associated with overseas suppliers. With Roam, there is no "slow boat from China" delaying vital deliveries. Roam also has exclusive license to manufacture, market, and sell the entire line of Cam-Lock, Telecom, and Power products formerly produced by Micrin Technologies Corporation, Micrin Technologies LLC, United States Radio Frequency (USRF) Corporation, and Micrin Systems.

New from Roam TechnologiesThree-Phase 400 Amp Manual Transfer Switch Panels with Cam-LocksRoam's MTC 7003 ES4Kv series (...
08/27/2021

New from Roam Technologies
Three-Phase 400 Amp Manual Transfer Switch Panels with Cam-Locks

Roam's MTC 7003 ES4Kv series ("v" = Voltage Code) of 400 Amp Manual Transfer Switch panels provide a secure and easy-to-connect Cam-Lock connection between a generator and building main power, letting you switch a building main circuits (by means of physically turning a switch) between utility power and generator power. Roam's Manual Transfer Switch (MTS) panels combine a Generator Connection Box and a Transfer Switch, providing a single-panel solution for exterior connection and switching of emergency power. Roam's MTS panels are UL 1008 listed and use E1016 (J-Series /16 Series) Male Cam-Lock connectors.

Roam's line of MTS panels includes Service Entry Rated panels, Switched Neutral panels, panels with no Neutral connection, and Alternate Wire capable panels for critical emergency power. These panels are all built with a dedicated wire chase (wireway) in the back to allow safe cable entry (via conduit) from the bottom. Roam's MTS panels all use Open (Open Transition) transfer switches, with On-Off-On corresponding to Utility-Off-Generator positions.

Service Entry Rated Option - Many of Roam's MTC 7003 ES4Kv series Manual Transfer Switch panels are Service Entry rated, meaning that these panels are suitable for use as service equipment/service disconnects. A service disconnect is simply the first disconnect between the external power source (utility or generator) and building main circuits. All of our Service Entry rated MTS panels have a "-SE" extension in their part number. Service Entry rated panels are available with a standard UL listing (USA), but not with a cUL (Canadian) listing.

Switched Neutral Option - Normally, MTS panels are built with the Neutral connection not running through the Transfer Switch (frequently referred to as a "solid" Neutral). However, Roam does offer a Switch Neutral option, where the Neutral connection is switched through Transfer Switch (i.e., an additional pole runs through the Transfer Switch). Switch Neutral panels are typically used when the generator is grounded as a separately derived system at the site. It is important to be aware that Switched Neutral panels can not also be Service Entry rated under UL 1008. We advise that before selecting a Switch Neutral option, you should consult a qualified electrical designer who is familiar with your site and local electrical codes. All of Roam's Switched Neutral rated MTS panels have a "-SN" extension in their part number.

Alternate Wire Option for Critical Emergency Power - Roam offers an Alternate Wire option for its MTC 7003 ES4Kv 400A Manual Transfer Switch panel line designed for critical emergency power users, such as police/fire/EMS departments, utilities, government agencies, and military bases. This option allows generators to be securely connected to the MTS—even when Cam-Lock connectorized cables are unavailable.

Roam MTS panels with this option can accept unterminated cables (90º C insulation, copper wire only) of any size from 4 AWG to 350 MCM through special spring cap-covered access ports. The electrician making the emergency hook up simply opens the inside front panel, feeds the stripped end of the cables up to a set of dedicated lugs inside the MTS panel, tightens those lugs to the specified torque, and then closes and secures the inside front panel, and a power connection to the generator is ready for use.

Note that Alternate Wire terminals are for emergency use only; installers should never use both Cam-Lock connectors and Alternate Wire terminals at the same time. Installers should also check to ensure that the cable size/type they are using can support the Amperage that may be drawn.

New from Roam TechnologiesSingle-Phase/400 Amp Manual Transfer Switch with Cam-LocksRoam's MTC 7001 ES4Kv series ("v" = ...
08/27/2021

New from Roam Technologies
Single-Phase/400 Amp Manual Transfer Switch with Cam-Locks

Roam's MTC 7001 ES4Kv series ("v" = Voltage Code) of 400 Amp Manual Transfer Switch panels provide a secure and easy-to-connect Cam-Lock connection between a generator and building main power, letting you switch a building main circuits (by means of physically turning a switch) between utility power and generator power. Roam's Manual Transfer Switch (MTS) panels combine a Generator Connection Box and a Transfer Switch, providing a single-panel solution for exterior connection and switching of emergency power. Roam's MTS panels are UL 1008 listed and use E1016 (J-Series/16 Series) Male Cam-Lock connectors.

Roam's line of MTS panels includes Service Entry Rated panels, Switched Neutral panels, and Alternate Wire capable panels for critical emergency power. These panels are all built with a dedicated wire chase (wireway) in the back to allow safe cable entry (via conduit) from the bottom. Roam's MTS panels all use Open (Open Transition) transfer switches, with On-Off-On corresponding to Utility-Off-Generator positions.

Service Entry Rated Option - Many of Roam's MTC 7001 ES4Kv series Manual Transfer Switch panels are Service Entry rated, meaning that these panels are suitable for use as service equipment/service disconnects. A service disconnect is simply the first disconnect between the external power source (utility or generator) and building main circuits. All of our Service Entry rated MTS panels have a "-SE" extension in their part number. Service Entry rated panels are available with a standard UL listing (USA), but not with a cUL (Canadian) listing.

Switched Neutral Option - Normally, MTS panels are built with the Neutral connection not running through the Transfer Switch (frequently referred to as a "solid" Neutral). However, Roam does offer a Switch Neutral option, where the Neutral connection is switched through Transfer Switch (i.e., an additional pole runs through the Transfer Switch). Switch Neutral panels are typically used when the generator is grounded as a separately derived system at the site. It is important to be aware that Switched Neutral panels can not also be Service Entry rated under UL 1008. We advise that before selecting a Switch Neutral option, you should consult a qualified electrical designer who is familiar with your site and local electrical codes. All of Roam's Switched Neutral rated MTS panels have a "-SN" extension in their part number.

Alternate Wire Option for Critical Emergency Power - Roam offers an Alternate Wire option for its MTC 7001 ES4Kv 400A Manual Transfer Switch panel line designed for critical emergency power users, such as police/fire/EMS departments, utilities, government agencies, and military bases. This option allows generators to be securely connected to the MTS—even when Cam-Lock connectorized cables are unavailable.

Roam MTS panels with this option can accept unterminated cables (90º C insulation, copper wire only) of any size from 4 AWG to 350 MCM through special spring cap-covered access ports. The electrician making the emergency hook up simply opens the inside front panel, feeds the stripped end of the cables up to a set of dedicated lugs inside the MTS panel, tightens those lugs to the specified torque, and then closes and secures the inside front panel, and a power connection to the generator is ready for use.

Note that Alternate Wire terminals are for emergency use only; installers should never use both Cam-Lock connectors and Alternate Wire terminals at the same time. Installers should also check to ensure that the cable size/type they are using can support the Amperage that may be drawn.

New from Roam TechnologiesThree-Phase/200 Amp Manual Transfer Switch Panels with Cam-Lock ConnectorsRoam's MTC 7003 ES2K...
08/27/2021

New from Roam Technologies
Three-Phase/200 Amp Manual Transfer Switch Panels with Cam-Lock Connectors

Roam's MTC 7003 ES2Kv series ("v" = Voltage Code) of 200 Amp Manual Transfer Switch panels provide a secure and easy-to-connect Cam-Lock connection between a generator and building main power, letting you switch a building main circuits (by means of physically turning a switch) between utility power and generator power. Roam's Manual Transfer Switch (MTS) panels combine a Generator Connection Box and a Transfer Switch, providing a single-panel solution for exterior connection and switching of emergency power. Roam's MTS panels are UL 1008 listed and use E1016 (J-Series/16 Series) Male Cam-Lock connectors.

Roam's line of MTS panels includes Service Entry Rated panels, Switched Neutral panels, and panels with no Neutral connection. These panels are all built with a dedicated wire chase (wireway) in the back to allow safe cable entry (via conduit) from the bottom. Roam's MTS panels all use Open (Open Transition) transfer switches, with On-Off-On corresponding to Utility-Off-Generator positions.

Roam's MTC 7003 ES2Kv series 200 Amp Manual Transfer Switch boxes accept either #2 to 2/0 or 2/0 to 4/0 cables via Cam-Lock plugs on the generator cable side, and from 6 AWG to 350 MCM cables on the internal wireway side. All cables used should be specified by a qualified electrical designer or electrician to support the maximum possible current draw through a specific connection.

Roam offers MTC 7003 ES2Kv series 200 Amp Manual Transfer Switches in models that support up to 240 VAC (120v, 208v, 230v, 240v)—MTC 7003 ES2K2, up to 480 VAC (277v, 330v, 440v, 480v)—MTC 7003 ES2K4-BOY, and up to 600 VAC (575v, 577v, 600v)—MTC 7003 ES2K6, which are UL Listed at those voltage levels. Brown-Orange color coding (for labels, Cam-Locks, & Cam-Lock spring caps) is normally used for most 480 VAC applications.

New from Roam TechnologiesSingle Phase/200 Amp Manual Transfer Switch Panels with Cam-Lock ConnectorsRoam's MTC 7001 ES2...
08/27/2021

New from Roam Technologies
Single Phase/200 Amp Manual Transfer Switch Panels with Cam-Lock Connectors

Roam's MTC 7001 ES2Kv series ("v" = Voltage Code) of 200 Amp Manual Transfer Switch panels provide a secure and easy-to-connect Cam-Lock connection between a generator and building main power, letting you switch a building main circuits (by means of physically turning a switch) between utility power and generator power. Roam's Manual Transfer Switch (MTS) panels combine a Generator Connection Box and a Transfer Switch, providing a single-panel solution for exterior connection and switching of emergency power. Roam's MTS panels are UL 1008 listed and use E1016 (J-Series/16 Series) Male Cam-Lock connectors.

Roam's line of MTS panels includes Service Entry Rated panels, Switched Neutral panels, and panels with no Neutral connection. These panels are all built with a dedicated wire chase (wireway) in the back to allow safe cable entry (via conduit) from the bottom. Roam's MTS panels all use Open (Open Transition) transfer switches, with On-Off-On corresponding to Utility-Off-Generator positions.

New From Roam Technologies: 150 Amp Mini Cam-Lock Power Input PanelsRoam's MTC® 6003 IESMKv Mini Cam-Lock series ("v" = ...
12/29/2020

New From Roam Technologies: 150 Amp Mini Cam-Lock Power Input Panels

Roam's MTC® 6003 IESMKv Mini Cam-Lock series ("v" = Voltage Code) of Power Input Panels provides a rugged and cost-effective exterior connection point temporary power input to trailers, buses, or temporary structures.

Roam's line of Mini Cam-Lock panels offer a lower power alternative to our standard 16-Series Cam-Lock panels. The Mini Cam-Lock panels support up to 150A using Marinco* brand 15-Series cam-lock connectors. Note that Mini Cam-Lock connectors are smaller than and not compatible with 16-series standard Cam-Lock connectors. These panels are made with Spring Cap covers for the connectors (to protect against dust or insects). The Mini Cam-Lock Power Input Panels ARE NOT UL listed.

New From Roam Technologies: 150 Amp Mini Cam-Lock Power Output PanelsRoam's MTC® 6003 OESMKv Mini Cam-Lock series ("v" =...
12/29/2020

New From Roam Technologies: 150 Amp Mini Cam-Lock Power Output Panels

Roam's MTC® 6003 OESMKv Mini Cam-Lock series ("v" = Voltage Code) of Power Output Panels provides a rugged and cost-effective exterior connection point for external or internal power loads.

Roam's line of Mini Cam-Lock panels offer a lower power alternative to our standard 16-Series Cam-Lock panels. The Mini Cam-Lock panels support up to 150A using Marinco* brand 15-Series cam-lock connectors. Note that Mini Cam-Lock connectors are smaller than and not compatible with 16-series standard Cam-Lock connectors. These panels are made with Spring Cap covers for the connectors (to protect against dust or insects). Power Output Panels like those made by Roam are also known in various industries under other names such as Outlet Panels, Docking Stations, or Tap Boxes. These Power Output Panels are part of Roam's UL Listed (US & Canada) line of Cam-Lock Panels.

New From Roam Technologies: 150 Amp Mini Cam-Lock Generator Interface PanelsRoam's MTC® 6003 ESMKv Mini Cam-Lock series ...
12/29/2020

New From Roam Technologies: 150 Amp Mini Cam-Lock Generator Interface Panels

Roam's MTC® 6003 ESMKv Mini Cam-Lock series ("v" = Voltage Code) of Generator Interface Panels (Gen Boxes) provide a rugged and cost-effective exterior connection point for emergency or supplementary power.

Roam's line of Mini Cam-Lock panels offer a lower power alternative to our standard 16-Series Cam-Lock panels. The Mini Cam-Lock panels support up to 150A using Marinco* brand 15-Series cam-lock connectors. Note that Mini Cam-Lock connectors are smaller than and not compatible with 16-series standard Cam-Lock connectors. These panels are made with Spring Cap covers for the connectors (to protect against dust or insects). Generator Interface Panels like those made by Roam are also known in various industries under other names such as Generator Connector Panels, Tap Boxes, Inlet Boxes, Docking Stations, Generator Plugs, and Generator Quick Connects. The Mini Cam-Lock Geneator Interface Panels ARE NOT UL listed.

New From Roam Technologies: 1200 Amp Power Input PanelsSupporting up to 1200 Amps, Roam's MTC® 6003 IES12KvB series ("v"...
12/29/2020

New From Roam Technologies: 1200 Amp Power Input Panels

Supporting up to 1200 Amps, Roam's MTC® 6003 IES12KvB series ("v" = Voltage Code) of Power Input Panels provides a rugged and cost-effective, exterior connection point for temporary power input to trailers, buses, or temporary structures. Roam's 1200A Power Input Panels use E1016 (J-Series/16-Series) Male Cam-Lok* brand connectors in three rows of 400A (max) connectors bus-barred together allows the panel to support up to 1200A.

The standard in safety and outdoor reliability, Roam's line of Power Input Panels (also known as Tap Boxes or Inlet Boxes) makes connecting a temporary power input to line power output from a building fast, easy, and most importantly—safe. The MTC 6003 IES12KvB line is part of Roam's UL Listed (US & Canada) series of three-phase Power Input Panels. Roam uses genuine Cooper Crouse-Hinds Cam-Lok* brand connectors. Similar compatible connectors are sometimes referred to as "Cam-Lock" connectors by their manufacturers, distributors, and/or users. These Power Input Panels are part of Roam's UL Listed (US & Canada) line of Cam-Lock Panels.

New From Roam Technologies: 1200 Amp Power Output PanelsSupporting up to 1200 Amps, Roam's MTC® 6003 OES12KvB series ("v...
12/29/2020

New From Roam Technologies: 1200 Amp Power Output Panels

Supporting up to 1200 Amps, Roam's MTC® 6003 OES12KvB series ("v" = Voltage Code) of Power Output Panels provides a rugged and cost-effective, exterior connection point for high-capacity external power loads. Roam's 1200A Power Output Panels use E1016 (J-Series/16-Series) Female Cam-Lok* connectors in three rows of 400A (max) connectors bus-barred together allows the panel to support up to 1200A.

The standard in safety and outdoor reliability, Roam's line of Power Output Panels makes connecting building (line) power to external or internal loads fast, easy, and most importantly—safe. These Power Output Panels are part of Roam's UL Listed (US & Canada) line of Cam-Lock Panels.

Like the rest of Roam's line of Power Output Panels (also known as Outlet Panels, Docking Stations, or Tap Boxes), the MTC 6003 OES12KvB series offers a safe, secure power output connection point for external loads such as lighting, mobile equipment, booths, test load banks, or entertainment venue power. The MTC 6003 OES12KvB line is part of Roam's UL Listed (US & Canada) series of three-phase Power Output Panels. Roam uses genuine Cooper Crouse-Hinds Cam-Lok* brand connectors. Similar compatible connectors are sometimes referred to as "Cam-Lock" connectors by their manufacturers, distributors, and/or users.

New From Roam Technologies: 1200 Amp Generator Interface PanelsSupporting up to 1200 Amps, Roam's MTC® 6003 ES12KvB seri...
12/29/2020

New From Roam Technologies: 1200 Amp Generator Interface Panels

Supporting up to 1200 Amps, Roam's MTC® 6003 ES12KvB series ("v" = Voltage Code) of Generator Interface Panels (Gen Boxes) provide a rugged and cost-effective exterior connection point for high-capacity emergency power. Roam's 1200A Generator Interface Panels use E1016 (J-Series/16-Series) Male Cam-Lok* brand connectors in three rows of 400A (max) connectors bus-barred together, allowing the panel to support up to 1200A.

The standard in safety and outdoor reliability. Roam's line of Generator Interface Panels makes connecting a portable generator to your site fast, easy, and most importantly—safe. The MTC 6003 ES12KvB line is part of Roam's UL Listed (US & Canada) series of three-phase Generator Interface Panels. Generator Interface Panels like those made by Roam are also known in various industries under other names such as Generator Connector Panels, Tap Boxes, Inlet Boxes, Docking Stations, Generator Plugs, and Generator Quick Connects. Roam uses genuine Cooper Crouse-Hinds Cam-Lok* brand connectors. Similar compatible connectors are sometimes referred to as "Cam-Lock" connectors by their manufacturers, distributors, and/or users.

Address

2268 Green Oaks Road
Fort Worth, TX
76116

Opening Hours

Monday 8am - 7pm
Tuesday 8am - 7pm
Wednesday 8am - 7pm
Thursday 8am - 7pm
Friday 8am - 7pm

Telephone

+18889667626

Website

Alerts

Be the first to know and let us send you an email when Roam Technologies posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Roam Technologies:

Shortcuts

Share

Category