mtc screens

Call Directions Website

mtc screens World leader in drop in replacement touch screen LCD's, designed specifically for the harsh boating environment.

Our exclusive anti delamination design means you don't have to worry about your screen.

09/16/2026

A pole went straight through this 2023 Tige CLEAR 10.6 display. Most owners assume cracked glass means buying a whole new unit from the dealer. This one came to us instead. We replaced the damaged components with brand new parts, including our improved touch digitizer, resealed it watertight, and sent it back ready for the water. The owner kept about $5,000 in his pocket and told us the savings are covering his fuel for the season.

Cracked glass or frozen, unresponsive touch zones on your Tige CLEAR? mtcscreens.com

BoatLife BoatingSeason MTCScreens

09/01/2026

Nautique owners: a Linc screen stuck on the boot page does not mean you need a new display.

This 2013 Nautique Linc 2.0 came in powering up to the Nautique loading screen and never advancing. We see this frequently on Linc systems from this era, along with ghost touch and dead zones on the touch versions. It is normal for the internal electronics to give out after a decade at the helm, and the unit hangs before it can finish starting up.

In our new video we show why it happens and how our mail-in repair service handles it. We replace the failed components with brand new parts, reuse your good motherboard and housing, reseal the unit watertight, and ship it back in 3 days or less. No programming, all settings preserved. $2,200 with pay after repair available, saving you $2,800+ vs a $5,000+ new unit. There is even a checkbox on the order page for units stuck on booting or showing a black screen.

Fits Nautique Linc systems 2012 to 2017 and the wider HV700 family across Mastercraft, Supra, Tige, Centurion, Regal and more. Check the back label for HV700, HV700HB, HV700T, or HV700BP.

mtcscreens.com

MarineElectronics ScreenRepair BoatRepair MTCScreens

09/01/2026

Before: horizontal lines marching across the HV700 like a barcode. After: a brand new LCD that looks better than the day the boat left the showroom.

These original units use an early generation LCD that has been known to fail with age. Rows of the panel stop displaying correctly and you get stripes, lines, black spots, or a faint image. Heat, UV, and vibration at the helm all speed it along.

In our new video we show why it happens and how we fix it. We replace the failed LCD and digitizer with brand new parts, reuse your good motherboard and housing, reseal the unit watertight, and ship it back in 3 days or less with an updated 800 nit backlight. $2,200 with pay after repair available. Save $2,800+ vs a $5,000+ new unit.

Fits 2012+ Mastercraft, Nautique, Tige, Centurion, Regal, Supra, Premier, South Bay and more. Check the back label for HV700, HV700HB, HV700T, or HV700BP.

mtcscreens.com

ScreenRepair WakeBoat BoatRepair MTCScreens

09/01/2026

A new HV700 display for your Mastercraft runs $5,000+. Our repair is $2,200.

This 2013 Mastercraft came in with frozen, unresponsive touch buttons, and we also commonly see ghost touch or phantom touch on these units, where the screen presses buttons on its own. The cause is an internal touch controller chip that tends to fail after 5 to 7 years of service.

In our new video we show why it happens and how we fix it. We replace the LCD and digitizer with brand new parts, upgrade the touch controller, reuse your good board and housing, and reseal the unit watertight. No programming, all settings preserved, back to you in 3 days or less. Save $2,800+ vs a new unit, and pay after repair is available.

Fits 2012+ Mastercraft, Tige, Centurion, Nautique, Regal, Supra, Premier, South Bay, Harris, Four Winns and more. Check the label on the back for HV700, HV700HB, HV700T, or HV700BP.

mtcscreens.com

ScreenRepair GhostTouch BoatRepair MTCScreens

09/01/2026

The Silver Stripe of Doom.

That shiny silver bar creeping across the top of your Yamaha Connext 7 screen is the first sign of delamination. The optical bonding glue between the cover glass and LCD liquefies in the heat, leaks down, and leaves what looks like water trapped inside the glass. We see this constantly on 2019+ Yamaha AR jet boats, including this 2023 AR.

In our new video we show exactly why it happens and how we fix it permanently. We replace the defective OEM components with our updated anti-delamination design using brand new parts, reuse your good board and housing, and ship it back in 3 days or less. Save $2,500+ vs a new display.

Part numbers F4Y-U8K12-11-00, HV700-TCS, PV700-TCS

mtcscreens.com

MarineElectronics ScreenRepair Delamination BoatRepair MTCScreens

08/14/2026

Frozen touch areas on your MasterCraft Black Label display? We frequently see this exact failure on the 10.6" PV1100 / HV1100 screens found in 2018 to 2024 MasterCraft boats.

This one came off a 2019 MasterCraft. Certain sections of the touch screen stopped responding, leaving the owner locked out of key controls at the helm.

Common symptoms:
• Frozen touch areas
• Dead zones and unresponsive sections
• Touch screen not working at all
• LCD glitching

Our mail-in repair fixes both the touch failure and any LCD glitching. Turnaround is 2 days, and no programming is needed. Plug it back in and you're on the water.

Fits MasterCraft part numbers 501300031 and 501300031A.

mtcscreens.com

BoatRepair MarineElectronics TouchScreenRepair WakeBoat BoatLife MTCScreens

07/29/2026

It looks like water got inside your 2015 Malibu 7 inch screen. It is not water.

That is the optical bonding glue between the cover glass and the LCD breaking down and going liquid. It pools, it runs, and it leaves watery blobs and streaks trapped behind the glass where you cannot wipe them away. Most owners first notice it as a bubble or a lifting border in one corner, then watch it creep toward the middle over a season.

That is delamination. Part number 3962956, the 7 inch Viper II display.

We replace the defective OEM components with our updated anti-delamination design using brand new parts. Your original housing, harness, and boat software stay exactly as they are. It plugs back in with clear glass and clean touch.

Mail-in turnaround is 3 days or less. DIY kit and refurbished exchange also available.

mtcscreens.com

touchscreenrepair boatlife mtcscreens

07/21/2026

This 2019 Centurion Fi23 came in completely locked up. The 12.3 inch PV1200 display boots to the warning screen, but the acknowledge button will not register a single tap. The boat cannot leave the lift even though everything else on it works perfectly.

We frequently see this exact failure on the PV1200 platform. The capacitive touch layer tends to lose sensitivity over time, and no reset or software update can bring it back. The fix is replacing the defective OEM components with brand new parts and our updated anti-delamination design. New LCD, new touch digitizer, back in 3 days or less. No programming needed, your settings stay on the boat.

Part numbers 78700619 and SP700TWFJ on the back label. Mail-in repair or DIY kit at mtcscreens.com

MarineElectronics TouchScreenRepair BoatRepair

07/09/2026

Delaminated. Peeling around the border. And now totally frozen, no touch response at all.

That's the trio of failures we see on the 2017+ Nautique LINC Panoray, the 170118 display, the same 12.3 inch screen known as the PV1200 and SP700TWFJ. As it ages, the bonding breaks down, the border starts to lift and peel, and the touch layer gives out until the screen stops responding entirely.

A brand new replacement display runs over $5,000. We refurbish yours with brand new parts, including our updated anti-delamination screen, for a fraction of that. Your settings come back intact, no programming needed.

Get started at mtcscreens.com

#170118 SP700TWFJ PV1200 MarineElectronics BoatRepair WakeBoat MTCScreens

07/05/2026

Big news for 12 inch Medallion Viper II owners. Our replacement screen just got updated for the 2026 season.

The 12 inch Viper II is the display on a lot of 2015 and newer Malibu, Scarab, Sea Ray, Monterey, Four Winns, and other boats, and over time the original tends to delaminate, with the glue bubbling and separating under the glass, along with frozen or unresponsive touch. Our updated screen fixes both, and for 2026 it got even better:

- Brighter and easier to read in direct sunlight
- New cover glass that resists water spots and fingerprints
- Improved anti-delamination bonding for even better durability

Two easy ways to fix yours: mail-in repair or a DIY kit. Your settings stay put, no programming needed, and you save thousands over a dealer replacement.

Get started at mtcscreens.com

Monterey FourWinns MarineElectronics BoatRepair MTCScreens

Address

8821 Business Park Drive #407
Fort Myers, FL
33912

Telephone

+12392377377

Website

Alerts

Be the first to know and let us send you an email when mtc screens posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category